OID reference
1.3.6.1.4.1.161.19.3.3.2.250
Control Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast) 0 = MIMO-A 1 = SISO MIMO Control Messages is the recommended and default setting. However, SISO Control Messages can be helpful in talking to subscribers on releases previous to 13.2, which operated in this mode. Not applicable to PMP 450m.
Identification
{1 3 6 1 4 1 161 19 3 3 2 250}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 0 | mimoa | 1, 2 |
| 1 | siso | 1, 2 |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.161.19.3.3.2.250.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
controlMessages OBJECT-TYPE
SYNTAX INTEGER {
siso(1),
mimoa(0)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast)
0 = MIMO-A
1 = SISO
MIMO Control Messages is the recommended and default setting.
However, SISO Control Messages can be helpful in talking to subscribers on releases previous to 13.2, which operated in this mode.
Not applicable to PMP 450m."
::={whispBoxConfig 250}controlMessages OBJECT-TYPE
SYNTAX INTEGER {
siso(1),
mimoa(0)}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Control Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast)
0 = MIMO-A
1 = SISO
MIMO-A Control Messages is the recommended and default setting.
However, SISO Control Messages can be helpful in talking to subscribers on releases previous to 13.2, which operated in this mode.
Not applicable to PMP 450m.
As of 16.1, PMP 430 SMs are no longer supported on the 450 platform.
On that release and forward, this OID is read-only and returns MIMO-A."
::={whispBoxConfig 250}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Control Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast) 0 = MIMO-A 1 = SISO MIMO Control Messages is the recommended and default setting. However, SISO Control Messages can be helpful in talking to subscribers on releases previous to 13.2, which operated in this mode. Not applicable to PMP 450m.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Control Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast) 0 = MIMO-A 1 = SISO MIMO-A Control Messages is the recommended and default setting. However, SISO Control Messages can be helpful in talking to subscribers on releases previous to 13.2, which operated in this mode. Not applicable to PMP 450m. As of 16.1, PMP 430 SMs are no longer supported on the 450 platform. On that release and forward, this OID is read-only and returns MIMO-A.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: controlMessages
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"controlMessages",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"siso",
"(",
"1",
")",
",",
"mimoa",
"(",
"0",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Control Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast) 0 = MIMO-A 1 = SISO MIMO Control Messages is the recommended and default setting. However, SISO Control Messages can be helpful in talking to subscribers on releases previous to 13.2, which operated in this mode. Not applicable to PMP 450m.\"",
"::=",
"{",
"whispBoxConfig",
"250",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"siso",
1
],
[
"mimoa",
0
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Control Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast) 0 = MIMO-A 1 = SISO MIMO Control Messages is the recommended and default setting. However, SISO Control Messages can be helpful in talking to subscribers on releases previous to 13.2, which operated in this mode. Not applicable to PMP 450m."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: WHISP-BOX-MIBV2-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Gauge32', 'IpAddress', 'NOTIFICATION-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['OBJECT-GROUP'], 'WHISP-TCV2-MIB': ['WhispLUID', 'WhispMACAddress', 'EventString'], 'WHISP-GLOBAL-REG-MIB': ['whispModules', 'whispBox']}Related source files and packages:
Status in source: deprecated.
Names: controlMessages
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"controlMessages",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"siso",
"(",
"1",
")",
",",
"mimoa",
"(",
"0",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"deprecated",
"DESCRIPTION",
"\"Control Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast) 0 = MIMO-A 1 = SISO MIMO-A Control Messages is the recommended and default setting. However, SISO Control Messages can be helpful in talking to subscribers on releases previous to 13.2, which operated in this mode. Not applicable to PMP 450m. As of 16.1, PMP 430 SMs are no longer supported on the 450 platform. On that release and forward, this OID is read-only and returns MIMO-A.\"",
"::=",
"{",
"whispBoxConfig",
"250",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"siso",
1
],
[
"mimoa",
0
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"deprecated"
],
[
"DESCRIPTION",
"Control Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast) 0 = MIMO-A 1 = SISO MIMO-A Control Messages is the recommended and default setting. However, SISO Control Messages can be helpful in talking to subscribers on releases previous to 13.2, which operated in this mode. Not applicable to PMP 450m. As of 16.1, PMP 430 SMs are no longer supported on the 450 platform. On that release and forward, this OID is read-only and returns MIMO-A."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: WHISP-BOX-MIBV2-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Gauge32', 'IpAddress', 'NOTIFICATION-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['OBJECT-GROUP'], 'WHISP-TCV2-MIB': ['WhispLUID', 'WhispMACAddress', 'EventString'], 'WHISP-GLOBAL-REG-MIB': ['whispModules', 'whispBox']}Related source files and packages:
Registration