A row in this table represents a pseudo-wire (PW) virtual connection across a packet network. It is indexed by pwIndex, which uniquely identifies a singular connection. A row can be created by an operator command from a management plan of a PE, by signaling or due to autodiscovery process. Operator's command can be issued via non SNMP application; in such case a row will be created implicitly by the agent. The read-create objects in this tables are divided into three categories: 1) Objects that MUST NOT be changed after row creation. These are objects that define basic properties of the PW (for example type, destination, etc.). 2) Objects that MAY be changed when the PW is defined as not active. A change of these objects involves re-signaling of the PW or it might be traffic affecting. PW not active is defined as one of the following conditions: a) The pwRowStatus is notInService(2). b) The pwRowStatus is notReady(3). c) The pwAdminStatus is down(2). If the operator needs to change one of the values for an active row, the operator can either set the pwRowStatus to notInService(2) or set pwAdminStatus to down(2). Signaling (or traffic) is initiated again upon setting the pwRowStatus to active(1) or setting the pwAdminStatus to up(1) or testing(3) respectively. 3) Objects that MAY be changed at any time. By default, all the read-create objects MUST NOT be changed after row creation, unless specifically indicated in the individual object description. Manual entries in this table SHOULD be preserved after a re-boot, the agent MUST ensure the integrity of those entries. If the set of entires of a specific row are found to be non consistent after reboot, the PW pwOperStatus MUST be declared as down(2).
OID reference
pwEntry
1.3.6.1.4.1.164.20.10.1.2.1
Description
A row in this table represents a pseudo-wire (PW) virtual connection across a packet network. It is indexed by pwIndex, which uniquely identifies a singular connection. A row can be created by an operator command from a management plan of a PE, by signaling or due to autodiscovery process. Operator's command can be is…
Identification
Identifier and names
- Parent
- 1.3.6.1.4.1.164.20.10.1.2 (pwTable)
- Node code
- 1
- Node name
- pwEntry
- Category
- SNMP management object
- Numeric OID
- 1.3.6.1.4.1.164.20.10.1.2.1
- URN notation
- urn:oid:1.3.6.1.4.1.164.20.10.1.2.1
ASN.1, OID-IRI and named path variants
- ASN.1 notation
-
{1 3 6 1 4 1 164 20 10 1 2 1}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radExperimental(20) pwStdMIBR(10) pwObjects(1) pwTable(2) pwEntry(1)}
- OID-IRI notation
- /1/3/6/1/4/1/164/20/10/1/2/1
- /ISO/Identified-Organization/6/1/4/1/164/20/10/1/2/1
- /ISO/3/6/1/4/1/164/20/10/1/2/1
- Named path variants
- /iso/identified-organization/dod/internet/private/enterprise/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/identified-organization/dod/internet/private/enterprises/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/identified-organization/dod/internet/private/ldap-enterprise/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/identified-organization/dod/internet/private/vendor-objects/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/org/dod/internet/private/enterprise/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/org/dod/internet/private/enterprises/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/org/dod/internet/private/ldap-enterprise/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/org/dod/internet/private/vendor-objects/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/iso-identified-organization/dod/internet/private/enterprise/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/iso-identified-organization/dod/internet/private/enterprises/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/iso-identified-organization/dod/internet/private/ldap-enterprise/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/iso-identified-organization/dod/internet/private/vendor-objects/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/iso-organization/dod/internet/private/enterprise/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/iso-organization/dod/internet/private/enterprises/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/iso-organization/dod/internet/private/ldap-enterprise/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
- /iso/iso-organization/dod/internet/private/vendor-objects/rad/radExperimental/pwStdMIBR/pwObjects/pwTable/pwEntry
SNMP properties
- Value type
- PwEntry
- Maximum access defined by MIB
- not-accessible
- Status in MIB
- current
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Published definition
The displayed source records contain one distinct definition. Compare its source records.
pwEntry OBJECT-TYPE
SYNTAX PwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a pseudo-wire (PW) virtual
connection across a packet network. It is indexed by
pwIndex, which uniquely identifies a singular
connection.
A row can be created by an operator command from a
management plan of a PE, by signaling or due to autodiscovery
process. Operator's command can be issued via non SNMP
application; in such case a row will be created implicitly
by the agent.
The read-create objects in this tables are divided into
three categories:
1) Objects that MUST NOT be changed after row creation.
These are objects that define basic properties of the
PW (for example type, destination, etc.).
2) Objects that MAY be changed when the PW is
defined as not active. A change of these objects involves
re-signaling of the PW or it might be traffic affecting.
PW not active is defined as one of the following
conditions:
a) The pwRowStatus is notInService(2).
b) The pwRowStatus is notReady(3).
c) The pwAdminStatus is down(2).
If the operator needs to change one of the values for an
active row, the operator can either set the pwRowStatus to
notInService(2) or set pwAdminStatus to down(2).
Signaling (or traffic) is initiated again upon setting
the pwRowStatus to active(1) or setting the pwAdminStatus
to up(1) or testing(3) respectively.
3) Objects that MAY be changed at any time.
By default, all the read-create objects MUST NOT be
changed after row creation, unless specifically indicated
in the individual object description.
Manual entries in this table SHOULD be preserved after a
re-boot, the agent MUST ensure the integrity of those
entries. If the set of entires of a specific row are found to
be non consistent after reboot, the PW pwOperStatus MUST be
declared as down(2).
"
INDEX { pwIndex }
::= { pwTable 1 }
Meaning
Descriptions
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Evidence
Source records
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Records for description 1RAD MIB copies (Observium Community)
pwEntry · currentRAD MIB copies (Observium Community)
Status in source: current.
Names: pwEntry
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"pwEntry",
"OBJECT-TYPE",
"SYNTAX",
"PwEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"A row in this table represents a pseudo-wire (PW) virtual connection across a packet network. It is indexed by pwIndex, which uniquely identifies a singular connection. A row can be created by an operator command from a management plan of a PE, by signaling or due to autodiscovery process. Operator's command can be issued via non SNMP application; in such case a row will be created implicitly by the agent. The read-create objects in this tables are divided into three categories: 1) Objects that MUST NOT be changed after row creation. These are objects that define basic properties of the PW (for example type, destination, etc.). 2) Objects that MAY be changed when the PW is defined as not active. A change of these objects involves re-signaling of the PW or it might be traffic affecting. PW not active is defined as one of the following conditions: a) The pwRowStatus is notInService(2). b) The pwRowStatus is notReady(3). c) The pwAdminStatus is down(2). If the operator needs to change one of the values for an active row, the operator can either set the pwRowStatus to notInService(2) or set pwAdminStatus to down(2). Signaling (or traffic) is initiated again upon setting the pwRowStatus to active(1) or setting the pwAdminStatus to up(1) or testing(3) respectively. 3) Objects that MAY be changed at any time. By default, all the read-create objects MUST NOT be changed after row creation, unless specifically indicated in the individual object description. Manual entries in this table SHOULD be preserved after a re-boot, the agent MUST ensure the integrity of those entries. If the set of entires of a specific row are found to be non consistent after reboot, the PW pwOperStatus MUST be declared as down(2). \"",
"INDEX",
"{",
"pwIndex",
"}",
"::=",
"{",
"pwTable",
"1",
"}"
],
"syntax_tree": [
[
"row",
"PwEntry"
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"A row in this table represents a pseudo-wire (PW) virtual connection across a packet network. It is indexed by pwIndex, which uniquely identifies a singular connection. A row can be created by an operator command from a management plan of a PE, by signaling or due to autodiscovery process. Operator's command can be issued via non SNMP application; in such case a row will be created implicitly by the agent. The read-create objects in this tables are divided into three categories: 1) Objects that MUST NOT be changed after row creation. These are objects that define basic properties of the PW (for example type, destination, etc.). 2) Objects that MAY be changed when the PW is defined as not active. A change of these objects involves re-signaling of the PW or it might be traffic affecting. PW not active is defined as one of the following conditions: a) The pwRowStatus is notInService(2). b) The pwRowStatus is notReady(3). c) The pwAdminStatus is down(2). If the operator needs to change one of the values for an active row, the operator can either set the pwRowStatus to notInService(2) or set pwAdminStatus to down(2). Signaling (or traffic) is initiated again upon setting the pwRowStatus to active(1) or setting the pwAdminStatus to up(1) or testing(3) respectively. 3) Objects that MAY be changed at any time. By default, all the read-create objects MUST NOT be changed after row creation, unless specifically indicated in the individual object description. Manual entries in this table SHOULD be preserved after a re-boot, the agent MUST ensure the integrity of those entries. If the set of entires of a specific row are found to be non consistent after reboot, the PW pwOperStatus MUST be declared as down(2)."
],
null,
null,
[
"INDEX",
[
[
0,
"pwIndex"
]
]
],
null
]
}- RAD MIB copies (Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive. RAD support.
Module: PW-STD-R-MIB
See published definition above
· Download PW-STD-R-MIBModule imports
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'StorageType', 'TimeStamp'], 'SNMPv2-SMI': ['NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'TimeTicks', 'transmission'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'IANA-PWE3-R-MIB': ['IANAPwTypeTC', 'IANAPwPsnTypeTC', 'IANAPwCapabilities'], 'PW-TC-STD-R-MIB': ['PwIndexType', 'PwIndexOrZeroType', 'PwGroupID', 'PwIDType', 'PwOperStatusTC', 'PwAttachmentIdentifierType', 'PwCwStatusTC', 'PwStatus', 'PwFragSize', 'PwFragStatus'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'HC-PerfHist-TC-MIB': ['HCPerfCurrentCount', 'HCPerfIntervalCount', 'HCPerfTimeElapsed', 'HCPerfValidIntervals'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration