Description 1
Enable/Disable Advertisement Status of the IEEE 802.1Q VLAN.
Sources for this description
D-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.10.76.31.1.7.6.1.5
Enable/Disable Advertisement Status of the IEEE 802.1Q VLAN.
Identification
{1 3 6 1 4 1 171 10 76 31 1 7 6 1 5}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enabled | 1 |
| 2 | disabled | 1 |
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dot1qVlanAdvertisementStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/Disable Advertisement Status of the IEEE 802.1Q VLAN."
::= { dot1qVlanEntry 5 }dot1qVlanUntaggedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which should transmit egress packets
for this VLAN as untagged. The default value of this
object for the default VLAN (dot1qVlanIndex = 1) is a string
of appropriate length including all ports. There is no
specified default for other VLANs. If a device agent cannot
support the set of ports being set then it will reject the
set operation with an error. An example might be if a
manager attempts to set more than one VLAN to be untagged
on egress where the device does not support this IEEE 802.1Q
option."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.2.1"
::= { dot1qVlanEntry 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Enable/Disable Advertisement Status of the IEEE 802.1Q VLAN.
D-Link MIB copies (LibreNMS/Observium Community)
Description 2
The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. An example might be if a manager attempts to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dot1qVlanAdvertisementStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dot1qVlanAdvertisementStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Enable/Disable Advertisement Status of the IEEE 802.1Q VLAN.\"",
"::=",
"{",
"dot1qVlanEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enable/Disable Advertisement Status of the IEEE 802.1Q VLAN."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DGS-1210-20ME_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Related source files and packages:
Status in source: current.
Names: dot1qVlanUntaggedPorts
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dot1qVlanUntaggedPorts",
"OBJECT-TYPE",
"SYNTAX",
"PortList",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. An example might be if a manager attempts to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.\"",
"REFERENCE",
"\"IEEE 802.1Q/D11 Section 12.10.2.1\"",
"::=",
"{",
"dot1qVlanEntry",
"5",
"}"
],
"syntax_tree": [
[
"row",
"PortList"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. An example might be if a manager attempts to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option."
],
[
"REFERENCE",
"IEEE 802.1Q/D11 Section 12.10.2.1"
],
null,
null,
null
]
}Module: DGS-1210-20ME-AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress', 'TimeInterval', 'TimeStamp', 'TDomain', 'TAddress', 'DisplayString', 'RowPointer'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.76.31.1.7.6.1.1 | dot1qVlanId, dot1qVlanName | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.31.1.7.6.1.2 | dot1qVlanName, dot1qVlanEgressPorts | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.31.1.7.6.1.3 | dot1qVlanEgressPorts, dot1qVlanForbiddenPorts | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.31.1.7.6.1.4 | dot1qVlanForbiddenPorts, dot1qVlanUntaggedPorts | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.31.1.7.6.1.6 | dot1qVlanAdvertisementStatus, dot1qVlanRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.31.1.7.6.1.7 | dot1qVlanRowStatus | 0 | 0 |