OID reference
1.3.6.1.4.1.164.6.3.1.1.1.8
The minimum absolute rate, in kbps, that should be allocated to this queue. If the value is zero, then there is effectively no minimum rate guarantee. If the value is non-zero, then the servicing of this queue in at least this rate is assured. Note that when this attribute is being used, the wfqWeightValue attribute i…
Identification
{1 3 6 1 4 1 164 6 3 1 1 1 8}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In RAD-MIB, the row index consists of these components in order:
wfqCnfgIdx (Integer32): one numeric subidentifier for the non-negative value.wfqPrtIdx (Integer32): one numeric subidentifier for the non-negative value.wfqTblIdx (Integer32): one numeric subidentifier for the non-negative value.wfqQueueIdx (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.164.6.3.1.1.1.8.<wfqCnfgIdx>.<wfqPrtIdx>.<wfqTblIdx>.<wfqQueueIdx>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.164.6.3.1.1.1.8
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
wfqMinRateAbsolute OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum absolute rate, in kbps,
that should be allocated to this queue.
If the value is zero, then there is effectively
no minimum rate guarantee.
If the value is non-zero, then the servicing of
this queue in at least this rate is assured.
Note that when this attribute is being used, the wfqWeightValue attribute is NA."
::= { wfqEntry 8 }wfqMinRateAbsolute OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Kbps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum absolute rate, in kbps,
that should be allocated to this queue.
If the value is zero, then there is effectively
no minimum rate guarantee.
If the value is non-zero, then the servicing of
this queue in at least this rate is assured.
Note that when this attribute is being used, the wfqWeightValue attribute is NA."
::= { wfqEntry 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The minimum absolute rate, in kbps, that should be allocated to this queue. If the value is zero, then there is effectively no minimum rate guarantee. If the value is non-zero, then the servicing of this queue in at least this rate is assured. Note that when this attribute is being used, the wfqWeightValue attribute is NA.
Netdisco MIB archive copiesRAD MIB copies (Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: wfqMinRateAbsolute
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"wfqMinRateAbsolute",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"UNITS",
[
"literal",
"224b62707322"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The minimum absolute rate, in kbps, that should be allocated to this queue. If the value is zero, then there is effectively no minimum rate guarantee. If the value is non-zero, then the servicing of this queue in at least this rate is assured. Note that when this attribute is being used, the wfqWeightValue attribute is NA.\"",
"::=",
"{",
"wfqEntry",
"8",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32"
],
[
"UNITS",
"Kbps"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The minimum absolute rate, in kbps, that should be allocated to this queue. If the value is zero, then there is effectively no minimum rate guarantee. If the value is non-zero, then the servicing of this queue in at least this rate is assured. Note that when this attribute is being used, the wfqWeightValue attribute is NA."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'InterfaceIndexOrZero', 'ifDescr'], 'APS-MIB': ['apsConfigEntry'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'aal5VccVpi', 'aal5VccVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry', 'atmVclEntry', 'aal5VccEntry'], 'DS1-MIB': ['dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1CurrentIndex', 'dsx1LineIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LoopbackStatus', 'dsx1TotalIndex'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3ConfigEntry', 'dsx3LoopbackStatus'], 'IMA-MIB': ['imaGroupIndex', 'imaLinkIfIndex', 'imaGroupFailureStatus'], 'MAU-MIB': ['rpMauMediaAvailable'], 'ATMF-CES': ['atmfCESCbrIndex', 'atmfCESConfEntry'], 'IPOA-MIB': ['ipoaLisIfMappingEntry'], 'ISDN-MIB': ['isdnSignalingEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['TimeStamp', 'TAddress', 'TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'DateAndTime', 'TruthValue', 'RowPointer'], 'ATM-TC-MIB': ['AtmTrafficDescrParamIndex'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'TimeTicks', 'enterprises', 'IpAddress', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RFC1381-MIB': ['IfIndexType'], 'DIFFSERV-MIB': ['IndexIntegerNextFree', 'IndexInteger'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qVlanStaticEntry'], 'DS0BUNDLE-MIB': ['dsx0BundleEntry'], 'FRNETSERV-MIB': ['frPVCEndptDLCIIndex'], 'FDDI-SMT73-MIB': ['fddimibPORTPCMState'], 'IANAifType-MIB': ['IANAifType'], 'MPLS-TC-STD-MIB': ['MplsLabel', 'MplsTunnelIndex', 'MplsOwner', 'MplsLdpIdentifier', 'MplsLsrIdentifier'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-REPEATER-MIB': ['rptrGroupOperStatus', 'rptrPortOperStatus'], 'MULTI-MEDIA-MIB-TC': ['MmTAddressTag', 'MmEndpointID', 'MmAliasAddress', 'MmH323EndpointType', 'MmGatekeeperID', 'MmAliasTag'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry'], 'HDSL2-SHDSL-LINE-MIB': ['hdsl2ShdslEndpointCurrEntry', 'hdsl2ShdslInvIndex', 'hdsl2ShdslEndpointSide', 'hdsl2ShdslSpanConfProfileEntry'], 'FR-ATM-PVC-SERVICE-IWF-MIB': ['frAtmIwfConnectionEntry']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-Services-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'IpAddress', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'Counter64'], 'RAD-SMI-MIB': ['radGen'], 'Q-BRIDGE-MIB': ['VlanIdOrNone', 'VlanIdOrAnyOrNone'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetAddressPrefixLength'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Vendor MIB copy from the Netdisco archive.
Module: RAD-MIB
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'ifDescr'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry'], 'DS1-MIB': ['dsx1CurrentIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LineIndex', 'dsx1TotalIndex', 'dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1LoopbackStatus'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3LoopbackStatus', 'dsx3ConfigEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['RowStatus', 'DateAndTime', 'TimeStamp', 'TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress', 'RowPointer', 'TruthValue'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['TimeTicks', 'enterprises', 'IpAddress', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Unsigned32', 'Counter64'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanId', 'PortList', 'dot1qVlanStaticEntry'], 'IANAifType-MIB': ['IANAifType'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.6.3.1.1.1.1 | wfqCnfgIdx | 0 | 0 | This object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant, Set is done only t… |
| 1.3.6.1.4.1.164.6.3.1.1.1.2 | wfqPrtIdx | 0 | 0 | This object indicates a unique port or interface number, for which Weighted Fair Queueing table is applicable . For numbering, se… |
| 1.3.6.1.4.1.164.6.3.1.1.1.3 | wfqTblIdx | 0 | 0 | This object indicates which Weighted Fair Queueing (WFQ) Table is being used. There can be several tables. For FCD-155 User will… |
| 1.3.6.1.4.1.164.6.3.1.1.1.4 | wfqQueueIdx | 0 | 0 | This object indicates a queue index. For FCD-155, valid queues are 1..3. The 4th queue is not in MIB. Its weight will be RO, Calcu… |
| 1.3.6.1.4.1.164.6.3.1.1.1.5 | wfqRowStatus | 0 | 0 | This object enables Creation/Deletion of rows in the WFQ table. For FCD-155, rows are not created nor destroyed by user. |
| 1.3.6.1.4.1.164.6.3.1.1.1.6 | wfqWeightValue | 0 | 0 | This object indicates a relative weight value. User should make sure that the sum of values for all queues will not exceed 100% (s… |
| 1.3.6.1.4.1.164.6.3.1.1.1.7 | wfqSchedulingMode | 0 | 0 | |
| 1.3.6.1.4.1.164.6.3.1.1.1.9 | wfqMaxPacketSize | 0 | 0 |