{1 3 6 1 4 1 164 3 3 1 1 6}
This object shows through which port the traffic is flowing (the current Active Port) when the Backup mechanism exists. When No Backup exists in the device, the value should be: notApplicable(1).
Status in source: current.
Names: sysSaBuActivePort
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sysSaBuActivePort",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"notApplicable",
"(",
"1",
")",
",",
"e1T1orSerial",
"(",
"2",
")",
",",
"eth",
"(",
"3",
")",
",",
"primary",
"(",
"4",
")",
",",
"secondary",
"(",
"5",
")",
",",
"third",
"(",
"6",
")",
",",
"fourth",
"(",
"7",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This object shows through which port the traffic is flowing (the current Active Port) when the Backup mechanism exists. When No Backup exists in the device, the value should be: notApplicable(1).\"",
"::=",
"{",
"sysSa",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"notApplicable",
1
],
[
"e1T1orSerial",
2
],
[
"eth",
3
],
[
"primary",
4
],
[
"secondary",
5
],
[
"third",
6
],
[
"fourth",
7
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object shows through which port the traffic is flowing (the current Active Port) when the Backup mechanism exists. When No Backup exists in the device, the value should be: notApplicable(1)."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-MIB
sysSaBuActivePort OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
e1T1orSerial (2),
eth (3),
primary (4),
secondary (5),
third (6),
fourth (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows through which port the traffic is flowing
(the current Active Port) when the Backup mechanism exists.
When No Backup exists in the device, the value should be: notApplicable(1)."
::= {sysSa 6}{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'InterfaceIndexOrZero', 'ifDescr'], 'APS-MIB': ['apsConfigEntry'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'aal5VccVpi', 'aal5VccVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry', 'atmVclEntry', 'aal5VccEntry'], 'DS1-MIB': ['dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1CurrentIndex', 'dsx1LineIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LoopbackStatus', 'dsx1TotalIndex'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3ConfigEntry', 'dsx3LoopbackStatus'], 'IMA-MIB': ['imaGroupIndex', 'imaLinkIfIndex', 'imaGroupFailureStatus'], 'MAU-MIB': ['rpMauMediaAvailable'], 'ATMF-CES': ['atmfCESCbrIndex', 'atmfCESConfEntry'], 'IPOA-MIB': ['ipoaLisIfMappingEntry'], 'ISDN-MIB': ['isdnSignalingEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['TimeStamp', 'TAddress', 'TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'DateAndTime', 'TruthValue', 'RowPointer'], 'ATM-TC-MIB': ['AtmTrafficDescrParamIndex'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'TimeTicks', 'enterprises', 'IpAddress', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RFC1381-MIB': ['IfIndexType'], 'DIFFSERV-MIB': ['IndexIntegerNextFree', 'IndexInteger'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qVlanStaticEntry'], 'DS0BUNDLE-MIB': ['dsx0BundleEntry'], 'FRNETSERV-MIB': ['frPVCEndptDLCIIndex'], 'FDDI-SMT73-MIB': ['fddimibPORTPCMState'], 'IANAifType-MIB': ['IANAifType'], 'MPLS-TC-STD-MIB': ['MplsLabel', 'MplsTunnelIndex', 'MplsOwner', 'MplsLdpIdentifier', 'MplsLsrIdentifier'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-REPEATER-MIB': ['rptrGroupOperStatus', 'rptrPortOperStatus'], 'MULTI-MEDIA-MIB-TC': ['MmTAddressTag', 'MmEndpointID', 'MmAliasAddress', 'MmH323EndpointType', 'MmGatekeeperID', 'MmAliasTag'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry'], 'HDSL2-SHDSL-LINE-MIB': ['hdsl2ShdslEndpointCurrEntry', 'hdsl2ShdslInvIndex', 'hdsl2ShdslEndpointSide', 'hdsl2ShdslSpanConfProfileEntry'], 'FR-ATM-PVC-SERVICE-IWF-MIB': ['frAtmIwfConnectionEntry']}Related source files and packages:
Downloaded: 2026-10-24T02:13:32.724862+00:00.
Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-Dacs-MIB
sysSaBuActivePort OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
e1T1orSerial (2),
eth (3),
primary (4),
secondary (5),
third (6),
fourth (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows through which port the traffic is flowing
(the current Active Port) when the Backup mechanism exists.
When No Backup exists in the device, the value should be: notApplicable(1)."
::= {sysSa 6}{'RAD-TC': ['SlotType', 'CardType', 'ProtectGroupCmdType', 'ProtectLastSwitchReasonType'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'MacAddress', 'TruthValue'], 'ENTITY-MIB': ['entPhysicalEntry', 'PhysicalIndexOrZero', 'entPhysicalSoftwareRev', 'entPhysicalAlias', 'entPhysicalHardwareRev', 'entPhysicalDescr'], 'SNMPv2-MIB': ['sysName'], 'SNMPv2-SMI': ['Integer32', 'TimeTicks', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY'], 'RAD-GEN-MIB': ['alarmEventLogSourceName', 'alarmEventLogAlarmOrEventId', 'alarmEventLogDescription', 'alarmEventLogSeverity', 'alarmEventLogDateAndTime', 'systemsEvents', 'agnLed', 'alarmEventReason', 'agnThresholdMin', 'agnThresholdMax', 'agnThresholdUom'], 'RAD-SMI-MIB': ['radWan'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'RAD-Protection-MIB': ['protectGroupLastSwitchReason', 'protectGroupLastCmd'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-24T02:13:32.750861+00:00.
Vendor MIB copy from the Netdisco archive.
Module: RAD-MIB
sysSaBuActivePort OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
e1T1orSerial (2),
eth (3),
primary (4),
secondary (5),
third (6),
fourth (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows through which port the traffic is flowing
(the current Active Port) when the Backup mechanism exists.
When No Backup exists in the device, the value should be: notApplicable(1)."
::= {sysSa 6}{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'ifDescr'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry'], 'DS1-MIB': ['dsx1CurrentIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LineIndex', 'dsx1TotalIndex', 'dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1LoopbackStatus'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3LoopbackStatus', 'dsx3ConfigEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['RowStatus', 'DateAndTime', 'TimeStamp', 'TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress', 'RowPointer', 'TruthValue'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['TimeTicks', 'enterprises', 'IpAddress', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Unsigned32', 'Counter64'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanId', 'PortList', 'dot1qVlanStaticEntry'], 'IANAifType-MIB': ['IANAifType'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry']}Related source files and packages:
Downloaded: 2026-10-24T15:28:11.546980+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.3.3.1.1.1 | sysSaSwchStatus | 1 | 1 | This object indicates the status of the switches on the SA unit. Each switch is represented by a bit. The status is a sum of 2**n,… |
| 1.3.6.1.4.1.164.3.3.1.1.2 | sysSaSwRevision | 1 | 1 | This object indicates the Software revision of the system. |
| 1.3.6.1.4.1.164.3.3.1.1.3 | sysSaHwVersion | 1 | 1 | This object indicates the Hardware version of the system. |
| 1.3.6.1.4.1.164.3.3.1.1.4 | sysSaPorts | 1 | 1 | This object indicates the ports that are present in the system. Each possible port is represented by a bit. The value of this obje… |
| 1.3.6.1.4.1.164.3.3.1.1.5 | sysSaReadSwch | 1 | 1 | This object indicates wether the configuration will be read from the DIP switches on the SA (stand alone) unit. Each switch is re… |