OID reference
1.3.6.1.4.1.171.10.120.100.2.2.1.4
The value is used for HelloTime when this bridge is acting in RSTP or STP mode, in units of hundredths of a second. You can only read/write this value in RSTP or STP mode.
Identification
{1 3 6 1 4 1 171 10 120 100 2 2 1 4}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.171.10.120.100.2.2.1.4.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
swMSTPStpHelloTime OBJECT-TYPE
SYNTAX INTEGER (100..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value is used for HelloTime when
this bridge is acting in RSTP or STP mode,
in units of hundredths of a second.
You can only read/write this value in RSTP or STP mode."
::= { swMSTPGblMgmt 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The value is used for HelloTime when this bridge is acting in RSTP or STP mode, in units of hundredths of a second. You can only read/write this value in RSTP or STP mode.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swMSTPStpHelloTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swMSTPStpHelloTime",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"100",
".",
".",
"1000",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The value is used for HelloTime when this bridge is acting in RSTP or STP mode, in units of hundredths of a second. You can only read/write this value in RSTP or STP mode.\"",
"::=",
"{",
"swMSTPGblMgmt",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
100,
1000
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value is used for HelloTime when this bridge is acting in RSTP or STP mode, in units of hundredths of a second. You can only read/write this value in RSTP or STP mode."
],
null,
null,
null,
null
]
}Module: DGS-6600-STP-EXT-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'TimeTicks'], 'RFC1155-SMI': ['Counter'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'DGS-6600-ID-MIB': ['dgs6600-l2']}Related source files and packages:
Same file in DGS-6600_MIB_4.10.009.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DGS-6600-STP-EXT-MIB
{'SNMPv2-TC': ['RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'TimeTicks'], 'RFC1155-SMI': ['Counter'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'DGS-6600-ID-MIB': ['dgs6600-l2']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.120.100.2.2.1.1 | swMSTPStpAdminState | 0 | 0 | |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.2 | swMSTPStpVersion | 0 | 0 | |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.3 | swMSTPStpMaxAge | 0 | 0 | |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.5 | swMSTPStpForwardDelay | 0 | 0 | |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.6 | swMSTPStpMaxHops | 0 | 0 | |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.7 | swMSTPStpTxHoldCount | 0 | 0 | |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.8 | swMSTPStpForwardBPDU | 0 | 0 | |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.9 | swMSTPStpLBD | 0 | 0 | |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.10 | swMSTPStpLBDRecoverTime | 0 | 0 | |
| 1.3.6.1.4.1.171.10.120.100.2.2.1.11 | swMSTPNniBPDUAddress | 0 | 0 |