Description 1
Enables / disables Non IP Filter Only State
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.15
Enables / disables Non IP Filter Only State
Identification
{1 3 6 1 4 1 171 10 134 1 1 15 2 1 1 15}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enable | 1 |
| 2 | disable | 1 |
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
aclL2RuleNonIPFilterOnlyState OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables / disables Non IP Filter Only State"
::= { aclL2RuleEntry 15 }aclL2RuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'."
::= { aclL2RuleEntry 15 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Enables / disables Non IP Filter Only State
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
Evidence
Matching descriptions are grouped; representative source files are shown for each definition.
Status in source: current.
Names: aclL2RuleNonIPFilterOnlyState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aclL2RuleNonIPFilterOnlyState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enables / disables Non IP Filter Only State\"",
"::=",
"{",
"aclL2RuleEntry",
"15",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enables / disables Non IP Filter Only State"
],
null,
null,
null,
null
]
}Module: DGS-1100-06ME-AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DGS-1100-06ME-AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Status in source: current.
Names: aclL2RuleStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aclL2RuleStatus",
"OBJECT-TYPE",
"SYNTAX",
"RowStatus",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.\"",
"::=",
"{",
"aclL2RuleEntry",
"15",
"}"
],
"syntax_tree": [
[
"row",
"RowStatus"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'."
],
null,
null,
null,
null
]
}Module: DGS-1100-06ME_A1
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.1 | aclL2AccessID | 0 | 0 | |
| 1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.2 | aclL2ProfileID | 0 | 0 | |
| 1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.3 | aclL2RuleEtherType | 0 | 0 | |
| 1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.4 | aclL2RuleDstMacAddr | 0 | 0 | |
| 1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.5 | aclL2RuleSrcMacAddr | 0 | 0 | |
| 1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.6 | aclL2RuleVlanId | 0 | 0 | |
| 1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.7 | aclL2Rule1pPriority | 0 | 0 | |
| 1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.8 | aclL2RuleDstMacAddrMask | 0 | 0 | |
| 1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.9 | aclL2RuleSrcMacAddrMask | 0 | 0 | |
| 1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.10 | aclL2RuleInPortList | 0 | 0 | |
| 1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.11 | aclL2RuleAction | 0 | 0 | |
| 1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.12 | aclL2RuleRateLimit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.13 | aclL2RuleReplaceDSCP | 0 | 0 | |
| 1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.99 | aclL2RuleStatus | 0 | 0 |