pwModuleReadOnlyCompliance

{
  "smi_kind": "MODULE-COMPLIANCE",
  "definition": [
    "pwModuleReadOnlyCompliance",
    "MODULE-COMPLIANCE",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The compliance statement for agents that provide read- only support for PW MIB Module. Such devices can then be monitored but cannot be configured using this MIB module.\"",
    "MODULE",
    "MANDATORY-GROUPS",
    "{",
    "pwBasicGroup",
    "}",
    "GROUP",
    "pwNotificationGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations which can efficiently implement the notifications contained in this group.\"",
    "GROUP",
    "pwPwIdGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations that support the PW ID FEC. \"",
    "GROUP",
    "pwGeneralizedFecGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations that support the generalized PW FEC. \"",
    "GROUP",
    "pwFcsGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations that support FCS retention.\"",
    "GROUP",
    "pwFragGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations that support PW fragmentation. \"",
    "GROUP",
    "pwPwStatusGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations that support PW status notification. \"",
    "GROUP",
    "pwGetNextGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations where the pwIndex may be any arbitary value and the EMS would require retrieval of the next free index.\"",
    "GROUP",
    "pwPriorityGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations that support the controling the PW setup and holding priority.\"",
    "GROUP",
    "pwAttachmentGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations that support attachment of two PWs (PW stitching).\"",
    "GROUP",
    "pwPeformance1DayIntervalGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations that support PW performance gathering in 1 Day intervals.\"",
    "GROUP",
    "pwPerformanceIntervalGeneralGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations that support PW performance gathering in 15 minute intervals.\"",
    "GROUP",
    "pwPeformanceIntervalGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations that support PW performance gathering in 15 minute intervals.\"",
    "GROUP",
    "pwHCPeformanceIntervalGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations where at least one of the interval performance counters wraps around too quickly based on the criteria specified in RFC 2863 for high-capacity counters.\"",
    "GROUP",
    "pwMappingTablesGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations that support reverse mapping of PW indexes to the pwIndex and the peer mapping table.\"",
    "GROUP",
    "pwSignalingGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations that support the PW signaling.\"",
    "GROUP",
    "pwNotificationControlGroup",
    "DESCRIPTION",
    "\"This group is only mandatory for implementations that support the PW notifications.\"",
    "OBJECT",
    "pwType",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwOwner",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwPsnType",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwSetUpPriority",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwHoldingPriority",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwPeerAddrType",
    "SYNTAX",
    "InetAddressType",
    "{",
    "unknown",
    "(",
    "0",
    ")",
    ",",
    "ipv4",
    "(",
    "1",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required. Only unknown(0) and ipv4(1) is required.\"",
    "OBJECT",
    "pwPeerAddr",
    "SYNTAX",
    "InetAddress",
    "(",
    "SIZE",
    "(",
    "0",
    "|",
    "4",
    ")",
    ")",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required. An implementation is only required to support 0, 4 address sizes.\"",
    "OBJECT",
    "pwAttachedPwIndex",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwIfIndex",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwID",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwLocalGroupID",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwGroupAttachmentID",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwLocalAttachmentID",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwPeerAttachmentID",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwCwPreference",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwLocalIfMtu",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwLocalIfString",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwLocalCapabAdvert",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwFragmentCfgSize",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwFcsRetentionCfg",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwOutboundLabel",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwInboundLabel",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwName",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwDescr",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwAdminStatus",
    "SYNTAX",
    "INTEGER",
    "{",
    "up",
    "(",
    "1",
    ")",
    ",",
    "down",
    "(",
    "2",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required. The support of value testing(3) is not required.\"",
    "OBJECT",
    "pwOperStatus",
    "SYNTAX",
    "INTEGER",
    "{",
    "up",
    "(",
    "1",
    ")",
    ",",
    "down",
    "(",
    "2",
    ")",
    ",",
    "notPresent",
    "(",
    "5",
    ")",
    ",",
    "lowerLayerDown",
    "(",
    "6",
    ")",
    "}",
    "DESCRIPTION",
    "\"The support of the values testing(3) and dormant(4) is not required.\"",
    "OBJECT",
    "pwRowStatus",
    "SYNTAX",
    "RowStatus",
    "{",
    "active",
    "(",
    "1",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwStorageType",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwUpDownNotifEnable",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwDeletedNotifEnable",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "pwNotifRate",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "::=",
    "{",
    "pwCompliances",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The compliance statement for agents that provide read- only support for PW MIB Module. Such devices can then be monitored but cannot be configured using this MIB module."
    ],
    null,
    [
      "ComplianceModules",
      [
        [
          null,
          [
            "pwBasicGroup",
            "pwNotificationGroup",
            "pwPwIdGroup",
            "pwGeneralizedFecGroup",
            "pwFcsGroup",
            "pwFragGroup",
            "pwPwStatusGroup",
            "pwGetNextGroup",
            "pwPriorityGroup",
            "pwAttachmentGroup",
            "pwPeformance1DayIntervalGroup",
            "pwPerformanceIntervalGeneralGroup",
            "pwPeformanceIntervalGroup",
            "pwHCPeformanceIntervalGroup",
            "pwMappingTablesGroup",
            "pwSignalingGroup",
            "pwNotificationControlGroup"
          ]
        ]
      ]
    ]
  ]
}