Description 1
This object is used for enabling or disabling LLDP in the system.
Sources for this description
D-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.10.76.32.1.32.1
This object is used for enabling or disabling LLDP in the system.
Identification
{1 3 6 1 4 1 171 10 76 32 1 32 1}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enable | 1 |
| 2 | disable | 1 |
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dlinklldpState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for enabling or disabling LLDP in the system."
DEFVAL { disable }
::= { companyLLDPSetting 1 }swTimeRangeSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwTimeRangeSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure time Range in the system."
::= { companyTimeRangeMgmt 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This object is used for enabling or disabling LLDP in the system.
D-Link MIB copies (LibreNMS/Observium Community)
Description 2
A table to configure time Range in the system.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dlinklldpState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dlinklldpState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used for enabling or disabling LLDP in the system.\"",
"DEFVAL",
"{",
"disable",
"}",
"::=",
"{",
"companyLLDPSetting",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used for enabling or disabling LLDP in the system."
],
null,
null,
null,
[
"DEFVAL",
"disable"
]
]
}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DGS-1210-10ME_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Related source files and packages:
Status in source: current.
Names: swTimeRangeSettingTable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swTimeRangeSettingTable",
"OBJECT-TYPE",
"SYNTAX",
"SEQUENCE",
"OF",
"SwTimeRangeSettingEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"A table to configure time Range in the system.\"",
"::=",
"{",
"companyTimeRangeMgmt",
"1",
"}"
],
"syntax_tree": [
[
"conceptualTable",
[
"row",
"SwTimeRangeSettingEntry"
]
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"A table to configure time Range in the system."
],
null,
null,
null,
null
]
}Module: DGS-1210-10_CX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.76.32.1.32.1.1 | swTimeRangeSettingEntry | 21 | 21 |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.76.32.1.32.2 | dlinklldpMsgHoldMultiplier | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.32.1.32.3 | dlinklldpMsgTxInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.32.1.32.4 | dlinklldpReinitDelay | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.32.1.32.5 | dlinklldpTxDelay | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.32.1.32.6 | dlinklldpConfigManAddrPortsTxEnable | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.32.1.32.11 | lldpPortConfigTable | 1 | 5 | |
| 1.3.6.1.4.1.171.10.76.32.1.32.12 | lldpXdot3Objects | 3 | 48 | |
| 1.3.6.1.4.1.171.10.76.32.1.32.13 | lldpXdot1Objects | 3 | 47 |