Status in source: current.
Names: cfgNetEthSpeed
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cfgNetEthSpeed",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Defines a bitmask containing the possible speed/duplex combinations. * 0x01 (1) = 10Mbit/Half * 0x02 (2) = 10Mbit/Full * 0x04 (4) = 100Mbit/Half * 0x08 (8) = 100Mbit/Full * 0x20 (32) = 1000Mbit/Full When `cfgNetEthSpeed` is **forced(0)** only a single bit may be active. Only 10Mbit and 100Mbit rates are allowed in forced mode. 1000Mbit requires the mode to be auto. When `cfgNetEthSpeed` is **auto(1)** multiple bits may be set which are used to advertise the supported speed/duplex. 1000Mbit/Half is not supported. Applies to AP and STA.\"",
"::=",
"{",
"cfgNetEthernetTableEntry",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Defines a bitmask containing the possible speed/duplex combinations. * 0x01 (1) = 10Mbit/Half * 0x02 (2) = 10Mbit/Full * 0x04 (4) = 100Mbit/Half * 0x08 (8) = 100Mbit/Full * 0x20 (32) = 1000Mbit/Full When `cfgNetEthSpeed` is **forced(0)** only a single bit may be active. Only 10Mbit and 100Mbit rates are allowed in forced mode. 1000Mbit requires the mode to be auto. When `cfgNetEthSpeed` is **auto(1)** multiple bits may be set which are used to advertise the supported speed/duplex. 1000Mbit/Half is not supported. Applies to AP and STA."
],
null,
null,
null,
null
]
}