This object is used to specify the type of test to run for the ISDN-PRI D channel or all channels. There are no results stored locally for a loopback test. Loopback of the whole ISDN-PRI physical user port is supported where all the D and B channels are looped back simultaneously, along with individual loopbackof the D channel. AAL2 Loopback is also supported on the D channel. In order to run these tests, the CO-IWF must first set the value of this object appropriate to the test that needs to be run. The CO-IWF should then set the value of ifAdminStatus in the corresponding ifEntry to 'testing'. The CO-IWF should verify that the test is in progress by checking that the value of ifOperStatus in the corresponding ifEntry is equal to 'testing'. Once testing is complete the CO-IWF must set the ifAdminStatus to a value other than 'testing'. Note that the LES device must not allow a CO-IWF to manipulate the ifAdminStatus of physical user ports that do not belong to its managed CP-IWF.
OID reference
isdnPriPortTestType
1.3.6.1.4.1.164.20.5.1.13.1.6
Description
This object is used to specify the type of test to run for the ISDN-PRI D channel or all channels. There are no results stored locally for a loopback test. Loopback of the whole ISDN-PRI physical user port is supported where all the D and B channels are looped back simultaneously, along with individual loopbackof the …
Identification
Identifier and names
- Parent
- 1.3.6.1.4.1.164.20.5.1.13.1 (cpIwfIsdnPriPortEntry)
- Node code
- 6
- Node name
- isdnPriPortTestType
- Category
- SNMP management object
- Numeric OID
- 1.3.6.1.4.1.164.20.5.1.13.1.6
- URN notation
- urn:oid:1.3.6.1.4.1.164.20.5.1.13.1.6
ASN.1, OID-IRI and named path variants
- ASN.1 notation
-
{1 3 6 1 4 1 164 20 5 1 13 1 6}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radExperimental(20) cpIwfMIB(5) cpIwfMIBObjects(1) cpIwfIsdnPriPortTable(13) cpIwfIsdnPriPortEntry(1) isdnPriPortTestType(6)}
- OID-IRI notation
- /1/3/6/1/4/1/164/20/5/1/13/1/6
- /ISO/Identified-Organization/6/1/4/1/164/20/5/1/13/1/6
- /ISO/3/6/1/4/1/164/20/5/1/13/1/6
- Named path variants
- /iso/identified-organization/dod/internet/private/enterprise/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/identified-organization/dod/internet/private/enterprises/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/identified-organization/dod/internet/private/ldap-enterprise/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/identified-organization/dod/internet/private/vendor-objects/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/org/dod/internet/private/enterprise/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/org/dod/internet/private/enterprises/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/org/dod/internet/private/ldap-enterprise/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/org/dod/internet/private/vendor-objects/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/iso-identified-organization/dod/internet/private/enterprise/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/iso-identified-organization/dod/internet/private/enterprises/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/iso-identified-organization/dod/internet/private/ldap-enterprise/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/iso-identified-organization/dod/internet/private/vendor-objects/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/iso-organization/dod/internet/private/enterprise/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/iso-organization/dod/internet/private/enterprises/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/iso-organization/dod/internet/private/ldap-enterprise/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
- /iso/iso-organization/dod/internet/private/vendor-objects/rad/radExperimental/cpIwfMIB/cpIwfMIBObjects/cpIwfIsdnPriPortTable/cpIwfIsdnPriPortEntry/isdnPriPortTestType
SNMP properties
- Value type
- INTEGER
- Maximum access defined by MIB
- read-write
- Status in MIB
- current
Enumerated values
| Value | Name |
|---|---|
| 1 | physicalPortLoopback |
| 2 | dChannelPhysicalPortLoopback |
| 3 | dChannelAal2Loopback |
Using this OID with SNMP
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In CPIWF-R-MIB, the row index isdnPriPortNumber is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.164.20.5.1.13.1.6.<isdnPriPortNumber>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.164.20.5.1.13.1.6
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Published definition
The displayed source records contain one distinct definition. Compare its source records.
isdnPriPortTestType OBJECT-TYPE
SYNTAX INTEGER {
physicalPortLoopback (1),
dChannelPhysicalPortLoopback (2),
dChannelAal2Loopback (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the type of test to run for
the ISDN-PRI D channel or all channels. There are no results
stored locally for a loopback test.
Loopback of the whole ISDN-PRI physical user port is supported where all
the D and B channels are looped back simultaneously, along
with individual loopbackof the D channel.
AAL2 Loopback is also supported on the D channel.
In order to run these tests, the CO-IWF must first set the value
of this object appropriate to the test that needs to be run.
The CO-IWF should then set the value of ifAdminStatus
in the corresponding ifEntry to 'testing'.
The CO-IWF should verify that the test is in progress by checking
that the value of ifOperStatus in the corresponding ifEntry is
equal to 'testing'. Once testing is complete the CO-IWF must set
the ifAdminStatus to a value other than 'testing'.
Note that the LES device must not allow a CO-IWF to manipulate
the ifAdminStatus of physical user ports that do not belong to
its managed CP-IWF."
::= { cpIwfIsdnPriPortEntry 6 }
Meaning
Descriptions
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Evidence
Source records
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Records for description 1RAD MIB copies (Observium Community)
isdnPriPortTestType · currentRAD MIB copies (Observium Community)
Status in source: current.
Names: isdnPriPortTestType
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"isdnPriPortTestType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"physicalPortLoopback",
"(",
"1",
")",
",",
"dChannelPhysicalPortLoopback",
"(",
"2",
")",
",",
"dChannelAal2Loopback",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to specify the type of test to run for the ISDN-PRI D channel or all channels. There are no results stored locally for a loopback test. Loopback of the whole ISDN-PRI physical user port is supported where all the D and B channels are looped back simultaneously, along with individual loopbackof the D channel. AAL2 Loopback is also supported on the D channel. In order to run these tests, the CO-IWF must first set the value of this object appropriate to the test that needs to be run. The CO-IWF should then set the value of ifAdminStatus in the corresponding ifEntry to 'testing'. The CO-IWF should verify that the test is in progress by checking that the value of ifOperStatus in the corresponding ifEntry is equal to 'testing'. Once testing is complete the CO-IWF must set the ifAdminStatus to a value other than 'testing'. Note that the LES device must not allow a CO-IWF to manipulate the ifAdminStatus of physical user ports that do not belong to its managed CP-IWF.\"",
"::=",
"{",
"cpIwfIsdnPriPortEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"physicalPortLoopback",
1
],
[
"dChannelPhysicalPortLoopback",
2
],
[
"dChannelAal2Loopback",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to specify the type of test to run for the ISDN-PRI D channel or all channels. There are no results stored locally for a loopback test. Loopback of the whole ISDN-PRI physical user port is supported where all the D and B channels are looped back simultaneously, along with individual loopbackof the D channel. AAL2 Loopback is also supported on the D channel. In order to run these tests, the CO-IWF must first set the value of this object appropriate to the test that needs to be run. The CO-IWF should then set the value of ifAdminStatus in the corresponding ifEntry to 'testing'. The CO-IWF should verify that the test is in progress by checking that the value of ifOperStatus in the corresponding ifEntry is equal to 'testing'. Once testing is complete the CO-IWF must set the ifAdminStatus to a value other than 'testing'. Note that the LES device must not allow a CO-IWF to manipulate the ifAdminStatus of physical user ports that do not belong to its managed CP-IWF."
],
null,
null,
null,
null
]
}- RAD MIB copies (Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive. RAD support.
Module: CPIWF-R-MIB
See published definition above
· Download CPIWF-R-MIBModule imports
{'SNMPv2-TC': ['RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Integer32']}Related source files and packages:
Registration
Registration authorities
First Registration Authority (inferred from ancestor 1.3.6.1.4.1.164)
Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.164)
Siblings (6)
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.20.5.1.13.1.1 | isdnPriPortNumber | 0 | 0 | |
| 1.3.6.1.4.1.164.20.5.1.13.1.2 | isdnPriPhysicalPort | 0 | 0 | |
| 1.3.6.1.4.1.164.20.5.1.13.1.3 | isdnPriNumBChannels | 0 | 0 | |
| 1.3.6.1.4.1.164.20.5.1.13.1.4 | isdnPriDAal2ChannelId | 0 | 0 | |
| 1.3.6.1.4.1.164.20.5.1.13.1.5 | isdnPriPortLabel | 0 | 0 | |
| 1.3.6.1.4.1.164.20.5.1.13.1.7 | isdnPriPortChannelsStatus | 0 | 0 |