To enable or disable double rate.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.161.19.3.3.2.49
To enable or disable double rate.
Identification
{1 3 6 1 4 1 161 19 3 3 2 49}
| Value | Name |
|---|---|
| 0 | disabled |
| 1 | enabled |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.161.19.3.3.2.49.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
twoXRate OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To enable or disable double rate."
::={whispBoxConfig 49}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
To enable or disable double rate.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: obsolete.
Names: twoXRate
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"twoXRate",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disabled",
"(",
"0",
")",
",",
"enabled",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"obsolete",
"DESCRIPTION",
"\"To enable or disable double rate.\"",
"::=",
"{",
"whispBoxConfig",
"49",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disabled",
0
],
[
"enabled",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"obsolete"
],
[
"DESCRIPTION",
"To enable or disable double rate."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: WHISP-BOX-MIBV2-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Gauge32', 'IpAddress', 'NOTIFICATION-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['OBJECT-GROUP'], 'WHISP-TCV2-MIB': ['WhispLUID', 'WhispMACAddress', 'EventString'], 'WHISP-GLOBAL-REG-MIB': ['whispModules', 'whispBox']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.161.19.3.3.2.1 | linkNegoSpeed | 0 | 0 | Link negotiation speeds. H10BT F10BT H100BT F100BT Separate the values with comma when doing a set. e.g. H10BT,F10BT,H100BT,F100BT |
| 1.3.6.1.4.1.161.19.3.3.2.2 | colorCode | 0 | 0 | Color code. |
| 1.3.6.1.4.1.161.19.3.3.2.3 | displayOnlyAccess | 0 | 0 | Display only password. |
| 1.3.6.1.4.1.161.19.3.3.2.4 | fullAccess | 0 | 0 | Full access password. |
| 1.3.6.1.4.1.161.19.3.3.2.5 | webAutoUpdate | 0 | 0 | Web page auto update in seconds. 0 means disabled. |
| 1.3.6.1.4.1.161.19.3.3.2.6 | pass1Status | 0 | 0 | Password 1(display only) status. |
| 1.3.6.1.4.1.161.19.3.3.2.7 | pass2Status | 0 | 0 | Password 2(full access) status. |
| 1.3.6.1.4.1.161.19.3.3.2.8 | bridgeEntryTimeout | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.9 | snmpMibPerm | 0 | 0 | Read/Write permission for MIB groups. |
| 1.3.6.1.4.1.161.19.3.3.2.10 | bhTimingMode | 0 | 0 | bhtimingMode |
| 1.3.6.1.4.1.161.19.3.3.2.11 | bhModulation | 0 | 0 | Modulation scheme. For Backhaul units only. Only level 4 backhaul can be changed to 20Mbits/Second. |
| 1.3.6.1.4.1.161.19.3.3.2.12 | powerControl | 0 | 0 | Power control. |
| 1.3.6.1.4.1.161.19.3.3.2.13 | extFilterDelay | 0 | 0 | External Filters Delay. For 900MHz radios only. |
| 1.3.6.1.4.1.161.19.3.3.2.14 | antennaGain | 0 | 0 | Antenna gain. For 5.7AGHz radios only. |
| 1.3.6.1.4.1.161.19.3.3.2.15 | eirp | 0 | 0 | This variable is deprecated. |
| 1.3.6.1.4.1.161.19.3.3.2.16 | dynamicLearning | 0 | 0 | To enable VLAN dynamic learning. |
| 1.3.6.1.4.1.161.19.3.3.2.17 | managementVID | 0 | 0 | Management VLAN VID. |
| 1.3.6.1.4.1.161.19.3.3.2.18 | agingTimeout | 0 | 0 | Aging timeout. |
| 1.3.6.1.4.1.161.19.3.3.2.19 | frameType | 0 | 0 | Allow only tagged frame. |
| 1.3.6.1.4.1.161.19.3.3.2.20 | addVlanMember | 0 | 0 | Add VLAN memeber. |
| 1.3.6.1.4.1.161.19.3.3.2.21 | removeVlanMember | 0 | 0 | Remove VLAN memeber. |
| 1.3.6.1.4.1.161.19.3.3.2.22 | scheduling | 0 | 0 | To use hardware or software scheduling |
| 1.3.6.1.4.1.161.19.3.3.2.23 | transmitterOP | 0 | 0 | Transmitter output power. |
| 1.3.6.1.4.1.161.19.3.3.2.24 | bridgeEnable | 0 | 0 | Disable or enable bridging functionality for a BH unit. |
| 1.3.6.1.4.1.161.19.3.3.2.25 | fecEnable | 0 | 0 | Disable or enable FEC error correction functionality for multipoint units. |
| 1.3.6.1.4.1.161.19.3.3.2.26 | trapIP1 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.27 | trapIP2 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.28 | trapIP3 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.29 | trapIP4 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.30 | trapIP5 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.31 | trapIP6 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.32 | trapIP7 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.33 | trapIP8 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.34 | trapIP9 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.35 | trapIP10 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.36 | commString, commStringRWrite | 0 | 0 | Community string. |
| 1.3.6.1.4.1.161.19.3.3.2.37 | subnetMask | 0 | 0 | Subnet mask for the management IP. |
| 1.3.6.1.4.1.161.19.3.3.2.38 | mngtIP | 0 | 0 | Management IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.39 | allowVIDAccess | 0 | 0 | Allow or disallow local SM management VID access. |
| 1.3.6.1.4.1.161.19.3.3.2.40 | setDefaultPlug | 0 | 0 | If enable parameters are set to Factory Defaults upon default plug detection. |
| 1.3.6.1.4.1.161.19.3.3.2.41 | hwsCompatibility | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.42 | gpsInput | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.43 | ism | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.44 | hiPriority | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.45 | userName | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.46 | userPassword | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.47 | userAccessLevel | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.48 | deleteUser | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.50 | lanDhcpState | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.51 | sessionTimeout | 0 | 0 |