Status in source: current.
Names: cfgWlanDevPower
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cfgWlanDevPower",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"6",
".",
".",
"50",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Max. limit for wireless output power as effective isotropic radiated power (EIRP) in dBm including array gain and antenna gain. **Note:** This parameter only limits the maximum output power. The effective output power might be lower (regulatory limits, rate depended limits). EIRP (dBm) = antenna port power (dBm) + array gain (dB) + antenna gain (dBi) - The antenna port power in dBm defines the power transmitted per antenna port (chain). - The array gain in dB defines the gain which is achieved by the use of multiple antenna ports (chains). The number of active antenna ports (chains) is defined by `cfgWlanDevTxAntenna`. The array gain depends on number of active antenna ports (chains) as following: - One antenna port (chain) = 0 dB - Two antenna ports (chains) = 3 dB - Three antenna ports (chains) = 5 dB - Four antenna ports (chains) = 6 dB - The antenna gain in dBi defines the gain which is achieved by the antenna. The antenna gain is configured by `cfgWlanDevAntennaGain`. Applies to AP and STA.\"",
"::=",
"{",
"cfgWlanDeviceTableEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
6,
50
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Max. limit for wireless output power as effective isotropic radiated power (EIRP) in dBm including array gain and antenna gain. **Note:** This parameter only limits the maximum output power. The effective output power might be lower (regulatory limits, rate depended limits). EIRP (dBm) = antenna port power (dBm) + array gain (dB) + antenna gain (dBi) - The antenna port power in dBm defines the power transmitted per antenna port (chain). - The array gain in dB defines the gain which is achieved by the use of multiple antenna ports (chains). The number of active antenna ports (chains) is defined by `cfgWlanDevTxAntenna`. The array gain depends on number of active antenna ports (chains) as following: - One antenna port (chain) = 0 dB - Two antenna ports (chains) = 3 dB - Three antenna ports (chains) = 5 dB - Four antenna ports (chains) = 6 dB - The antenna gain in dBi defines the gain which is achieved by the antenna. The antenna gain is configured by `cfgWlanDevAntennaGain`. Applies to AP and STA."
],
null,
null,
null,
null
]
}