OID reference
1.3.6.1.4.1.171.10.75.2.22.1.4
This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, a 'RouterPortPurgeTimer' runs for 'RouterPortPurgeInterval'. This timer will be restarted whenever a router control message is received over that port. If no router control mssages are received for 'Ro…
Identification
{1 3 6 1 4 1 171 10 75 2 22 1 4}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.171.10.75.2.22.1.4.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
igsRouterPortPurgeInterval OBJECT-TYPE
SYNTAX INTEGER (60..600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the interval (in seconds) after which a learnt
router port entry will be purged.
For each router port learnt, a 'RouterPortPurgeTimer' runs for
'RouterPortPurgeInterval'.
This timer will be restarted whenever a router control message is
received over that port. If no router control mssages are received
for 'RouterPortPurgeInterval' time, the learnt router port entry
will be purged."
DEFVAL { 125 }
::= { igsSystem 4 }igsRouterPortPurgeInterval OBJECT-TYPE
SYNTAX INTEGER (60..600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the interval (in seconds) after which a learnt
router port entry will be purged.
For each router port learnt, a 'RouterPortPurgeTimer' runs for
'RouterPortPurgeInterval'.
This timer will be restarted whenever a router control message is
received over that port. If no router control mssages are received
for 'RouterPortPurgeInterval' time, the learnt router port entry
will be purged."
DEFVAL { 260 }
::= { igsSystem 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, a 'RouterPortPurgeTimer' runs for 'RouterPortPurgeInterval'. This timer will be restarted whenever a router control message is received over that port. If no router control mssages are received for 'RouterPortPurgeInterval' time, the learnt router port entry will be purged.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: igsRouterPortPurgeInterval
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"igsRouterPortPurgeInterval",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"60",
".",
".",
"600",
")",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, a 'RouterPortPurgeTimer' runs for 'RouterPortPurgeInterval'. This timer will be restarted whenever a router control message is received over that port. If no router control mssages are received for 'RouterPortPurgeInterval' time, the learnt router port entry will be purged.\"",
"DEFVAL",
"{",
"125",
"}",
"::=",
"{",
"igsSystem",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
60,
600
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, a 'RouterPortPurgeTimer' runs for 'RouterPortPurgeInterval'. This timer will be restarted whenever a router control message is received over that port. If no router control mssages are received for 'RouterPortPurgeInterval' time, the learnt router port entry will be purged."
],
null,
null,
null,
[
"DEFVAL",
125
]
]
}Module: DES-1228-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'SNMPv2-SMI': ['Unsigned32'], 'RFC1155-SMI': ['enterprises', 'Counter', 'TimeTicks', 'IpAddress'], 'RFC1213-MIB': ['mib-2', 'DisplayString', 'PhysAddress']}Status in source: mandatory.
Names: igsRouterPortPurgeInterval
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"igsRouterPortPurgeInterval",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"60",
".",
".",
"600",
")",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, a 'RouterPortPurgeTimer' runs for 'RouterPortPurgeInterval'. This timer will be restarted whenever a router control message is received over that port. If no router control mssages are received for 'RouterPortPurgeInterval' time, the learnt router port entry will be purged.\"",
"DEFVAL",
"{",
"260",
"}",
"::=",
"{",
"igsSystem",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
60,
600
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, a 'RouterPortPurgeTimer' runs for 'RouterPortPurgeInterval'. This timer will be restarted whenever a router control message is received over that port. If no router control mssages are received for 'RouterPortPurgeInterval' time, the learnt router port entry will be purged."
],
null,
null,
null,
[
"DEFVAL",
260
]
]
}Module: DES-1228-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'SNMPv2-SMI': ['Unsigned32'], 'RFC1155-SMI': ['enterprises', 'Counter', 'TimeTicks', 'IpAddress'], 'RFC1213-MIB': ['mib-2', 'DisplayString', 'PhysAddress']}Module: DES-1228-MIB
{'RFC-1212': ['OBJECT-TYPE'], 'SNMPv2-SMI': ['Unsigned32'], 'RFC1155-SMI': ['enterprises', 'Counter', 'TimeTicks', 'IpAddress'], 'RFC1213-MIB': ['mib-2', 'DisplayString', 'PhysAddress']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES-1228-MIB
{'RFC-1212': ['OBJECT-TYPE'], 'SNMPv2-SMI': ['Unsigned32'], 'RFC1155-SMI': ['enterprises', 'Counter', 'TimeTicks', 'IpAddress'], 'RFC1213-MIB': ['mib-2', 'DisplayString', 'PhysAddress']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.75.2.22.1.2 | igsStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.2.22.1.3 | igsv3Processing | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.2.22.1.5 | igsHostPortPurgeInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.2.22.1.6 | igsReportForwardInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.2.22.1.7 | igsLeaveProcessInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.2.22.1.8 | igsMcastEntryAgeingInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.2.22.1.9 | igsSharedSegmentAggregationInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.2.22.1.10 | igsGblReportFwdOnAllPorts | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.2.22.1.13 | igsNextMcastFwdMode | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.2.22.1.14 | igsQueryInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.2.22.1.15 | igsQueryMaxResponseTime | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.2.22.1.16 | igsRobustnessValue | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.2.22.1.17 | igsLastMembQueryInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.2.22.1.18 | igsQuerierStateOnOff | 0 | 0 |