OID reference
1.3.6.1.4.1.164.6.2.50.1.10
This parameter determines the Direction of the Alarm Forwarding. unidirectional - alarmForwardingFailPort affects the alarmForwardingToPort. bidirectional - alarmForwardingFailPort affects the alarmForwardingToPort AND vice-versa. For such cases, this value will be selected, instead of entering an additional unidirect…
Identification
{1 3 6 1 4 1 164 6 2 50 1 10}
| Value | Name |
|---|---|
| 1 | unidirectional |
| 2 | bidirectional |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In RAD-MIB, the row index consists of these components in order:
alarmForwardingFailPort (Integer32): one numeric subidentifier for the non-negative value.alarmForwardingToPort (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.164.6.2.50.1.10.<alarmForwardingFailPort>.<alarmForwardingToPort>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.164.6.2.50.1.10
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
alarmForwardingDirection OBJECT-TYPE
SYNTAX INTEGER
{
unidirectional (1),
bidirectional (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter determines the Direction of the Alarm Forwarding.
unidirectional - alarmForwardingFailPort affects the
alarmForwardingToPort.
bidirectional - alarmForwardingFailPort affects the
alarmForwardingToPort AND vice-versa.
For such cases, this value will be selected, instead of
entering an additional unidirectional entry
in the table, where the indexes are swapped."
::= { alarmForwardingEntry 10 }alarmForwardingDirection OBJECT-TYPE
SYNTAX INTEGER
{
unidirectional (1),
bidirectional (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter determines the Direction of the Alarm Forwarding.
unidirectional - alarmForwardingFailPort affects the
alarmForwardingToPort.
bidirectional - alarmForwardingFailPort affects the
alarmForwardingToPort AND vice-versa.
For such cases, this value will be selected, instead of
entering an additional unidirectional entry
in the table, where the indexes are swapped."
::= { alarmForwardingEntry 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This parameter determines the Direction of the Alarm Forwarding. unidirectional - alarmForwardingFailPort affects the alarmForwardingToPort. bidirectional - alarmForwardingFailPort affects the alarmForwardingToPort AND vice-versa. For such cases, this value will be selected, instead of entering an additional unidirectional entry in the table, where the indexes are swapped.
Netdisco MIB archive copiesRAD MIB copies (Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: alarmForwardingDirection
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"alarmForwardingDirection",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"unidirectional",
"(",
"1",
")",
",",
"bidirectional",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This parameter determines the Direction of the Alarm Forwarding. unidirectional - alarmForwardingFailPort affects the alarmForwardingToPort. bidirectional - alarmForwardingFailPort affects the alarmForwardingToPort AND vice-versa. For such cases, this value will be selected, instead of entering an additional unidirectional entry in the table, where the indexes are swapped.\"",
"::=",
"{",
"alarmForwardingEntry",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"unidirectional",
1
],
[
"bidirectional",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This parameter determines the Direction of the Alarm Forwarding. unidirectional - alarmForwardingFailPort affects the alarmForwardingToPort. bidirectional - alarmForwardingFailPort affects the alarmForwardingToPort AND vice-versa. For such cases, this value will be selected, instead of entering an additional unidirectional entry in the table, where the indexes are swapped."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'InterfaceIndexOrZero', 'ifDescr'], 'APS-MIB': ['apsConfigEntry'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'aal5VccVpi', 'aal5VccVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry', 'atmVclEntry', 'aal5VccEntry'], 'DS1-MIB': ['dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1CurrentIndex', 'dsx1LineIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LoopbackStatus', 'dsx1TotalIndex'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3ConfigEntry', 'dsx3LoopbackStatus'], 'IMA-MIB': ['imaGroupIndex', 'imaLinkIfIndex', 'imaGroupFailureStatus'], 'MAU-MIB': ['rpMauMediaAvailable'], 'ATMF-CES': ['atmfCESCbrIndex', 'atmfCESConfEntry'], 'IPOA-MIB': ['ipoaLisIfMappingEntry'], 'ISDN-MIB': ['isdnSignalingEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['TimeStamp', 'TAddress', 'TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'DateAndTime', 'TruthValue', 'RowPointer'], 'ATM-TC-MIB': ['AtmTrafficDescrParamIndex'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'TimeTicks', 'enterprises', 'IpAddress', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RFC1381-MIB': ['IfIndexType'], 'DIFFSERV-MIB': ['IndexIntegerNextFree', 'IndexInteger'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qVlanStaticEntry'], 'DS0BUNDLE-MIB': ['dsx0BundleEntry'], 'FRNETSERV-MIB': ['frPVCEndptDLCIIndex'], 'FDDI-SMT73-MIB': ['fddimibPORTPCMState'], 'IANAifType-MIB': ['IANAifType'], 'MPLS-TC-STD-MIB': ['MplsLabel', 'MplsTunnelIndex', 'MplsOwner', 'MplsLdpIdentifier', 'MplsLsrIdentifier'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-REPEATER-MIB': ['rptrGroupOperStatus', 'rptrPortOperStatus'], 'MULTI-MEDIA-MIB-TC': ['MmTAddressTag', 'MmEndpointID', 'MmAliasAddress', 'MmH323EndpointType', 'MmGatekeeperID', 'MmAliasTag'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry'], 'HDSL2-SHDSL-LINE-MIB': ['hdsl2ShdslEndpointCurrEntry', 'hdsl2ShdslInvIndex', 'hdsl2ShdslEndpointSide', 'hdsl2ShdslSpanConfProfileEntry'], 'FR-ATM-PVC-SERVICE-IWF-MIB': ['frAtmIwfConnectionEntry']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-GEN-MIB
See published definition above
{'IF-MIB': ['ifAlias', 'ifIndex'], 'RAD-TC': ['FileType', 'RadEntityType', 'AlarmForwardingCause'], 'SNMPv2-TC': ['TimeStamp', 'TDomain', 'TAddress', 'TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'DateAndTime', 'RowPointer', 'MacAddress'], 'ENTITY-MIB': ['entPhysicalAlias', 'entPhysicalDescr', 'PhysicalIndexOrZero'], 'SNMPv2-MIB': ['sysName'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'TimeTicks', 'IpAddress', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RAD-SMI-MIB': ['radGen', 'radSpecificDevices', 'systems', 'fileTransfer'], 'IANAifType-MIB': ['IANAifType'], 'BFD-TC-STD-MIB-R': ['BfdDiagTC', 'BfdIntervalTC'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry']}Vendor MIB copy from the Netdisco archive.
Module: RAD-MIB
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'ifDescr'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry'], 'DS1-MIB': ['dsx1CurrentIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LineIndex', 'dsx1TotalIndex', 'dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1LoopbackStatus'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3LoopbackStatus', 'dsx3ConfigEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['RowStatus', 'DateAndTime', 'TimeStamp', 'TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress', 'RowPointer', 'TruthValue'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['TimeTicks', 'enterprises', 'IpAddress', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Unsigned32', 'Counter64'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanId', 'PortList', 'dot1qVlanStaticEntry'], 'IANAifType-MIB': ['IANAifType'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.6.2.50.1.1 | alarmForwardingFailPort | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.50.1.2 | alarmForwardingToPort | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.50.1.3 | alarmForwardingRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.50.1.4 | alarmForwardingRecoveryTime | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.50.1.5 | alarmForwardingGroupConditions | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.50.1.6 | alarmForwardingCause | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.50.1.7 | alarmForwardingRecoveryMode | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.50.1.8 | alarmForwardingRecoveryCommand | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.50.1.9 | alarmForwardingDelay | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.50.1.11 | alarmForwardingAction | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.50.1.12 | alarmForwardingActiveCause | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.50.1.13 | alarmForwardingDescr | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.50.1.14 | alarmForwardingPriorityDecrement | 0 | 0 |