OID reference

saRgDeviceLanWlanIsolation

1.3.6.1.4.1.1429.79.2.1.1.7

Description

This MIB is only available in D3.0 products. This MIB does not take effect if the modem is in VLAN mode i.e if saRgIpMgmtLanMode.32=vlan(5). Lan-Wlan Isolation allows you block IP access between CPEs connected to the Ethernet port and Wireless SSIDs. Use this mib in conjunction with saRgDeviceLanLanIsolation and saRgD…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.1429.79.2.1.1 (saRgDeviceBase)
Node code
7
Node name
saRgDeviceLanWlanIsolation
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.1429.79.2.1.1.7
URN notation
urn:oid:1.3.6.1.4.1.1429.79.2.1.1.7
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 1429 79 2 1 1 7}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ciscoSPVTG(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) sa(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ciscoSPVTG(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) sa(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) ciscoSPVTG(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) sa(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) ciscoSPVTG(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) sa(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) ciscoSPVTG(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) sa(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) ciscoSPVTG(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) sa(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) ciscoSPVTG(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) sa(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) ciscoSPVTG(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) sa(1429) saModules(79) saRg(2) saRgDevice(1) saRgDeviceBase(1) saRgDeviceLanWlanIsolation(7)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/1429/79/2/1/1/7
  • /ISO/Identified-Organization/6/1/4/1/1429/79/2/1/1/7
  • /ISO/3/6/1/4/1/1429/79/2/1/1/7
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/1429/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/identified-organization/dod/internet/private/enterprise/ciscoSPVTG/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/identified-organization/dod/internet/private/enterprise/sa/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/identified-organization/dod/internet/private/enterprises/1429/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/identified-organization/dod/internet/private/enterprises/ciscoSPVTG/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/identified-organization/dod/internet/private/enterprises/sa/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/1429/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/ciscoSPVTG/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/sa/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/identified-organization/dod/internet/private/vendor-objects/1429/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/identified-organization/dod/internet/private/vendor-objects/ciscoSPVTG/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/identified-organization/dod/internet/private/vendor-objects/sa/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/org/dod/internet/private/enterprise/1429/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/org/dod/internet/private/enterprise/ciscoSPVTG/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/org/dod/internet/private/enterprise/sa/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • /iso/org/dod/internet/private/enterprises/1429/saModules/saRg/saRgDevice/saRgDeviceBase/saRgDeviceLanWlanIsolation
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current
Default value
0

Enumerated values

ValueName
0disable
1enable

Using this OID with SNMP

At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.

snmpget [connection options] DEVICE .1.3.6.1.4.1.1429.79.2.1.1.7.0

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

saRgDeviceLanWlanIsolation OBJECT-TYPE
    SYNTAX INTEGER {
        disable(0),
        enable(1)
        }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This MIB is only available in D3.0 products.
        This MIB does not take effect if the modem is in VLAN mode i.e if saRgIpMgmtLanMode.32=vlan(5).
        Lan-Wlan Isolation allows you block IP access between CPEs connected to the Ethernet port and
        Wireless SSIDs.
        Use this mib in conjunction with saRgDeviceLanLanIsolation and saRgDot11BssApIsolation.x for
          complete isolation between CPEs connected to the RG.
        This MIB is written to non-vol and set to disable(0) after a factory reset.
        disable(0)- No Isolation
        enable(1)- Enable Isolation feature"
    DEFVAL { 0 }
    ::= { saRgDeviceBase 7 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

This MIB is only available in D3.0 products. This MIB does not take effect if the modem is in VLAN mode i.e if saRgIpMgmtLanMode.32=vlan(5). Lan-Wlan Isolation allows you block IP access between CPEs connected to the Ethernet port and Wireless SSIDs. Use this mib in conjunction with saRgDeviceLanLanIsolation and saRgDot11BssApIsolation.x for complete isolation between CPEs connected to the RG. This MIB is written to non-vol and set to disable(0) after a factory reset. disable(0)- No Isolation enable(1)- Enable Isolation feature

Sources for this description

Cisco MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Cisco MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

saRgDeviceLanWlanIsolation · currentCisco MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: saRgDeviceLanWlanIsolation

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "saRgDeviceLanWlanIsolation",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "disable",
    "(",
    "0",
    ")",
    ",",
    "enable",
    "(",
    "1",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This MIB is only available in D3.0 products. This MIB does not take effect if the modem is in VLAN mode i.e if saRgIpMgmtLanMode.32=vlan(5). Lan-Wlan Isolation allows you block IP access between CPEs connected to the Ethernet port and Wireless SSIDs. Use this mib in conjunction with saRgDeviceLanLanIsolation and saRgDot11BssApIsolation.x for complete isolation between CPEs connected to the RG. This MIB is written to non-vol and set to disable(0) after a factory reset. disable(0)- No Isolation enable(1)- Enable Isolation feature\"",
    "DEFVAL",
    "{",
    "0",
    "}",
    "::=",
    "{",
    "saRgDeviceBase",
    "7",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "disable",
            0
          ],
          [
            "enable",
            1
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This MIB is only available in D3.0 products. This MIB does not take effect if the modem is in VLAN mode i.e if saRgIpMgmtLanMode.32=vlan(5). Lan-Wlan Isolation allows you block IP access between CPEs connected to the Ethernet port and Wireless SSIDs. Use this mib in conjunction with saRgDeviceLanLanIsolation and saRgDot11BssApIsolation.x for complete isolation between CPEs connected to the RG. This MIB is written to non-vol and set to disable(0) after a factory reset. disable(0)- No Isolation enable(1)- Enable Isolation feature"
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      0
    ]
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.1429)

Pechman Tamsen

Siblings (7)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.1429.79.2.1.1.1 saRgDeviceMode00
1.3.6.1.4.1.1429.79.2.1.1.2 saRgDeviceResetDefaultEnable00
1.3.6.1.4.1.1429.79.2.1.1.4 saRgDeviceRemoteWebAccessPort00
1.3.6.1.4.1.1429.79.2.1.1.6 saRgDeviceLanLanIsolation00
1.3.6.1.4.1.1429.79.2.1.1.8 saRgDeviceIpv6Trans00
1.3.6.1.4.1.1429.79.2.1.1.9 saRgDeviceIpv6Passthrough00
1.3.6.1.4.1.1429.79.2.1.1.1002 saRgDeviceFactoryReset00