Description 1
The port's operating speed state.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.10.75.5.1.13.1.4
The port's operating speed state.
Identification
{1 3 6 1 4 1 171 10 75 5 1 13 1 4}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | auto | 2 |
| 1 | down | 1 |
| 2 | mdi | 2 |
| 2 | rate1000M-Full | 1 |
| 3 | mdix | 2 |
| 3 | rate100M-Full | 1 |
| 4 | rate100M-Half | 1 |
| 5 | rate10M-Full | 1 |
| 6 | rate10M-Half | 1 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DES-1210-28_AX, the row index sysPortCtrlIndex is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.10.75.5.1.13.1.4.<sysPortCtrlIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index variants: sysPortCtrlIndex; sysPortCtrlIndex, sysPortCtrlMediumType.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.75.5.1.13.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
sysPortCtrlOperStatus OBJECT-TYPE
SYNTAX INTEGER {
down (1),
rate1000M-Full (2),
rate100M-Full (3),
rate100M-Half (4),
rate10M-Full (5),
rate10M-Half (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's operating speed state."
::= { sysPortCtrlEntry 4 }sysPortCtrlMDI OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
mdi (2),
mdix (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface auto/mdi/mdix mode.
The default setting is Auto."
::= { sysPortCtrlEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The port's operating speed state.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
Configures interface auto/mdi/mdix mode. The default setting is Auto.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: sysPortCtrlOperStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sysPortCtrlOperStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"down",
"(",
"1",
")",
",",
"rate1000M-Full",
"(",
"2",
")",
",",
"rate100M-Full",
"(",
"3",
")",
",",
"rate100M-Half",
"(",
"4",
")",
",",
"rate10M-Full",
"(",
"5",
")",
",",
"rate10M-Half",
"(",
"6",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The port's operating speed state.\"",
"::=",
"{",
"sysPortCtrlEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"down",
1
],
[
"rate1000M-Full",
2
],
[
"rate100M-Full",
3
],
[
"rate100M-Half",
4
],
[
"rate10M-Full",
5
],
[
"rate10M-Half",
6
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The port's operating speed state."
],
null,
null,
null,
null
]
}Module: DES-1210-28_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES-1210-28_AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Related source files and packages:
Status in source: current.
Names: sysPortCtrlMDI
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sysPortCtrlMDI",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"auto",
"(",
"1",
")",
",",
"mdi",
"(",
"2",
")",
",",
"mdix",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Configures interface auto/mdi/mdix mode. The default setting is Auto.\"",
"::=",
"{",
"sysPortCtrlEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"auto",
1
],
[
"mdi",
2
],
[
"mdix",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Configures interface auto/mdi/mdix mode. The default setting is Auto."
],
null,
null,
null,
null
]
}Module: DES-1210-28_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES-1210-28-AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Netdisco archive.
Module: DES-1210-28-AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.75.5.1.13.1.1 | sysPortCtrlIndex | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.1.13.1.2 | sysPortCtrlSpeed, sysPortCtrlMediumType | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.1.13.1.3 | sysPortCtrlOperStatus, sysPortCtrlSpeed | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.1.13.1.5 | sysPortCtrlFlowControl, sysPortCtrlMDI | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.1.13.1.6 | sysPortCtrlFlowControlOper, sysPortCtrlFlowControl | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.1.13.1.7 | sysPortCtrlType, sysPortCtrlFlowControlOper | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.1.13.1.8 | sysPortCtrlType | 0 | 0 |