Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cfgNlmMonType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"phy",
"(",
"0",
")",
",",
"icmp",
"(",
"1",
")",
",",
"wlan",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Objects which can be monitored. * **phy(0)** monitor checks periodically the link status of the ethernet interfaces defined by `cfgNlmMonInterfaces`. If at least one interface in the list specified is up the monitor is considered up. * **icmp(1)** monitor pings periodically the destination defined by `cfgNlmMonDestination`. If the destination does reply to the ECHO request within the `cfgNlmMonInterval` the monitor is considered up. * **wlan(2)** monitor listens to link status events of the wireless interface defined by `cfgNlmMonInterfaces`. The wlan monitor consists of 3 components: **Long Handoff Detector** - Triggers when after disassociation no authorization event is detected within the configured time in `cfgNlmMonInterval`. **Scan Loop Detector** - Triggers immediately on trap 415. This happens if there is no AP or only a single AP which stays below/above the Handoff thresholds. This trap is only generated when `cfgWlanHoProfile` is set to 2 or higher. **Handoff Loop Detector** - Triggers if there have been `cfgNlmMonCount` number of Handoff events within `cfgNlmMonCount` * (`cfgNlmMonInterval` + `cfgNlmMonScanLoopInterval`). The wlan monitor recovers: **Long Handoff Detector** - Immediately after the next successful authorization. **Scan Loop Detector** - After the time of the last 415 trap event + the configured `cfgNlmMonScanLoopInterval`. When down, this is checked regularly in `cfgNlmMonScanLoopInterval` intervals. **Handoff Loop Detector** - When there are less than `cfgNlmMonCount` Handoff events within the time-window `cfgNlmMonCount` * (`cfgNlmMonInterval` + `cfgNlmMonScanLoopInterval`). When down, this is checked regularly in `cfgNlmMonScanLoopInterval` intervals. **Note**: WLAN monitor is supported for 802.11n products only. Applies to AP and STA.\"",
"::=",
"{",
"cfgNlmMonitorTableEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"phy",
0
],
[
"icmp",
1
],
[
"wlan",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Objects which can be monitored. * **phy(0)** monitor checks periodically the link status of the ethernet interfaces defined by `cfgNlmMonInterfaces`. If at least one interface in the list specified is up the monitor is considered up. * **icmp(1)** monitor pings periodically the destination defined by `cfgNlmMonDestination`. If the destination does reply to the ECHO request within the `cfgNlmMonInterval` the monitor is considered up. * **wlan(2)** monitor listens to link status events of the wireless interface defined by `cfgNlmMonInterfaces`. The wlan monitor consists of 3 components: **Long Handoff Detector** - Triggers when after disassociation no authorization event is detected within the configured time in `cfgNlmMonInterval`. **Scan Loop Detector** - Triggers immediately on trap 415. This happens if there is no AP or only a single AP which stays below/above the Handoff thresholds. This trap is only generated when `cfgWlanHoProfile` is set to 2 or higher. **Handoff Loop Detector** - Triggers if there have been `cfgNlmMonCount` number of Handoff events within `cfgNlmMonCount` * (`cfgNlmMonInterval` + `cfgNlmMonScanLoopInterval`). The wlan monitor recovers: **Long Handoff Detector** - Immediately after the next successful authorization. **Scan Loop Detector** - After the time of the last 415 trap event + the configured `cfgNlmMonScanLoopInterval`. When down, this is checked regularly in `cfgNlmMonScanLoopInterval` intervals. **Handoff Loop Detector** - When there are less than `cfgNlmMonCount` Handoff events within the time-window `cfgNlmMonCount` * (`cfgNlmMonInterval` + `cfgNlmMonScanLoopInterval`). When down, this is checked regularly in `cfgNlmMonScanLoopInterval` intervals. **Note**: WLAN monitor is supported for 802.11n products only. Applies to AP and STA."
],
null,
null,
null,
null
]
}