OID reference
1.3.6.1.4.1.164.6.2.52.1.1.10
This object indicates the Clock State. freeRun(1) - Clock recovery is not locked to any clock. frequencyAcquisition(2) - Adaptive clock recovery is learning the frequency. rapidPhaseLock(3) - Clock recovery is in training process till it reaches fine phase lock. finePhaseLock(4) - Clock is locked and clock recovery is…
Identification
{1 3 6 1 4 1 164 6 2 52 1 1 10}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it. Notes below names come from selected MIB definitions.
| Value | Name and source notes | Source variants |
|---|---|---|
| 1 | freeRun | 1, 2 |
| 2 | frequencyAcquisition Synclock 3 state | 1, 2 |
| 3 | rapidPhaseLock Synclock 3 state | 1, 2 |
| 4 | finePhaseLock Synclock 3 state | 1, 2 |
| 5 | holdover FREQ HOLDOVER | 1, 2 |
| 6 | notApplicable | 1, 2 |
| 7 | locking Synclock 4 state | 2 |
| 8 | idle | 2 |
| 9 | frequencyLock Synclock 4 state | 2 |
| 10 | holdoverPackets | 2 |
| 11 | acquiringPackets | 2 |
| 12 | lockPackets | 2 |
| 13 | holdoverPhyPackets | 2 |
| 14 | acquiringPhyPackets | 2 |
| 15 | lockPhyClock | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In RAD-MIB, the row index consists of these components in order:
agnClkSrcPortCnfgIdx (Integer32): one numeric subidentifier for the non-negative value.agnClkSrcPortSrcIdx (INTEGER): one numeric subidentifier for the non-negative value.agnClkSrcPortIdx (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.164.6.2.52.1.1.10.<agnClkSrcPortCnfgIdx>.<agnClkSrcPortSrcIdx>.<agnClkSrcPortIdx>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.164.6.2.52.1.1.10
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
agnClkSrcPortState OBJECT-TYPE
SYNTAX INTEGER
{
freeRun (1),
frequencyAcquisition (2),
rapidPhaseLock (3),
finePhaseLock (4),
holdover (5),
notApplicable (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Clock State.
freeRun(1) -
Clock recovery is not locked to any clock.
frequencyAcquisition(2) -
Adaptive clock recovery is learning the frequency.
rapidPhaseLock(3) -
Clock recovery is in training process till it reaches fine phase lock.
finePhaseLock(4) -
Clock is locked and clock recovery is qualified and stable.
holdover(5) -
Clock recovery is in holdover mode.
notApplicable(6) -
Clock recovery is not applicable.
."
::= { agnClkSrcPortEntry 10 }agnClkSrcPortState OBJECT-TYPE
SYNTAX INTEGER
{
freeRun (1),
frequencyAcquisition (2),
rapidPhaseLock (3),
finePhaseLock (4),
holdover (5),
notApplicable (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Clock State.
freeRun(1) -
Clock recovery is not locked to any clock.
frequencyAcquisition(2) -
Adaptive clock recovery is learning the frequency.
rapidPhaseLock(3) -
Clock recovery is in training process till it reaches fine phase lock.
finePhaseLock(4) -
Clock is locked and clock recovery is qualified and stable.
holdover(5) -
Clock recovery is in holdover mode.
notApplicable(6) -
Clock recovery is not applicable."
::= { agnClkSrcPortEntry 10 }agnClkSrcPortState OBJECT-TYPE
SYNTAX INTEGER
{
freeRun (1),
frequencyAcquisition (2), -- Synclock 3 state
rapidPhaseLock (3), -- Synclock 3 state
finePhaseLock (4), -- Synclock 3 state
holdover (5), -- FREQ HOLDOVER
notApplicable (6),
locking (7), -- Synclock 4 state
idle (8),
frequencyLock (9), -- Synclock 4 state
holdoverPackets (10),
acquiringPackets (11),
lockPackets (12),
holdoverPhyPackets (13),
acquiringPhyPackets (14),
lockPhyClock (15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Frequency Clock State.
freeRun(1) -
Clock recovery is not locked to any clock.
frequencyAcquisition(2) -
Adaptive clock recovery is learning the frequency.
rapidPhaseLock(3) -
Clock recovery is in training process till it reaches fine phase lock.
finePhaseLock(4) -
Clock is locked and clock recovery is qualified and stable.
holdover(5) -
Clock recovery is in holdover mode.
notApplicable(6) -
Clock recovery is not applicable
locking(7) -
Clock recovery is in locking mode."
::= { agnClkSrcPortEntry 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This object indicates the Clock State. freeRun(1) - Clock recovery is not locked to any clock. frequencyAcquisition(2) - Adaptive clock recovery is learning the frequency. rapidPhaseLock(3) - Clock recovery is in training process till it reaches fine phase lock. finePhaseLock(4) - Clock is locked and clock recovery is qualified and stable. holdover(5) - Clock recovery is in holdover mode. notApplicable(6) - Clock recovery is not applicable. .
Description 2
This object indicates the Clock State. freeRun(1) - Clock recovery is not locked to any clock. frequencyAcquisition(2) - Adaptive clock recovery is learning the frequency. rapidPhaseLock(3) - Clock recovery is in training process till it reaches fine phase lock. finePhaseLock(4) - Clock is locked and clock recovery is qualified and stable. holdover(5) - Clock recovery is in holdover mode. notApplicable(6) - Clock recovery is not applicable.
Description 3
This object indicates the Frequency Clock State. freeRun(1) - Clock recovery is not locked to any clock. frequencyAcquisition(2) - Adaptive clock recovery is learning the frequency. rapidPhaseLock(3) - Clock recovery is in training process till it reaches fine phase lock. finePhaseLock(4) - Clock is locked and clock recovery is qualified and stable. holdover(5) - Clock recovery is in holdover mode. notApplicable(6) - Clock recovery is not applicable locking(7) - Clock recovery is in locking mode.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agnClkSrcPortState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agnClkSrcPortState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"freeRun",
"(",
"1",
")",
",",
"frequencyAcquisition",
"(",
"2",
")",
",",
"rapidPhaseLock",
"(",
"3",
")",
",",
"finePhaseLock",
"(",
"4",
")",
",",
"holdover",
"(",
"5",
")",
",",
"notApplicable",
"(",
"6",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the Clock State. freeRun(1) - Clock recovery is not locked to any clock. frequencyAcquisition(2) - Adaptive clock recovery is learning the frequency. rapidPhaseLock(3) - Clock recovery is in training process till it reaches fine phase lock. finePhaseLock(4) - Clock is locked and clock recovery is qualified and stable. holdover(5) - Clock recovery is in holdover mode. notApplicable(6) - Clock recovery is not applicable. .\"",
"::=",
"{",
"agnClkSrcPortEntry",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"freeRun",
1
],
[
"frequencyAcquisition",
2
],
[
"rapidPhaseLock",
3
],
[
"finePhaseLock",
4
],
[
"holdover",
5
],
[
"notApplicable",
6
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the Clock State. freeRun(1) - Clock recovery is not locked to any clock. frequencyAcquisition(2) - Adaptive clock recovery is learning the frequency. rapidPhaseLock(3) - Clock recovery is in training process till it reaches fine phase lock. finePhaseLock(4) - Clock is locked and clock recovery is qualified and stable. holdover(5) - Clock recovery is in holdover mode. notApplicable(6) - Clock recovery is not applicable. ."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: RAD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'ifDescr'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry'], 'DS1-MIB': ['dsx1CurrentIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LineIndex', 'dsx1TotalIndex', 'dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1LoopbackStatus'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3LoopbackStatus', 'dsx3ConfigEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['RowStatus', 'DateAndTime', 'TimeStamp', 'TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress', 'RowPointer', 'TruthValue'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['TimeTicks', 'enterprises', 'IpAddress', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Unsigned32', 'Counter64'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanId', 'PortList', 'dot1qVlanStaticEntry'], 'IANAifType-MIB': ['IANAifType'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry']}Related source files and packages:
Status in source: current.
Names: agnClkSrcPortState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agnClkSrcPortState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"freeRun",
"(",
"1",
")",
",",
"frequencyAcquisition",
"(",
"2",
")",
",",
"rapidPhaseLock",
"(",
"3",
")",
",",
"finePhaseLock",
"(",
"4",
")",
",",
"holdover",
"(",
"5",
")",
",",
"notApplicable",
"(",
"6",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the Clock State. freeRun(1) - Clock recovery is not locked to any clock. frequencyAcquisition(2) - Adaptive clock recovery is learning the frequency. rapidPhaseLock(3) - Clock recovery is in training process till it reaches fine phase lock. finePhaseLock(4) - Clock is locked and clock recovery is qualified and stable. holdover(5) - Clock recovery is in holdover mode. notApplicable(6) - Clock recovery is not applicable.\"",
"::=",
"{",
"agnClkSrcPortEntry",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"freeRun",
1
],
[
"frequencyAcquisition",
2
],
[
"rapidPhaseLock",
3
],
[
"finePhaseLock",
4
],
[
"holdover",
5
],
[
"notApplicable",
6
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the Clock State. freeRun(1) - Clock recovery is not locked to any clock. frequencyAcquisition(2) - Adaptive clock recovery is learning the frequency. rapidPhaseLock(3) - Clock recovery is in training process till it reaches fine phase lock. finePhaseLock(4) - Clock is locked and clock recovery is qualified and stable. holdover(5) - Clock recovery is in holdover mode. notApplicable(6) - Clock recovery is not applicable."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'InterfaceIndexOrZero', 'ifDescr'], 'APS-MIB': ['apsConfigEntry'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'aal5VccVpi', 'aal5VccVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry', 'atmVclEntry', 'aal5VccEntry'], 'DS1-MIB': ['dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1CurrentIndex', 'dsx1LineIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LoopbackStatus', 'dsx1TotalIndex'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3ConfigEntry', 'dsx3LoopbackStatus'], 'IMA-MIB': ['imaGroupIndex', 'imaLinkIfIndex', 'imaGroupFailureStatus'], 'MAU-MIB': ['rpMauMediaAvailable'], 'ATMF-CES': ['atmfCESCbrIndex', 'atmfCESConfEntry'], 'IPOA-MIB': ['ipoaLisIfMappingEntry'], 'ISDN-MIB': ['isdnSignalingEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['TimeStamp', 'TAddress', 'TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'DateAndTime', 'TruthValue', 'RowPointer'], 'ATM-TC-MIB': ['AtmTrafficDescrParamIndex'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'TimeTicks', 'enterprises', 'IpAddress', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RFC1381-MIB': ['IfIndexType'], 'DIFFSERV-MIB': ['IndexIntegerNextFree', 'IndexInteger'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qVlanStaticEntry'], 'DS0BUNDLE-MIB': ['dsx0BundleEntry'], 'FRNETSERV-MIB': ['frPVCEndptDLCIIndex'], 'FDDI-SMT73-MIB': ['fddimibPORTPCMState'], 'IANAifType-MIB': ['IANAifType'], 'MPLS-TC-STD-MIB': ['MplsLabel', 'MplsTunnelIndex', 'MplsOwner', 'MplsLdpIdentifier', 'MplsLsrIdentifier'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-REPEATER-MIB': ['rptrGroupOperStatus', 'rptrPortOperStatus'], 'MULTI-MEDIA-MIB-TC': ['MmTAddressTag', 'MmEndpointID', 'MmAliasAddress', 'MmH323EndpointType', 'MmGatekeeperID', 'MmAliasTag'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry'], 'HDSL2-SHDSL-LINE-MIB': ['hdsl2ShdslEndpointCurrEntry', 'hdsl2ShdslInvIndex', 'hdsl2ShdslEndpointSide', 'hdsl2ShdslSpanConfProfileEntry'], 'FR-ATM-PVC-SERVICE-IWF-MIB': ['frAtmIwfConnectionEntry']}Related source files and packages:
Status in source: current.
Names: agnClkSrcPortState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agnClkSrcPortState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"freeRun",
"(",
"1",
")",
",",
"frequencyAcquisition",
"(",
"2",
")",
",",
"rapidPhaseLock",
"(",
"3",
")",
",",
"finePhaseLock",
"(",
"4",
")",
",",
"holdover",
"(",
"5",
")",
",",
"notApplicable",
"(",
"6",
")",
",",
"locking",
"(",
"7",
")",
",",
"idle",
"(",
"8",
")",
",",
"frequencyLock",
"(",
"9",
")",
",",
"holdoverPackets",
"(",
"10",
")",
",",
"acquiringPackets",
"(",
"11",
")",
",",
"lockPackets",
"(",
"12",
")",
",",
"holdoverPhyPackets",
"(",
"13",
")",
",",
"acquiringPhyPackets",
"(",
"14",
")",
",",
"lockPhyClock",
"(",
"15",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the Frequency Clock State. freeRun(1) - Clock recovery is not locked to any clock. frequencyAcquisition(2) - Adaptive clock recovery is learning the frequency. rapidPhaseLock(3) - Clock recovery is in training process till it reaches fine phase lock. finePhaseLock(4) - Clock is locked and clock recovery is qualified and stable. holdover(5) - Clock recovery is in holdover mode. notApplicable(6) - Clock recovery is not applicable locking(7) - Clock recovery is in locking mode.\"",
"::=",
"{",
"agnClkSrcPortEntry",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"freeRun",
1
],
[
"frequencyAcquisition",
2
],
[
"rapidPhaseLock",
3
],
[
"finePhaseLock",
4
],
[
"holdover",
5
],
[
"notApplicable",
6
],
[
"locking",
7
],
[
"idle",
8
],
[
"frequencyLock",
9
],
[
"holdoverPackets",
10
],
[
"acquiringPackets",
11
],
[
"lockPackets",
12
],
[
"holdoverPhyPackets",
13
],
[
"acquiringPhyPackets",
14
],
[
"lockPhyClock",
15
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the Frequency Clock State. freeRun(1) - Clock recovery is not locked to any clock. frequencyAcquisition(2) - Adaptive clock recovery is learning the frequency. rapidPhaseLock(3) - Clock recovery is in training process till it reaches fine phase lock. finePhaseLock(4) - Clock is locked and clock recovery is qualified and stable. holdover(5) - Clock recovery is in holdover mode. notApplicable(6) - Clock recovery is not applicable locking(7) - Clock recovery is in locking mode."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-Clock-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'ifAlias'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'DateAndTime', 'MacAddress', 'TruthValue'], 'RAD-Pw-MIB': ['peerAddress'], 'SNMPv2-MIB': ['sysName'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RAD-GEN-MIB': ['systemsEvents', 'alarmEventLogSourceName', 'alarmEventAttrName', 'alarmEventAttrDescription', 'systemPort', 'alarmEventConfigSeverity', 'alarmEventLogAlarmOrEventId', 'alarmEventLogDescription', 'alarmEventLogSeverity', 'alarmEventLogDateAndTime', 'alarmEventReason'], 'RAD-SMI-MIB': ['agnt'], 'Q-BRIDGE-MIB': ['VlanIdOrAnyOrNone'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.6.2.52.1.1.1 | agnClkSrcPortCnfgIdx | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.1.1.2 | agnClkSrcPortSrcIdx | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.1.1.3 | agnClkSrcPortIdx | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.1.1.4 | agnClkSrcPort | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.1.1.5 | agnClkSrcPortRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.1.1.6 | agnClkSrcPortAdminStatus | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.1.1.7 | agnClkSrcPortType | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.1.1.8 | agnClkSrcPortQuality | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.1.1.9 | agnClkSrcPortNetType | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.1.1.11 | agnClkSrcPortSrcType | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.1.1.12 | agnClkSrcPortTimeState | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.1.1.13 | agnClkSrcPortDescr | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.1.1.14 | agnClkSrcPortMode | 0 | 0 |