Description 1
When mirroring is enabled (configMirroringMode = ingress, egress, both), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled.
OID reference
1.3.6.1.4.1.171.10.76.2.11.8.1.2
When mirroring is enabled (configMirroringMode = ingress, egress, both), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled.
Identification
{1 3 6 1 4 1 171 10 76 2 11 8 1 2}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 0 | disabled | 2 |
| 1 | rx | 2 |
| 2 | tx | 2 |
| 3 | both | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DGS-1224T-MIB, the row index configMirrorId is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.10.76.2.11.8.1.2.<configMirrorId>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.76.2.11.8.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
configMirrorMon OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When mirroring is enabled (configMirroringMode =
ingress, egress, both), this identifies the mirroring monitoring
port. This value has a valid range of 1 to ifNumber when
enabled."
::= { configMirrorEntry 2 }configMirrorMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
rx(1),
tx(2),
both(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When deciding the mirroring source port, then Mirror mode will
be available."
::= { configMirrorEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
When mirroring is enabled (configMirroringMode = ingress, egress, both), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled.
Description 2
When deciding the mirroring source port, then Mirror mode will be available.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: configMirrorMon
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"configMirrorMon",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"When mirroring is enabled (configMirroringMode = ingress, egress, both), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled.\"",
"::=",
"{",
"configMirrorEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"When mirroring is enabled (configMirroringMode = ingress, egress, both), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled."
],
null,
null,
null,
null
]
}Module: DGS-1224T-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['enterprises', 'Counter', 'TimeTicks', 'IpAddress'], 'RFC1213-MIB': ['mib-2', 'DisplayString', 'PhysAddress']}Status in source: mandatory.
Names: configMirrorMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"configMirrorMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disabled",
"(",
"0",
")",
",",
"rx",
"(",
"1",
")",
",",
"tx",
"(",
"2",
")",
",",
"both",
"(",
"3",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"When deciding the mirroring source port, then Mirror mode will be available.\"",
"::=",
"{",
"configMirrorEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disabled",
0
],
[
"rx",
1
],
[
"tx",
2
],
[
"both",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"When deciding the mirroring source port, then Mirror mode will be available."
],
null,
null,
null,
null
]
}Module: DGS-1224T-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['enterprises', 'Counter', 'TimeTicks', 'IpAddress'], 'RFC1213-MIB': ['mib-2', 'DisplayString', 'PhysAddress']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.76.2.11.8.1.1 | configMirrorId | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.2.11.8.1.3 | configMirrorTXSrc, configMirrorMon | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.2.11.8.1.4 | configMirrorRXSrc, configMirrorSrc | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.2.11.8.1.5 | configMirrorStatus | 0 | 0 |