Description 1
The status of a row in dot1qVlanTable. By setting this object, new entries can be created in dot1qVlanTable and existing entries can be removed from dot1qVlanTable. It can be used as specified in the SNMP v2 standard.
OID reference
1.3.6.1.4.1.171.10.76.32.1.7.6.1.5
The status of a row in dot1qVlanTable. By setting this object, new entries can be created in dot1qVlanTable and existing entries can be removed from dot1qVlanTable. It can be used as specified in the SNMP v2 standard.
Identification
{1 3 6 1 4 1 171 10 76 32 1 7 6 1 5}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enabled | 2 |
| 2 | disabled | 2 |
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dot1qVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of a row in dot1qVlanTable. By setting this object, new
entries can be created in dot1qVlanTable and existing entries can be
removed from dot1qVlanTable. It can be used as specified in the SNMP
v2 standard."
::= { dot1qVlanEntry 5 }dot1qVlanAdvertisementStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/Disable Advertisement Status of the IEEE 802.1Q VLAN."
::= { dot1qVlanEntry 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The status of a row in dot1qVlanTable. By setting this object, new entries can be created in dot1qVlanTable and existing entries can be removed from dot1qVlanTable. It can be used as specified in the SNMP v2 standard.
Description 2
Enable/Disable Advertisement Status of the IEEE 802.1Q VLAN.
D-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dot1qVlanRowStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dot1qVlanRowStatus",
"OBJECT-TYPE",
"SYNTAX",
"RowStatus",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The status of a row in dot1qVlanTable. By setting this object, new entries can be created in dot1qVlanTable and existing entries can be removed from dot1qVlanTable. It can be used as specified in the SNMP v2 standard.\"",
"::=",
"{",
"dot1qVlanEntry",
"5",
"}"
],
"syntax_tree": [
[
"row",
"RowStatus"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The status of a row in dot1qVlanTable. By setting this object, new entries can be created in dot1qVlanTable and existing entries can be removed from dot1qVlanTable. It can be used as specified in the SNMP v2 standard."
],
null,
null,
null,
null
]
}Module: DGS-1210-10_CX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Status in source: current.
Names: dot1qVlanAdvertisementStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dot1qVlanAdvertisementStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Enable/Disable Advertisement Status of the IEEE 802.1Q VLAN.\"",
"::=",
"{",
"dot1qVlanEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enable/Disable Advertisement Status of the IEEE 802.1Q VLAN."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DGS-1210-10ME_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.76.32.1.7.6.1.1 | dot1qVlanName | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.32.1.7.6.1.2 | dot1qVlanEgressPorts | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.32.1.7.6.1.3 | dot1qVlanForbiddenPorts | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.32.1.7.6.1.4 | dot1qVlanUntaggedPorts | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.32.1.7.6.1.6 | dot1qVlanRowStatus | 0 | 0 |