OID reference
1.3.6.1.4.1.171.10.76.2.11.6.1.6
For ingress untagged packets, the per port 'Default Priority' setting will be applied to packets of each port to provide port-based traffic prioritization. For ingress tagged packets, D-Link Smart Switches will refer to their 802.1p information and prioritize them with 4 different priority queues.
Identification
{1 3 6 1 4 1 171 10 76 2 11 6 1 6}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 0 | qlevel0 | 2 |
| 1 | low | 1 |
| 1 | qlevel1 | 2 |
| 2 | middle | 1 |
| 2 | qlevel2 | 2 |
| 3 | high | 1 |
| 3 | qlevel3 | 2 |
| 4 | highest | 1 |
| 4 | qlevel4 | 2 |
| 5 | qlevel5 | 2 |
| 6 | qlevel6 | 2 |
| 7 | qlevel7 | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DGS-1224T-MIB, the row index configPort is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.10.76.2.11.6.1.6.<configPort>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.76.2.11.6.1.6
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
configPortPriority OBJECT-TYPE
SYNTAX INTEGER {
low(1),
middle(2),
high(3),
highest(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For ingress untagged packets, the per port 'Default Priority'
setting will be applied to packets of each port to provide
port-based traffic prioritization.
For ingress tagged packets, D-Link Smart Switches will refer
to their 802.1p information and prioritize them with 4
different priority queues. "
::= { configPortEntry 6 }configPortPriority OBJECT-TYPE
SYNTAX INTEGER {
qlevel0(0),
qlevel1(1),
qlevel2(2),
qlevel3(3),
qlevel4(4),
qlevel5(5),
qlevel6(6),
qlevel7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port's current priority."
::= { configPortEntry 6 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
For ingress untagged packets, the per port 'Default Priority' setting will be applied to packets of each port to provide port-based traffic prioritization. For ingress tagged packets, D-Link Smart Switches will refer to their 802.1p information and prioritize them with 4 different priority queues.
Description 2
The port's current priority.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: configPortPriority
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"configPortPriority",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"low",
"(",
"1",
")",
",",
"middle",
"(",
"2",
")",
",",
"high",
"(",
"3",
")",
",",
"highest",
"(",
"4",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"For ingress untagged packets, the per port 'Default Priority' setting will be applied to packets of each port to provide port-based traffic prioritization. For ingress tagged packets, D-Link Smart Switches will refer to their 802.1p information and prioritize them with 4 different priority queues. \"",
"::=",
"{",
"configPortEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"low",
1
],
[
"middle",
2
],
[
"high",
3
],
[
"highest",
4
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"For ingress untagged packets, the per port 'Default Priority' setting will be applied to packets of each port to provide port-based traffic prioritization. For ingress tagged packets, D-Link Smart Switches will refer to their 802.1p information and prioritize them with 4 different priority queues."
],
null,
null,
null,
null
]
}Module: DGS-1224T-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['enterprises', 'Counter', 'TimeTicks', 'IpAddress'], 'RFC1213-MIB': ['mib-2', 'DisplayString', 'PhysAddress']}Status in source: mandatory.
Names: configPortPriority
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"configPortPriority",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"qlevel0",
"(",
"0",
")",
",",
"qlevel1",
"(",
"1",
")",
",",
"qlevel2",
"(",
"2",
")",
",",
"qlevel3",
"(",
"3",
")",
",",
"qlevel4",
"(",
"4",
")",
",",
"qlevel5",
"(",
"5",
")",
",",
"qlevel6",
"(",
"6",
")",
",",
"qlevel7",
"(",
"7",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"The port's current priority.\"",
"::=",
"{",
"configPortEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"qlevel0",
0
],
[
"qlevel1",
1
],
[
"qlevel2",
2
],
[
"qlevel3",
3
],
[
"qlevel4",
4
],
[
"qlevel5",
5
],
[
"qlevel6",
6
],
[
"qlevel7",
7
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"The port's current priority."
],
null,
null,
null,
null
]
}Module: DGS-1224T-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['enterprises', 'Counter', 'TimeTicks', 'IpAddress'], 'RFC1213-MIB': ['mib-2', 'DisplayString', 'PhysAddress']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.76.2.11.6.1.1 | configPort | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.2.11.6.1.2 | configPortSpeed | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.2.11.6.1.3 | configPortOperStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.2.11.6.1.4 | configPortFlowControl | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.2.11.6.1.5 | configPortFlowControlOper | 0 | 0 |