OID reference
1.3.6.1.4.1.171.10.76.16.6.2.1.3
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see stpPortEnable), this objec…
Identification
{1 3 6 1 4 1 171 10 76 16 6 2 1 3}
| Value | Name |
|---|---|
| 1 | disabled |
| 2 | blocking |
| 3 | listening |
| 4 | learning |
| 5 | forwarding |
| 6 | broken |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DGS-1210-28P_BX, the row index stpPort is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.10.76.16.6.2.1.3.<stpPort>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.76.16.6.2.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
stpPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see stpPortEnable), this object
will have a value of disabled(1)."
REFERENCE
"IEEE 802.1D-2004"
::= { stpPortEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see stpPortEnable), this object will have a value of disabled(1).
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: stpPortState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"stpPortState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disabled",
"(",
"1",
")",
",",
"blocking",
"(",
"2",
")",
",",
"listening",
"(",
"3",
")",
",",
"learning",
"(",
"4",
")",
",",
"forwarding",
"(",
"5",
")",
",",
"broken",
"(",
"6",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see stpPortEnable), this object will have a value of disabled(1).\"",
"REFERENCE",
"\"IEEE 802.1D-2004\"",
"::=",
"{",
"stpPortEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disabled",
1
],
[
"blocking",
2
],
[
"listening",
3
],
[
"learning",
4
],
[
"forwarding",
5
],
[
"broken",
6
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see stpPortEnable), this object will have a value of disabled(1)."
],
[
"REFERENCE",
"IEEE 802.1D-2004"
],
null,
null,
null
]
}Module: DGS-1210-28P_BX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Related source files and packages:
Same file in DGS-1210-28P-BX-3-10-008.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DGS-1210-28P_BX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.76.16.6.2.1.1 | stpPort | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.2 | stpPortPriority | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.4 | stpPortEnable | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.5 | stpAdminPortPathCost | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.6 | stpPortPathCost | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.7 | stpPortDesignatedRoot | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.8 | stpPortDesignatedCost | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.9 | stpPortDesignatedBridge | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.10 | stpPortDesignatedPort | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.11 | stpPortForwardTransitions | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.12 | stpPortProtocolMigration | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.13 | stpPortOperEdgePort | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.14 | stpPortAdminPointToPoint | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.15 | stpPortOperPointToPoint | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.16 | stpPortEdge | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.17 | stpPortRestrictedRole | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.16.6.2.1.18 | stpPortRestrictedTCN | 0 | 0 |