PPPoE Control Bytes Received
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.161.19.3.2.2.47
PPPoE Control Bytes Received
Identification
{1 3 6 1 4 1 161 19 3 2 2 47}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.161.19.3.2.2.47.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
pppoeControlBytesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPPoE Control Bytes Received"
::={whispSmStatus 47}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
PPPoE Control Bytes Received
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: pppoeControlBytesReceived
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"pppoeControlBytesReceived",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"PPPoE Control Bytes Received\"",
"::=",
"{",
"whispSmStatus",
"47",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"PPPoE Control Bytes Received"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: WHISP-SM-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'IpAddress', 'Unsigned32'], 'SNMPv2-CONF': ['OBJECT-GROUP'], 'WHISP-TCV2-MIB': ['WhispLUID', 'WhispMACAddress'], 'WHISP-BOX-MIBV2-MIB': ['dhcpRfPublicIp', 'whispBoxEsn'], 'WHISP-GLOBAL-REG-MIB': ['whispModules', 'whispBox', 'whispAps', 'whispSm']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: WHISP-SM-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'IpAddress', 'Unsigned32'], 'SNMPv2-CONF': ['OBJECT-GROUP'], 'WHISP-TCV2-MIB': ['WhispLUID', 'WhispMACAddress'], 'WHISP-BOX-MIBV2-MIB': ['dhcpRfPublicIp', 'whispBoxEsn'], 'WHISP-GLOBAL-REG-MIB': ['whispModules', 'whispBox', 'whispAps', 'whispSm']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.161.19.3.2.2.1 | sessionStatus | 0 | 0 | SM registered or not. |
| 1.3.6.1.4.1.161.19.3.2.2.2 | rssi | 0 | 0 | Radio signal strength index. |
| 1.3.6.1.4.1.161.19.3.2.2.3 | jitter | 0 | 0 | A measure of multipath interference. |
| 1.3.6.1.4.1.161.19.3.2.2.4 | airDelay | 0 | 0 | Round trip delay in 100ns increments. |
| 1.3.6.1.4.1.161.19.3.2.2.5 | radioSlicing, radioSlicingSm | 0 | 0 | Radio slicing value. |
| 1.3.6.1.4.1.161.19.3.2.2.6 | radioTxGain, radioTxGainSm | 0 | 0 | Radio transmission gain setting. |
| 1.3.6.1.4.1.161.19.3.2.2.7 | calibrationStatus | 0 | 0 | Variable to show if RSSI, Radio slicing value and power level are calibrated. |
| 1.3.6.1.4.1.161.19.3.2.2.8 | radioDbm | 0 | 0 | Power level. |
| 1.3.6.1.4.1.161.19.3.2.2.9 | registeredToAp | 0 | 0 | AP MAC address that the SM registered to. |
| 1.3.6.1.4.1.161.19.3.2.2.10 | dhcpCip | 0 | 0 | Assigned IP address to DHCP client. |
| 1.3.6.1.4.1.161.19.3.2.2.11 | dhcpSip | 0 | 0 | Public DHCP server IP. |
| 1.3.6.1.4.1.161.19.3.2.2.12 | dhcpClientLease | 0 | 0 | DHCP client lease time. |
| 1.3.6.1.4.1.161.19.3.2.2.13 | dhcpCSMask | 0 | 0 | Public DHCP server subnet mask. |
| 1.3.6.1.4.1.161.19.3.2.2.14 | dhcpDfltRterIP | 0 | 0 | Public default router IP address. |
| 1.3.6.1.4.1.161.19.3.2.2.15 | dhcpcdns1 | 0 | 0 | Primary public domain name server. |
| 1.3.6.1.4.1.161.19.3.2.2.16 | dhcpcdns2 | 0 | 0 | Secondary public domain name server. |
| 1.3.6.1.4.1.161.19.3.2.2.17 | dhcpcdns3 | 0 | 0 | Third public domain name server. |
| 1.3.6.1.4.1.161.19.3.2.2.18 | dhcpDomName | 0 | 0 | Public domain name server. |
| 1.3.6.1.4.1.161.19.3.2.2.19 | dhcpServerTable | 1 | 4 | The table of DHCP server hosts. |
| 1.3.6.1.4.1.161.19.3.2.2.20 | adaptRate | 0 | 0 | VC dapt rate. |
| 1.3.6.1.4.1.161.19.3.2.2.21 | radioDbmInt | 0 | 0 | Radio power level(integer). |
| 1.3.6.1.4.1.161.19.3.2.2.22 | dfsStatus | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.23 | radioTxPwr | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.24 | activeRegion | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.25 | snmpBerLevel | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.26 | nbBitsRcvd | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.27 | nbPriBitsErr | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.28 | nbSndBitsErr | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.29 | primaryBER | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.30 | secondaryBER | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.31 | totalBER | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.32 | minRSSI | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.33 | maxRSSI | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.34 | minJitter | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.35 | maxJitter | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.36 | smSessionTimer | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.37 | pppoeSessionStatus | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.38 | pppoeSessionID | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.39 | pppoeIPCPAddress | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.40 | pppoeMTUOverrideEn | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.41 | pppoeMTUValue | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.42 | pppoeTimerTypeValue | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.43 | pppoeTimeoutValue | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.44 | pppoeDNSServer1 | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.45 | pppoeDNSServer2 | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.46 | pppoeControlBytesSent | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.48 | pppoeDataBytesSent | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.49 | pppoeDataBytesReceived | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.50 | pppoeEnabledStatus | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.2.2.51 | pppoeTCPMSSClampEnableStatus | 0 | 0 |