OID reference

rpcFwFlash

1.3.6.1.4.1.16177.1.400.1.3.2.1

Description

Start download/flash of a new firmware. To flash a new firmware to the device, define a valid URL accessible by the device. Change the firmware URL parameter `setFwFileUrl` in the settings section, if needed. * Writing **flash(2)** to this parameter will download and validate the new firmware file. if the downloaded f…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.16177.1.400.1.3.2 (rpcFirmware)
Node code
1
Node name
rpcFwFlash
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.16177.1.400.1.3.2.1
URN notation
urn:oid:1.3.6.1.4.1.16177.1.400.1.3.2.1
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 16177 1 400 1 3 2 1}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) westermo(16177) products(1) 400 base(1) rpc(3) rpcFirmware(2) rpcFwFlash(1)}
OID-IRI notation
  • /1/3/6/1/4/1/16177/1/400/1/3/2/1
  • /ISO/Identified-Organization/6/1/4/1/16177/1/400/1/3/2/1
  • /ISO/3/6/1/4/1/16177/1/400/1/3/2/1
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/16177/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/identified-organization/dod/internet/private/enterprise/westermo/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/identified-organization/dod/internet/private/enterprises/16177/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/identified-organization/dod/internet/private/enterprises/westermo/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/16177/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/westermo/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/identified-organization/dod/internet/private/vendor-objects/16177/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/identified-organization/dod/internet/private/vendor-objects/westermo/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/org/dod/internet/private/enterprise/16177/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/org/dod/internet/private/enterprise/westermo/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/org/dod/internet/private/enterprises/16177/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/org/dod/internet/private/enterprises/westermo/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/org/dod/internet/private/ldap-enterprise/16177/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/org/dod/internet/private/ldap-enterprise/westermo/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/org/dod/internet/private/vendor-objects/16177/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • /iso/org/dod/internet/private/vendor-objects/westermo/products/400/base/rpc/rpcFirmware/rpcFwFlash
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current

Enumerated values

ValueName
-2flashError
-1downloadError
0nop
1download
2flash
3flashWithConfig

Using this OID with SNMP

At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.

snmpget [connection options] DEVICE .1.3.6.1.4.1.16177.1.400.1.3.2.1.0

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

rpcFwFlash OBJECT-TYPE
        SYNTAX INTEGER { flashError(-2), downloadError(-1), nop(0), download(1), flash(2), flashWithConfig(3) }
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
            "Start download/flash of a new firmware.

             To flash a new firmware to the device, define a valid URL
             accessible by the device. Change the firmware URL parameter
             `setFwFileUrl` in the settings section, if needed.

             * Writing **flash(2)** to this parameter will download and validate
               the new firmware file. if the downloaded file is recognized as a
               valid firmware for this device, it will be flashed to the file
               system of the device.
             * Writing **flashWithConfig(3)** to this parameter will download
               the firmware and the custom config defined with setCfgFileUrl
               and validate the new firmware file. If the download is
               recognized as a valid firmware for this device, it will
               be written to the file system of the device. The supplied
               custom config will be applied after the upgrade.

             Reading this parameter will return the status of the firmware flash
             process. A value of **flashError(-2)** indicates that the flash
             process failed during writing. A return value of
             **downloadError(-1)** indicates the occurrence of an error during
             download or validation of the firmware/config. A value of
             **flash(2)** indicates that the device is currently writing the
             firmware to the file system.

             Applies to AP and STA."
        ::= { rpcFirmware 1 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Start download/flash of a new firmware. To flash a new firmware to the device, define a valid URL accessible by the device. Change the firmware URL parameter `setFwFileUrl` in the settings section, if needed. * Writing **flash(2)** to this parameter will download and validate the new firmware file. if the downloaded file is recognized as a valid firmware for this device, it will be flashed to the file system of the device. * Writing **flashWithConfig(3)** to this parameter will download the firmware and the custom config defined with setCfgFileUrl and validate the new firmware file. If the download is recognized as a valid firmware for this device, it will be written to the file system of the device. The supplied custom config will be applied after the upgrade. Reading this parameter will return the status of the firmware flash process. A value of **flashError(-2)** indicates that the flash process failed during writing. A return value of **downloadError(-1)** indicates the occurrence of an error during download or validation of the firmware/config. A value of **flash(2)** indicates that the device is currently writing the firmware to the file system. Applies to AP and STA.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

rpcFwFlash · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: rpcFwFlash

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "rpcFwFlash",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "flashError",
    "(",
    "-",
    "2",
    ")",
    ",",
    "downloadError",
    "(",
    "-",
    "1",
    ")",
    ",",
    "nop",
    "(",
    "0",
    ")",
    ",",
    "download",
    "(",
    "1",
    ")",
    ",",
    "flash",
    "(",
    "2",
    ")",
    ",",
    "flashWithConfig",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Start download/flash of a new firmware. To flash a new firmware to the device, define a valid URL accessible by the device. Change the firmware URL parameter `setFwFileUrl` in the settings section, if needed. * Writing **flash(2)** to this parameter will download and validate the new firmware file. if the downloaded file is recognized as a valid firmware for this device, it will be flashed to the file system of the device. * Writing **flashWithConfig(3)** to this parameter will download the firmware and the custom config defined with setCfgFileUrl and validate the new firmware file. If the download is recognized as a valid firmware for this device, it will be written to the file system of the device. The supplied custom config will be applied after the upgrade. Reading this parameter will return the status of the firmware flash process. A value of **flashError(-2)** indicates that the flash process failed during writing. A return value of **downloadError(-1)** indicates the occurrence of an error during download or validation of the firmware/config. A value of **flash(2)** indicates that the device is currently writing the firmware to the file system. Applies to AP and STA.\"",
    "::=",
    "{",
    "rpcFirmware",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "flashError",
            -2
          ],
          [
            "downloadError",
            -1
          ],
          [
            "nop",
            0
          ],
          [
            "download",
            1
          ],
          [
            "flash",
            2
          ],
          [
            "flashWithConfig",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Start download/flash of a new firmware. To flash a new firmware to the device, define a valid URL accessible by the device. Change the firmware URL parameter `setFwFileUrl` in the settings section, if needed. * Writing **flash(2)** to this parameter will download and validate the new firmware file. if the downloaded file is recognized as a valid firmware for this device, it will be flashed to the file system of the device. * Writing **flashWithConfig(3)** to this parameter will download the firmware and the custom config defined with setCfgFileUrl and validate the new firmware file. If the download is recognized as a valid firmware for this device, it will be written to the file system of the device. The supplied custom config will be applied after the upgrade. Reading this parameter will return the status of the firmware flash process. A value of **flashError(-2)** indicates that the flash process failed during writing. A return value of **downloadError(-1)** indicates the occurrence of an error during download or validation of the firmware/config. A value of **flash(2)** indicates that the device is currently writing the firmware to the file system. Applies to AP and STA."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.16177)

Øyvind Holmeide