Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swLedInfoFrontPanelLedStatus",
"OBJECT-TYPE",
"SYNTAX",
"OCTET",
"STRING",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is a set of system LED indicators. The first 32 octets are defined as next, and following octets are for logical port LED. Octet 1 is Power1 LED: 0x01 = Power On. 0x02 = Power supply failures, over voltage, over current, over temperature. 0x03 = Power present, but AC does not work. 0x04 = Power and fan are running on different air flow. 0x05 = Power Off. Octet 2 is Power2 LED: 0x01 = Power On. 0x02 = Power supply failures, over voltage, over current, over temperature. 0x03 = Power present, but AC does not work. 0x04 = Power and fan are running on different air flow. 0x05 = Power Off. Octet 3 is FAN1 LED: 0x01 = All diagnostics pass. The module is operational.. 0x02 = The module is booting or running diagnostics. 0x03 = If the module fails during initial reset, the LED continues to blink and the module does not come online. The module has runtime failure and is brought offline 0x04 = The module is not receiving power Octet 4 is FAN2 LED: same with Octet 3 Octet 5 is FAN3 LED: same with Octet 3 Octet 6 is Console LED: 0x01 = Power On. 0x02 = Power Off. Octet 7 is MGMT LED: 0x01 = Link present but not sending or receiving data 0x02 = Activity. Port is sending or receiving data. 0x03 = Link fault. Error frames can affect connectivity, and errors such as excessive collisions, CRC1 errors, and alignment and jabber errors2 are monitored for a link-fault indication. 0x04 = No link, or port was administratively shutdown. Octet 8 is SDCard LED: 0x01 = Plug-in 0x02 = Read/Write 0x03 = Read/Write failed 0x04 = No link Octet 9 is MGMT port LED: bit 7: 0B = port is not activity. 1B = port is activity. bit 6~4: reserved(it will be set to zero). bit 3: 0B = half duplex 1B = full duplex bit 2~0: 0x0 = link fail 0x1 = 10Mbps 0x2 = 100Mbps 0x3 = 1000Mbps The continued octets are the logic port led. Each octet presents one port. For each octet: link/activity/speed mode: bit 7: 0B = port is not activity. 1B = port is activity. bit 6: 0B = not combo port 1B = combo port bit 5: 0B = fiber linkup 1B = copper linkup (Note: This bit is available only when the port is combo port and linkup, otherwise, this bit will be set to zero.) bit 4: reserved(will be set to zero). bit 3: 0B = half duplex 1B = full duplex bit 2~0: 0x0 = link fail 0x1 = 10Mbps 0x2 = 100Mbps 0x3 = 1000Mbps 0x4 = 10Gbps 0x5 = 40Gbps Last octet is OpenSlot Module Power LED: 0x01 = Power On. 0x05 = Power Off. \"",
"::=",
"{",
"swLedInfoEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OCTET STRING"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is a set of system LED indicators. The first 32 octets are defined as next, and following octets are for logical port LED. Octet 1 is Power1 LED: 0x01 = Power On. 0x02 = Power supply failures, over voltage, over current, over temperature. 0x03 = Power present, but AC does not work. 0x04 = Power and fan are running on different air flow. 0x05 = Power Off. Octet 2 is Power2 LED: 0x01 = Power On. 0x02 = Power supply failures, over voltage, over current, over temperature. 0x03 = Power present, but AC does not work. 0x04 = Power and fan are running on different air flow. 0x05 = Power Off. Octet 3 is FAN1 LED: 0x01 = All diagnostics pass. The module is operational.. 0x02 = The module is booting or running diagnostics. 0x03 = If the module fails during initial reset, the LED continues to blink and the module does not come online. The module has runtime failure and is brought offline 0x04 = The module is not receiving power Octet 4 is FAN2 LED: same with Octet 3 Octet 5 is FAN3 LED: same with Octet 3 Octet 6 is Console LED: 0x01 = Power On. 0x02 = Power Off. Octet 7 is MGMT LED: 0x01 = Link present but not sending or receiving data 0x02 = Activity. Port is sending or receiving data. 0x03 = Link fault. Error frames can affect connectivity, and errors such as excessive collisions, CRC1 errors, and alignment and jabber errors2 are monitored for a link-fault indication. 0x04 = No link, or port was administratively shutdown. Octet 8 is SDCard LED: 0x01 = Plug-in 0x02 = Read/Write 0x03 = Read/Write failed 0x04 = No link Octet 9 is MGMT port LED: bit 7: 0B = port is not activity. 1B = port is activity. bit 6~4: reserved(it will be set to zero). bit 3: 0B = half duplex 1B = full duplex bit 2~0: 0x0 = link fail 0x1 = 10Mbps 0x2 = 100Mbps 0x3 = 1000Mbps The continued octets are the logic port led. Each octet presents one port. For each octet: link/activity/speed mode: bit 7: 0B = port is not activity. 1B = port is activity. bit 6: 0B = not combo port 1B = combo port bit 5: 0B = fiber linkup 1B = copper linkup (Note: This bit is available only when the port is combo port and linkup, otherwise, this bit will be set to zero.) bit 4: reserved(will be set to zero). bit 3: 0B = half duplex 1B = full duplex bit 2~0: 0x0 = link fail 0x1 = 10Mbps 0x2 = 100Mbps 0x3 = 1000Mbps 0x4 = 10Gbps 0x5 = 40Gbps Last octet is OpenSlot Module Power LED: 0x01 = Power On. 0x05 = Power Off."
],
null,
null,
null,
null
]
}