Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"minModRate",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"onex",
"(",
"0",
")",
",",
"twox",
"(",
"1",
")",
",",
"threex",
"(",
"2",
")",
",",
"fourx",
"(",
"3",
")",
",",
"fivex",
"(",
"6",
")",
",",
"sixx",
"(",
"4",
")",
",",
"sevenx",
"(",
"7",
")",
",",
"eightx",
"(",
"5",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Minimum Modulation Rate parameter 0: 1x (MIMO-A QPSK) 1: 2x (MIMO-A QPSK 16-QAM, MIMO-B QPSK) 2: 3x (MIMO-A 64-QAM, and MIMO-B 8-QAM) 3: 4x (MIMO-A 256-QAM, and MIMO-B 16-QAM) 4: 6x (MIMO-B 64-QAM) 5: 8x (MIMO-B 256-QAM) 6: 5x (MIMO-B 32-QAM) 7: 7x (MIMO-B 128-QAM) PTP 450 platform only. Enabling this will prevent the link from bridging traffic when the transmit modulation rate is below this level. This option can be used for redundant PTP links with spanning tree. When the rate drops below this minimum modulation rate, the Ethernet link will be disabled for half a second. This is to alert spanning tree protocols that the link is not up. Enabling this option will also add a small amount of continuous low priority traffic when the link is idle. This is done to ensure the modulation rate is current over the RF link. Use with caution.\"",
"::=",
"{",
"whispBoxConfig",
"284",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"onex",
0
],
[
"twox",
1
],
[
"threex",
2
],
[
"fourx",
3
],
[
"fivex",
6
],
[
"sixx",
4
],
[
"sevenx",
7
],
[
"eightx",
5
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Minimum Modulation Rate parameter 0: 1x (MIMO-A QPSK) 1: 2x (MIMO-A QPSK 16-QAM, MIMO-B QPSK) 2: 3x (MIMO-A 64-QAM, and MIMO-B 8-QAM) 3: 4x (MIMO-A 256-QAM, and MIMO-B 16-QAM) 4: 6x (MIMO-B 64-QAM) 5: 8x (MIMO-B 256-QAM) 6: 5x (MIMO-B 32-QAM) 7: 7x (MIMO-B 128-QAM) PTP 450 platform only. Enabling this will prevent the link from bridging traffic when the transmit modulation rate is below this level. This option can be used for redundant PTP links with spanning tree. When the rate drops below this minimum modulation rate, the Ethernet link will be disabled for half a second. This is to alert spanning tree protocols that the link is not up. Enabling this option will also add a small amount of continuous low priority traffic when the link is idle. This is done to ensure the modulation rate is current over the RF link. Use with caution."
],
null,
null,
null,
null
]
}