OID reference
1.3.6.1.4.1.164.6.2.52.2.1.7
This object indicates the Current Clock State. freeRun(1) - Current clock state machine is not locked and run from the internal oscillator. rapidPhaseLock(2) - Current clock state machine is locked. finePhaseLock(3) - Current clock state machine is in pre-locking. holdover(4) - Current clock state machine is in holdov…
Identification
{1 3 6 1 4 1 164 6 2 52 2 1 7}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | freeRun | 1, 2 |
| 2 | rapidPhaseLock | 1, 2 |
| 3 | finePhaseLock | 1, 2 |
| 4 | holdover | 1, 2 |
| 5 | frequencyAcquisition | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In RAD-MIB, the row index agnCurrClkObjIdx is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.164.6.2.52.2.1.7.<agnCurrClkObjIdx>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.164.6.2.52.2.1.7
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
agnCurrClkState OBJECT-TYPE
SYNTAX INTEGER
{
freeRun (1),
rapidPhaseLock (2),
finePhaseLock (3),
holdover (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Current Clock State.
freeRun(1) -
Current clock state machine is not locked
and run from the internal oscillator.
rapidPhaseLock(2) -
Current clock state machine is locked.
finePhaseLock(3) -
Current clock state machine is in pre-locking.
holdover(4) -
Current clock state machine is in holdover mode
(due to loss of event).
."
::= { agnCurrClkEntry 7 }agnCurrClkState OBJECT-TYPE
SYNTAX INTEGER
{
freeRun (1),
rapidPhaseLock (2),
finePhaseLock (3),
holdover (4),
frequencyAcquisition (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Current Clock State.
freeRun(1) -
Current clock state machine is not locked
and run from the internal oscillator.
rapidPhaseLock(2) -
Current clock state machine is locked.
finePhaseLock(3) -
Current clock state machine is in pre-locking.
holdover(4) -
Current clock state machine is in holdover mode
(due to loss of event).
frequencyAcquisition(5) -
Adaptive clock recovery is learning the frequency."
::= { agnCurrClkEntry 7 }agnCurrClkState OBJECT-TYPE
SYNTAX INTEGER
{
freeRun (1),
rapidPhaseLock (2),
finePhaseLock (3),
holdover (4),
frequencyAcquisition (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Current Clock State.
freeRun(1) -
Current clock state machine is not locked
and run from the internal oscillator.
rapidPhaseLock(2) -
Current clock state machine is locked.
finePhaseLock(3) -
Current clock state machine is in pre-locking.
holdover(4) -
Current clock state machine is in holdover mode
(due to loss of event).
frequencyAcquisition(5) -
Adaptive clock recovery is learning the frequency."
::= { agnCurrClkEntry 7 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This object indicates the Current Clock State. freeRun(1) - Current clock state machine is not locked and run from the internal oscillator. rapidPhaseLock(2) - Current clock state machine is locked. finePhaseLock(3) - Current clock state machine is in pre-locking. holdover(4) - Current clock state machine is in holdover mode (due to loss of event). .
Description 2
This object indicates the Current Clock State. freeRun(1) - Current clock state machine is not locked and run from the internal oscillator. rapidPhaseLock(2) - Current clock state machine is locked. finePhaseLock(3) - Current clock state machine is in pre-locking. holdover(4) - Current clock state machine is in holdover mode (due to loss of event). frequencyAcquisition(5) - Adaptive clock recovery is learning the frequency.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agnCurrClkState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agnCurrClkState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"freeRun",
"(",
"1",
")",
",",
"rapidPhaseLock",
"(",
"2",
")",
",",
"finePhaseLock",
"(",
"3",
")",
",",
"holdover",
"(",
"4",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the Current Clock State. freeRun(1) - Current clock state machine is not locked and run from the internal oscillator. rapidPhaseLock(2) - Current clock state machine is locked. finePhaseLock(3) - Current clock state machine is in pre-locking. holdover(4) - Current clock state machine is in holdover mode (due to loss of event). .\"",
"::=",
"{",
"agnCurrClkEntry",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"freeRun",
1
],
[
"rapidPhaseLock",
2
],
[
"finePhaseLock",
3
],
[
"holdover",
4
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the Current Clock State. freeRun(1) - Current clock state machine is not locked and run from the internal oscillator. rapidPhaseLock(2) - Current clock state machine is locked. finePhaseLock(3) - Current clock state machine is in pre-locking. holdover(4) - Current clock state machine is in holdover mode (due to loss of event). ."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: RAD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'ifDescr'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry'], 'DS1-MIB': ['dsx1CurrentIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LineIndex', 'dsx1TotalIndex', 'dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1LoopbackStatus'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3LoopbackStatus', 'dsx3ConfigEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['RowStatus', 'DateAndTime', 'TimeStamp', 'TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress', 'RowPointer', 'TruthValue'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['TimeTicks', 'enterprises', 'IpAddress', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Unsigned32', 'Counter64'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanId', 'PortList', 'dot1qVlanStaticEntry'], 'IANAifType-MIB': ['IANAifType'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry']}Related source files and packages:
Status in source: current.
Names: agnCurrClkState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agnCurrClkState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"freeRun",
"(",
"1",
")",
",",
"rapidPhaseLock",
"(",
"2",
")",
",",
"finePhaseLock",
"(",
"3",
")",
",",
"holdover",
"(",
"4",
")",
",",
"frequencyAcquisition",
"(",
"5",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the Current Clock State. freeRun(1) - Current clock state machine is not locked and run from the internal oscillator. rapidPhaseLock(2) - Current clock state machine is locked. finePhaseLock(3) - Current clock state machine is in pre-locking. holdover(4) - Current clock state machine is in holdover mode (due to loss of event). frequencyAcquisition(5) - Adaptive clock recovery is learning the frequency.\"",
"::=",
"{",
"agnCurrClkEntry",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"freeRun",
1
],
[
"rapidPhaseLock",
2
],
[
"finePhaseLock",
3
],
[
"holdover",
4
],
[
"frequencyAcquisition",
5
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the Current Clock State. freeRun(1) - Current clock state machine is not locked and run from the internal oscillator. rapidPhaseLock(2) - Current clock state machine is locked. finePhaseLock(3) - Current clock state machine is in pre-locking. holdover(4) - Current clock state machine is in holdover mode (due to loss of event). frequencyAcquisition(5) - Adaptive clock recovery is learning the frequency."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'InterfaceIndexOrZero', 'ifDescr'], 'APS-MIB': ['apsConfigEntry'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'aal5VccVpi', 'aal5VccVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry', 'atmVclEntry', 'aal5VccEntry'], 'DS1-MIB': ['dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1CurrentIndex', 'dsx1LineIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LoopbackStatus', 'dsx1TotalIndex'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3ConfigEntry', 'dsx3LoopbackStatus'], 'IMA-MIB': ['imaGroupIndex', 'imaLinkIfIndex', 'imaGroupFailureStatus'], 'MAU-MIB': ['rpMauMediaAvailable'], 'ATMF-CES': ['atmfCESCbrIndex', 'atmfCESConfEntry'], 'IPOA-MIB': ['ipoaLisIfMappingEntry'], 'ISDN-MIB': ['isdnSignalingEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['TimeStamp', 'TAddress', 'TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'DateAndTime', 'TruthValue', 'RowPointer'], 'ATM-TC-MIB': ['AtmTrafficDescrParamIndex'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'TimeTicks', 'enterprises', 'IpAddress', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RFC1381-MIB': ['IfIndexType'], 'DIFFSERV-MIB': ['IndexIntegerNextFree', 'IndexInteger'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qVlanStaticEntry'], 'DS0BUNDLE-MIB': ['dsx0BundleEntry'], 'FRNETSERV-MIB': ['frPVCEndptDLCIIndex'], 'FDDI-SMT73-MIB': ['fddimibPORTPCMState'], 'IANAifType-MIB': ['IANAifType'], 'MPLS-TC-STD-MIB': ['MplsLabel', 'MplsTunnelIndex', 'MplsOwner', 'MplsLdpIdentifier', 'MplsLsrIdentifier'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-REPEATER-MIB': ['rptrGroupOperStatus', 'rptrPortOperStatus'], 'MULTI-MEDIA-MIB-TC': ['MmTAddressTag', 'MmEndpointID', 'MmAliasAddress', 'MmH323EndpointType', 'MmGatekeeperID', 'MmAliasTag'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry'], 'HDSL2-SHDSL-LINE-MIB': ['hdsl2ShdslEndpointCurrEntry', 'hdsl2ShdslInvIndex', 'hdsl2ShdslEndpointSide', 'hdsl2ShdslSpanConfProfileEntry'], 'FR-ATM-PVC-SERVICE-IWF-MIB': ['frAtmIwfConnectionEntry']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-Clock-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'ifAlias'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'DateAndTime', 'MacAddress', 'TruthValue'], 'RAD-Pw-MIB': ['peerAddress'], 'SNMPv2-MIB': ['sysName'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RAD-GEN-MIB': ['systemsEvents', 'alarmEventLogSourceName', 'alarmEventAttrName', 'alarmEventAttrDescription', 'systemPort', 'alarmEventConfigSeverity', 'alarmEventLogAlarmOrEventId', 'alarmEventLogDescription', 'alarmEventLogSeverity', 'alarmEventLogDateAndTime', 'alarmEventReason'], 'RAD-SMI-MIB': ['agnt'], 'Q-BRIDGE-MIB': ['VlanIdOrAnyOrNone'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.6.2.52.2.1.1 | agnCurrClkObjIdx | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.2.1.2 | agnCurrClkMode | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.2.1.3 | agnCurrClkSrc | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.2.1.4 | agnCurrClkPort | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.2.1.5 | agnCurrClkHoldover | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.2.1.6 | agnCurrClkSsmBased | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.52.2.1.8 | agnCurrClkQualification | 0 | 0 |