OID reference

swPackActivityState

1.3.6.1.4.1.164.6.2.67.4.1.1.2

Description

Full description and source information

Identification

Identifier and names

Parent: 1.3.6.1.4.1.164.6.2.67.4.1.1 (swPackEntry)
Node code: 2
Node name: swPackActivityState
Category: SNMP management object
Numeric OID: 1.3.6.1.4.1.164.6.2.67.4.1.1.2
URN notation: urn:oid:1.3.6.1.4.1.164.6.2.67.4.1.1.2

ASN.1, OID-IRI and named path variants

ASN.1 notation

{1 3 6 1 4 1 164 6 2 67 4 1 1 2}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rad(164) radGen(6) agnt(2) agnFiles(67) swPack(4) swPackTable(1) swPackEntry(1) swPackActivityState(2)}

OID-IRI notation

/1/3/6/1/4/1/164/6/2/67/4/1/1/2
/ISO/Identified-Organization/6/1/4/1/164/6/2/67/4/1/1/2
/ISO/3/6/1/4/1/164/6/2/67/4/1/1/2

Named path variants

/iso/identified-organization/dod/internet/private/enterprise/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/identified-organization/dod/internet/private/enterprises/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/identified-organization/dod/internet/private/ldap-enterprise/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/identified-organization/dod/internet/private/vendor-objects/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/org/dod/internet/private/enterprise/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/org/dod/internet/private/enterprises/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/org/dod/internet/private/ldap-enterprise/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/org/dod/internet/private/vendor-objects/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/iso-identified-organization/dod/internet/private/enterprise/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/iso-identified-organization/dod/internet/private/enterprises/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/iso-identified-organization/dod/internet/private/ldap-enterprise/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/iso-identified-organization/dod/internet/private/vendor-objects/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/iso-organization/dod/internet/private/enterprise/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/iso-organization/dod/internet/private/enterprises/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/iso-organization/dod/internet/private/ldap-enterprise/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState
/iso/iso-organization/dod/internet/private/vendor-objects/rad/radGen/agnt/agnFiles/swPack/swPackTable/swPackEntry/swPackActivityState

SNMP properties

Value type: INTEGER
Maximum access defined by MIB: read-only
Status in MIB: current

Enumerated values

Value	Name
1	active
2	ready
3	previousActive

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: fileSystemPath, fileSystemObjType, fileSystemObjName.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.164.6.2.67.4.1.1.2

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Published definition

The displayed source records contain one distinct definition. Compare its source records.

swPackActivityState OBJECT-TYPE
    SYNTAX    INTEGER {
        active          (1),
        ready           (2),
        previousActive  (3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "SW Pack activity states are:
            active (1) - is set upon SW Pack installation starting
                process.
                Only one SW Pack may be 'active' at any given time.
                When a SW Pack becomes 'active' agent sets 'readOnly'
                bit of the fileSystemEntry.fileSystemValidIndication
                object.
                In addition the agent shall mark the previous active SW
                Pack to 'previousActive' (see below description of
                'previousActive (3)').
            ready (2) - means that the SW Pack was loaded successfully
                and it is ready to be installed. The 'readOnly' bit of
                the fileSystemEntry.fileSystemValidIndication object
                shall be reset.
            previousActive (3)- This is a transitional status that
                remains during the installation process. After the
                completion of the installation the Agent changes it to
                'ready'. In case of SW Pack installation interruption by
                the 'undoInstall' command the agent shall change the
                'previousActive' state to 'active'.
                Note: Only one previousActive SW Pack may exist at any
                given time."
    ::= { swPackEntry 2 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

SW Pack activity states are: active (1) - is set upon SW Pack installation starting process. Only one SW Pack may be 'active' at any given time. When a SW Pack becomes 'active' agent sets 'readOnly' bit of the fileSystemEntry.fileSystemValidIndication object. In addition the agent shall mark the previous active SW Pack to 'previousActive' (see below description of 'previousActive (3)'). ready (2) - means that the SW Pack was loaded successfully and it is ready to be installed. The 'readOnly' bit of the fileSystemEntry.fileSystemValidIndication object shall be reset. previousActive (3)- This is a transitional status that remains during the installation process. After the completion of the installation the Agent changes it to 'ready'. In case of SW Pack installation interruption by the 'undoInstall' command the agent shall change the 'previousActive' state to 'active'. Note: Only one previousActive SW Pack may exist at any given time.

Sources for this description

RAD MIB copies (Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1RAD MIB copies (Observium Community)1 record · 1 source

Description 1

swPackActivityState · currentRAD MIB copies (Observium Community)1 source

Status in source: current.

Names: swPackActivityState

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swPackActivityState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "active",
    "(",
    "1",
    ")",
    ",",
    "ready",
    "(",
    "2",
    ")",
    ",",
    "previousActive",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"SW Pack activity states are: active (1) - is set upon SW Pack installation starting process. Only one SW Pack may be 'active' at any given time. When a SW Pack becomes 'active' agent sets 'readOnly' bit of the fileSystemEntry.fileSystemValidIndication object. In addition the agent shall mark the previous active SW Pack to 'previousActive' (see below description of 'previousActive (3)'). ready (2) - means that the SW Pack was loaded successfully and it is ready to be installed. The 'readOnly' bit of the fileSystemEntry.fileSystemValidIndication object shall be reset. previousActive (3)- This is a transitional status that remains during the installation process. After the completion of the installation the Agent changes it to 'ready'. In case of SW Pack installation interruption by the 'undoInstall' command the agent shall change the 'previousActive' state to 'active'. Note: Only one previousActive SW Pack may exist at any given time.\"",
    "::=",
    "{",
    "swPackEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "active",
            1
          ],
          [
            "ready",
            2
          ],
          [
            "previousActive",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "SW Pack activity states are: active (1) - is set upon SW Pack installation starting process. Only one SW Pack may be 'active' at any given time. When a SW Pack becomes 'active' agent sets 'readOnly' bit of the fileSystemEntry.fileSystemValidIndication object. In addition the agent shall mark the previous active SW Pack to 'previousActive' (see below description of 'previousActive (3)'). ready (2) - means that the SW Pack was loaded successfully and it is ready to be installed. The 'readOnly' bit of the fileSystemEntry.fileSystemValidIndication object shall be reset. previousActive (3)- This is a transitional status that remains during the installation process. After the completion of the installation the Agent changes it to 'ready'. In case of SW Pack installation interruption by the 'undoInstall' command the agent shall change the 'previousActive' state to 'active'. Note: Only one previousActive SW Pack may exist at any given time."
    ],
    null,
    null,
    null,
    null
  ]
}

RAD MIB copies (Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

Vendor MIB copy from the Observium Community archive. RAD support.

Module: RAD-SwPack-MIB

See published definition above

Module imports

{'RAD-TC': ['FileType', 'SlotType'], 'SNMPv2-TC': ['DateAndTime'], 'SNMPv2-MIB': ['sysName'], 'SNMPv2-SMI': ['Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE'], 'RAD-GEN-MIB': ['agnFiles', 'alarmEventLogSourceName', 'alarmEventLogAlarmOrEventId', 'alarmEventLogDescription', 'alarmEventLogSeverity', 'alarmEventLogDateAndTime', 'alarmEventReason', 'systemsEvents', 'fileSystemPath', 'fileSystemObjType', 'fileSystemObjName', 'fileSystemValidIndication'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

· Download RAD-SwPack-MIB

Related source files and packages:

Observium Community original distribution archive

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.164)

Brighitte Shalom

Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.164)

Smadar Tauber

Siblings (3)

OID	Name	Direct children	Descendants	Description
1.3.6.1.4.1.164.6.2.67.4.1.1.1	swPackVersion	0	0
1.3.6.1.4.1.164.6.2.67.4.1.1.3	swPackCreateTime	0	0
1.3.6.1.4.1.164.6.2.67.4.1.1.4	swPackNumberOfFiles	0	0