OID reference

pwTDMRate

1.3.6.1.4.1.164.20.13.1.1.1.1

Description

The parameter represents the bit-rate of the TDM service in multiples of the 'basic' 64 Kbit/s rate [TDMCP-EXT]. It complements the definition of pwType used in PW-STD-MIB. For structure-agnostic the following should be used: a) Satop E1 - 32 b) Satop T1 emulation: i) MUST be set to 24 in the basic emulation mode ii) …

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.164.20.13.1.1.1 (pwTDMEntry)
Node code
1
Node name
pwTDMRate
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.164.20.13.1.1.1.1
URN notation
urn:oid:1.3.6.1.4.1.164.20.13.1.1.1.1
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 164 20 13 1 1 1 1}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radExperimental(20) pwTDMMIBR(13) pwTDMObjects(1) pwTDMTable(1) pwTDMEntry(1) pwTDMRate(1)}
OID-IRI notation
  • /1/3/6/1/4/1/164/20/13/1/1/1/1
  • /ISO/Identified-Organization/6/1/4/1/164/20/13/1/1/1/1
  • /ISO/3/6/1/4/1/164/20/13/1/1/1/1
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/identified-organization/dod/internet/private/enterprises/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/identified-organization/dod/internet/private/vendor-objects/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/org/dod/internet/private/enterprise/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/org/dod/internet/private/enterprises/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/org/dod/internet/private/ldap-enterprise/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/org/dod/internet/private/vendor-objects/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/iso-identified-organization/dod/internet/private/enterprise/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/iso-identified-organization/dod/internet/private/enterprises/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/iso-identified-organization/dod/internet/private/ldap-enterprise/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/iso-identified-organization/dod/internet/private/vendor-objects/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/iso-organization/dod/internet/private/enterprise/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/iso-organization/dod/internet/private/enterprises/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/iso-organization/dod/internet/private/ldap-enterprise/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate
  • /iso/iso-organization/dod/internet/private/vendor-objects/rad/radExperimental/pwTDMMIBR/pwTDMObjects/pwTDMTable/pwTDMEntry/pwTDMRate

SNMP properties

Value type
Integer32
Maximum access defined by MIB
read-write
Status in MIB
current
Default value
32

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: pwIndex.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.164.20.13.1.1.1.1

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

pwTDMRate OBJECT-TYPE 
  SYNTAX     Integer32
  MAX-ACCESS    read-write 
  STATUS        current 
  DESCRIPTION 
      "The parameter represents the bit-rate of the TDM service  
       in multiples of the 'basic' 64 Kbit/s rate [TDMCP-EXT]. 
       It complements the definition of pwType used in 
       PW-STD-MIB. 
       For structure-agnostic the following should be used: 
       a) Satop E1 - 32  
       b) Satop T1 emulation: 
          i)   MUST be set to 24 in the basic emulation mode  
          ii)  MUST be set to 25 for the 'Octet-aligned T1' 
               emulation mode 
       c) Satop E3 - 535 
       d) Satop T3 - 699 
       For all kinds of structure-aware emulation, this parameter 
       MUST be set to N where N is the number of DS0 channels 
       in the corresponding attachment circuit." 
  REFERENCE 
   "TDMCP-EXT"  
  DEFVAL { 32 } 
  ::= { pwTDMEntry 1 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The parameter represents the bit-rate of the TDM service in multiples of the 'basic' 64 Kbit/s rate [TDMCP-EXT]. It complements the definition of pwType used in PW-STD-MIB. For structure-agnostic the following should be used: a) Satop E1 - 32 b) Satop T1 emulation: i) MUST be set to 24 in the basic emulation mode ii) MUST be set to 25 for the 'Octet-aligned T1' emulation mode c) Satop E3 - 535 d) Satop T3 - 699 For all kinds of structure-aware emulation, this parameter MUST be set to N where N is the number of DS0 channels in the corresponding attachment circuit.

Sources for this description

RAD MIB copies (Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1RAD MIB copies (Observium Community)1 record · 1 source

Description 1

pwTDMRate · currentRAD MIB copies (Observium Community)1 source

Status in source: current.

Names: pwTDMRate

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "pwTDMRate",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The parameter represents the bit-rate of the TDM service in multiples of the 'basic' 64 Kbit/s rate [TDMCP-EXT]. It complements the definition of pwType used in PW-STD-MIB. For structure-agnostic the following should be used: a) Satop E1 - 32 b) Satop T1 emulation: i) MUST be set to 24 in the basic emulation mode ii) MUST be set to 25 for the 'Octet-aligned T1' emulation mode c) Satop E3 - 535 d) Satop T3 - 699 For all kinds of structure-aware emulation, this parameter MUST be set to N where N is the number of DS0 channels in the corresponding attachment circuit.\"",
    "REFERENCE",
    "\"TDMCP-EXT\"",
    "DEFVAL",
    "{",
    "32",
    "}",
    "::=",
    "{",
    "pwTDMEntry",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The parameter represents the bit-rate of the TDM service in multiples of the 'basic' 64 Kbit/s rate [TDMCP-EXT]. It complements the definition of pwType used in PW-STD-MIB. For structure-agnostic the following should be used: a) Satop E1 - 32 b) Satop T1 emulation: i) MUST be set to 24 in the basic emulation mode ii) MUST be set to 25 for the 'Octet-aligned T1' emulation mode c) Satop E3 - 535 d) Satop T3 - 699 For all kinds of structure-aware emulation, this parameter MUST be set to N where N is the number of DS0 channels in the corresponding attachment circuit."
    ],
    [
      "REFERENCE",
      "TDMCP-EXT"
    ],
    null,
    null,
    [
      "DEFVAL",
      32
    ]
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.164)

Brighitte Shalom

Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.164)

Smadar Tauber

Siblings (10)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.164.20.13.1.1.1.2 pwTDMIfIndex00
1.3.6.1.4.1.164.20.13.1.1.1.3 pwGenTDMCfgIndex00
1.3.6.1.4.1.164.20.13.1.1.1.4 pwRelTDMCfgIndex00
1.3.6.1.4.1.164.20.13.1.1.1.5 pwTDMConfigError00
1.3.6.1.4.1.164.20.13.1.1.1.6 pwTDMTimeElapsed00
1.3.6.1.4.1.164.20.13.1.1.1.7 pwTDMValidIntervals00
1.3.6.1.4.1.164.20.13.1.1.1.8 pwTDMValidDayIntervals00
1.3.6.1.4.1.164.20.13.1.1.1.9 pwTDMCurrentIndications00
1.3.6.1.4.1.164.20.13.1.1.1.10 pwTDMLatchedIndications00
1.3.6.1.4.1.164.20.13.1.1.1.11 pwTDMLastEsTimeStamp00