OID reference
1.3.6.1.4.1.1429.77.1.4.11
Setting this object to any value N > 0 will cause the CM to remove a MAC address from its CPE table N seconds after the modem has detected no traffic from it. This feature applies ONLY to devices connected to the CM, not the embedded ones (as MTA or CableHome). NOTE: The default value of 0 means the feature is disable…
Identification
{1 3 6 1 4 1 1429 77 1 4 11}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.1429.77.1.4.11.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
saCmCpeMacAging OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to any value N > 0 will cause the CM to remove a MAC address
from its CPE table N seconds after the modem has detected no traffic from it.
This feature applies ONLY to devices connected to the CM, not the embedded ones
(as MTA or CableHome).
NOTE: The default value of 0 means the feature is disabled."
DEFVAL { 0 }
::= { cmInterfaceInfo 11 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Setting this object to any value N > 0 will cause the CM to remove a MAC address from its CPE table N seconds after the modem has detected no traffic from it. This feature applies ONLY to devices connected to the CM, not the embedded ones (as MTA or CableHome). NOTE: The default value of 0 means the feature is disabled.
Cisco MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: saCmCpeMacAging
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"saCmCpeMacAging",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"UNITS",
[
"literal",
"227365636f6e647322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Setting this object to any value N > 0 will cause the CM to remove a MAC address from its CPE table N seconds after the modem has detected no traffic from it. This feature applies ONLY to devices connected to the CM, not the embedded ones (as MTA or CableHome). NOTE: The default value of 0 means the feature is disabled.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"cmInterfaceInfo",
"11",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
[
"UNITS",
"seconds"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Setting this object to any value N > 0 will cause the CM to remove a MAC address from its CPE table N seconds after the modem has detected no traffic from it. This feature applies ONLY to devices connected to the CM, not the embedded ones (as MTA or CableHome). NOTE: The default value of 0 means the feature is disabled."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the LibreNMS archive. Cisco support.
Module: SA-CM-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'DateAndTime', 'TDomain', 'TAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'Counter32', 'Integer32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1429.77.1.4.7 | cmConsoleMode | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.8 | cmTimerT4 | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.9 | saCmTodRenewal | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.10 | saCmAutoResetNoActivity | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.12 | saCmBpiForward | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.14 | saCmForceDualscan | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.15 | saCmDsBonding | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.33 | saCmDocsisCapableVersion | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.34 | saOorDsidOverride | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.39 | saCmCpeL2VpnMacAging | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.40 | saCmL2VpnUsForwardingCriteria | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.41 | cmEthernetOperTable | 1 | 5 | |
| 1.3.6.1.4.1.1429.77.1.4.42 | cmEthernetIfAdminOverride | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.43 | saCmUsBonding | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.44 | saCmIcmpRateLimit | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.46 | saCmTftpBlockSizeV4 | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.47 | saCmTftpBlockSizeV6 | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.4.48 | saCmUsPowerLimit | 0 | 0 |