OID reference
1.3.6.1.4.1.14823.2.3.2.6.8
Whether DHCP is enabled.
Identification
{1 3 6 1 4 1 14823 2 3 2 6 8}
| Value | Name |
|---|---|
| 1 | enabled |
| 2 | disabled |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.14823.2.3.2.6.8.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
netConfigDHCPState OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether DHCP is enabled."
::= { enterpriseApIpMgt 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
HPE networking MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: netConfigDHCPState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"netConfigDHCPState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Whether DHCP is enabled.\"",
"::=",
"{",
"enterpriseApIpMgt",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Whether DHCP is enabled."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: AP80-PRIVATE-MIB
See published definition above
{'SNMPv2-SMI': ['Integer32'], 'RFC1155-SMI': ['mgmt', 'Counter', 'IpAddress', 'enterprises'], 'RFC1213-MIB': ['ifIndex']}Related source files and packages:
Vendor MIB copy from the Netdisco archive.
Module: AP80-PRIVATE-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-SMI': ['Integer32'], 'RFC1155-SMI': ['mgmt', 'Counter', 'IpAddress', 'enterprises'], 'RFC1213-MIB': ['ifIndex']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14823.2.3.2.6.1 | netConfigIPAddress | 0 | 0 | The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConf… |
| 1.3.6.1.4.1.14823.2.3.2.6.2 | netConfigSubnetMask | 0 | 0 | The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netCon… |
| 1.3.6.1.4.1.14823.2.3.2.6.3 | netConfigDefaultGateway | 0 | 0 | The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0. |
| 1.3.6.1.4.1.14823.2.3.2.6.4 | netConfigHttpState | 0 | 0 | Whether HTTP is enabled. |
| 1.3.6.1.4.1.14823.2.3.2.6.5 | netConfigHttpPort | 0 | 0 | The port number for HTTP. Default port number is 80. |
| 1.3.6.1.4.1.14823.2.3.2.6.6 | netConfigHttpsState | 0 | 0 | Whether Secure HTTP is enabled. |
| 1.3.6.1.4.1.14823.2.3.2.6.7 | netConfigHttpsPort | 0 | 0 | The port number for Secure HTTP. Default port number is 443. |