OID reference
1.3.6.1.4.1.161.19.3.3.2.85
Downlink Maximum Modulation Rate 0: 1x (MIMO-A QPSK) 1: 2x (MIMO-A QPSK 16-QAM, and MIMO-B QPSK) 2: 3x (MIMO-A 64-QAM, and MIMO-B 8-QAM) 3: 4x (MIMO-A 256-QAM, and MIMO-B 16-QAM) 4: 6x (MIMO-B 64-QAM) 5: 8x (MIMO-B 256-QAM) 6: 5x (MIMO-B 32-QAM) 7: 7x (MIMO-B 128-QAM) Use radioRateAdaptUL for setting uplink rate adapt.
Identification
{1 3 6 1 4 1 161 19 3 3 2 85}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 0 | onex | 1, 2 |
| 1 | onextwox | 2 |
| 1 | twox | 1 |
| 2 | onextwoxthreex | 2 |
| 2 | threex | 1 |
| 3 | fourx | 1 |
| 3 | onextwoxthreexfourx | 2 |
| 4 | onexmimo | 2 |
| 4 | sixx | 1 |
| 5 | eightx | 1 |
| 5 | onextwoxmimo | 2 |
| 6 | fivex | 1 |
| 7 | onextwoxfourx | 2 |
| 7 | sevenx | 1 |
| 8 | onextwoxfourxsixx | 2 |
| 9 | onextwoxfourxsixxeightx | 2 |
| 10 | onextwoxmimoa | 2 |
| 11 | onextwoxthreexmimoa | 2 |
| 12 | onextwoxthreexfourxmimoa | 2 |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.161.19.3.3.2.85.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
radioRateAdapt OBJECT-TYPE
SYNTAX INTEGER {
onex(0),
twox(1),
threex(2),
fourx(3),
fivex(6),
sixx(4),
sevenx(7),
eightx(5)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Downlink Maximum Modulation Rate
0: 1x (MIMO-A QPSK)
1: 2x (MIMO-A QPSK 16-QAM, and MIMO-B QPSK)
2: 3x (MIMO-A 64-QAM, and MIMO-B 8-QAM)
3: 4x (MIMO-A 256-QAM, and MIMO-B 16-QAM)
4: 6x (MIMO-B 64-QAM)
5: 8x (MIMO-B 256-QAM)
6: 5x (MIMO-B 32-QAM)
7: 7x (MIMO-B 128-QAM)
Use radioRateAdaptUL for setting uplink rate adapt."
::={whispBoxConfig 85}radioRateAdapt OBJECT-TYPE
SYNTAX INTEGER {
onex(0),
onexmimo(4),
onextwox(1),
onextwoxmimo(5),
onextwoxthreex(2),
onextwoxthreexfourx(3),
onextwoxfourx(7),
onextwoxfourxsixx(8),
onextwoxfourxsixxeightx(9),
onextwoxmimoa(10),
onextwoxthreexmimoa(11),
onextwoxthreexfourxmimoa(12)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rate adaptation parameter
0: 1x No rate adaptation (FSK and SISO OFDM QPSK)
1: 1x/2x (FSK and SISO OFDM 16-QAM)
Following are OFDM only:
2: 1x/2x/3x (SISO OFDM 64-QAM)
3: 1x/2x/3x/4x (SISO OFDM 256-QAM) Engineering only
Following are MIMO OFDM only:
4: 1x MIMO-A (QPSK duplicated on both paths)
5: 1x/2x MIMO-B (QPSK on each path)
7: 1x/2x/4x MIMO-B (16-QAM on each path)
8: 1x/2x/4x/6x MIMO-B (64-QAM on each path)
9: 1x/2x/4x/6x/8x MIMO-B (256-QAM on each path)
10: 1x/2x MIMO-A (16-QAM duplicated on both paths)
11: 1x/2x/3x MIMO-A (64-QAM duplicated on both paths)
12: 1x/2x/3x/4x MIMO-A (256-QAM duplicated on both paths)
For PMP 430 radios this applies to Downlink Rate Adapt only.
Use radioRateAdaptUL for setting uplink rate adapt on PMP 430 radios.
For PMP 450 radios, write access for engineering use only."
::={whispBoxConfig 85}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Downlink Maximum Modulation Rate 0: 1x (MIMO-A QPSK) 1: 2x (MIMO-A QPSK 16-QAM, and MIMO-B QPSK) 2: 3x (MIMO-A 64-QAM, and MIMO-B 8-QAM) 3: 4x (MIMO-A 256-QAM, and MIMO-B 16-QAM) 4: 6x (MIMO-B 64-QAM) 5: 8x (MIMO-B 256-QAM) 6: 5x (MIMO-B 32-QAM) 7: 7x (MIMO-B 128-QAM) Use radioRateAdaptUL for setting uplink rate adapt.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Rate adaptation parameter 0: 1x No rate adaptation (FSK and SISO OFDM QPSK) 1: 1x/2x (FSK and SISO OFDM 16-QAM) Following are OFDM only: 2: 1x/2x/3x (SISO OFDM 64-QAM) 3: 1x/2x/3x/4x (SISO OFDM 256-QAM) Engineering only Following are MIMO OFDM only: 4: 1x MIMO-A (QPSK duplicated on both paths) 5: 1x/2x MIMO-B (QPSK on each path) 7: 1x/2x/4x MIMO-B (16-QAM on each path) 8: 1x/2x/4x/6x MIMO-B (64-QAM on each path) 9: 1x/2x/4x/6x/8x MIMO-B (256-QAM on each path) 10: 1x/2x MIMO-A (16-QAM duplicated on both paths) 11: 1x/2x/3x MIMO-A (64-QAM duplicated on both paths) 12: 1x/2x/3x/4x MIMO-A (256-QAM duplicated on both paths) For PMP 430 radios this applies to Downlink Rate Adapt only. Use radioRateAdaptUL for setting uplink rate adapt on PMP 430 radios. For PMP 450 radios, write access for engineering use only.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: radioRateAdapt
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"radioRateAdapt",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"onex",
"(",
"0",
")",
",",
"twox",
"(",
"1",
")",
",",
"threex",
"(",
"2",
")",
",",
"fourx",
"(",
"3",
")",
",",
"fivex",
"(",
"6",
")",
",",
"sixx",
"(",
"4",
")",
",",
"sevenx",
"(",
"7",
")",
",",
"eightx",
"(",
"5",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Downlink Maximum Modulation Rate 0: 1x (MIMO-A QPSK) 1: 2x (MIMO-A QPSK 16-QAM, and MIMO-B QPSK) 2: 3x (MIMO-A 64-QAM, and MIMO-B 8-QAM) 3: 4x (MIMO-A 256-QAM, and MIMO-B 16-QAM) 4: 6x (MIMO-B 64-QAM) 5: 8x (MIMO-B 256-QAM) 6: 5x (MIMO-B 32-QAM) 7: 7x (MIMO-B 128-QAM) Use radioRateAdaptUL for setting uplink rate adapt.\"",
"::=",
"{",
"whispBoxConfig",
"85",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"onex",
0
],
[
"twox",
1
],
[
"threex",
2
],
[
"fourx",
3
],
[
"fivex",
6
],
[
"sixx",
4
],
[
"sevenx",
7
],
[
"eightx",
5
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Downlink Maximum Modulation Rate 0: 1x (MIMO-A QPSK) 1: 2x (MIMO-A QPSK 16-QAM, and MIMO-B QPSK) 2: 3x (MIMO-A 64-QAM, and MIMO-B 8-QAM) 3: 4x (MIMO-A 256-QAM, and MIMO-B 16-QAM) 4: 6x (MIMO-B 64-QAM) 5: 8x (MIMO-B 256-QAM) 6: 5x (MIMO-B 32-QAM) 7: 7x (MIMO-B 128-QAM) Use radioRateAdaptUL for setting uplink rate adapt."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: WHISP-BOX-MIBV2-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Gauge32', 'IpAddress', 'NOTIFICATION-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['OBJECT-GROUP'], 'WHISP-TCV2-MIB': ['WhispLUID', 'WhispMACAddress', 'EventString'], 'WHISP-GLOBAL-REG-MIB': ['whispModules', 'whispBox']}Related source files and packages:
Status in source: current.
Names: radioRateAdapt
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"radioRateAdapt",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"onex",
"(",
"0",
")",
",",
"onexmimo",
"(",
"4",
")",
",",
"onextwox",
"(",
"1",
")",
",",
"onextwoxmimo",
"(",
"5",
")",
",",
"onextwoxthreex",
"(",
"2",
")",
",",
"onextwoxthreexfourx",
"(",
"3",
")",
",",
"onextwoxfourx",
"(",
"7",
")",
",",
"onextwoxfourxsixx",
"(",
"8",
")",
",",
"onextwoxfourxsixxeightx",
"(",
"9",
")",
",",
"onextwoxmimoa",
"(",
"10",
")",
",",
"onextwoxthreexmimoa",
"(",
"11",
")",
",",
"onextwoxthreexfourxmimoa",
"(",
"12",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Rate adaptation parameter 0: 1x No rate adaptation (FSK and SISO OFDM QPSK) 1: 1x/2x (FSK and SISO OFDM 16-QAM) Following are OFDM only: 2: 1x/2x/3x (SISO OFDM 64-QAM) 3: 1x/2x/3x/4x (SISO OFDM 256-QAM) Engineering only Following are MIMO OFDM only: 4: 1x MIMO-A (QPSK duplicated on both paths) 5: 1x/2x MIMO-B (QPSK on each path) 7: 1x/2x/4x MIMO-B (16-QAM on each path) 8: 1x/2x/4x/6x MIMO-B (64-QAM on each path) 9: 1x/2x/4x/6x/8x MIMO-B (256-QAM on each path) 10: 1x/2x MIMO-A (16-QAM duplicated on both paths) 11: 1x/2x/3x MIMO-A (64-QAM duplicated on both paths) 12: 1x/2x/3x/4x MIMO-A (256-QAM duplicated on both paths) For PMP 430 radios this applies to Downlink Rate Adapt only. Use radioRateAdaptUL for setting uplink rate adapt on PMP 430 radios. For PMP 450 radios, write access for engineering use only.\"",
"::=",
"{",
"whispBoxConfig",
"85",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"onex",
0
],
[
"onexmimo",
4
],
[
"onextwox",
1
],
[
"onextwoxmimo",
5
],
[
"onextwoxthreex",
2
],
[
"onextwoxthreexfourx",
3
],
[
"onextwoxfourx",
7
],
[
"onextwoxfourxsixx",
8
],
[
"onextwoxfourxsixxeightx",
9
],
[
"onextwoxmimoa",
10
],
[
"onextwoxthreexmimoa",
11
],
[
"onextwoxthreexfourxmimoa",
12
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Rate adaptation parameter 0: 1x No rate adaptation (FSK and SISO OFDM QPSK) 1: 1x/2x (FSK and SISO OFDM 16-QAM) Following are OFDM only: 2: 1x/2x/3x (SISO OFDM 64-QAM) 3: 1x/2x/3x/4x (SISO OFDM 256-QAM) Engineering only Following are MIMO OFDM only: 4: 1x MIMO-A (QPSK duplicated on both paths) 5: 1x/2x MIMO-B (QPSK on each path) 7: 1x/2x/4x MIMO-B (16-QAM on each path) 8: 1x/2x/4x/6x MIMO-B (64-QAM on each path) 9: 1x/2x/4x/6x/8x MIMO-B (256-QAM on each path) 10: 1x/2x MIMO-A (16-QAM duplicated on both paths) 11: 1x/2x/3x MIMO-A (64-QAM duplicated on both paths) 12: 1x/2x/3x/4x MIMO-A (256-QAM duplicated on both paths) For PMP 430 radios this applies to Downlink Rate Adapt only. Use radioRateAdaptUL for setting uplink rate adapt on PMP 430 radios. For PMP 450 radios, write access for engineering use only."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: WHISP-BOX-MIBV2-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Gauge32', 'IpAddress', 'NOTIFICATION-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['OBJECT-GROUP'], 'WHISP-TCV2-MIB': ['WhispLUID', 'WhispMACAddress', 'EventString'], 'WHISP-GLOBAL-REG-MIB': ['whispModules', 'whispBox']}Related source files and packages:
Registration