OID reference
1.3.6.1.4.1.171.10.76.9.1.11
The Power Saving mode is capable of reducing power consumption automatically when connected devices are switched off or cable length less than 20meters. By reducing power consumption, less heat is produced, resulting in extended product life and lower operating costs. By default, the Power Saving mode is enabled.
Identification
{1 3 6 1 4 1 171 10 76 9 1 11}
| Value | Name |
|---|---|
| 1 | enable |
| 2 | disable |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.171.10.76.9.1.11.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
sysPowerSavingEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Power Saving mode is capable of reducing power consumption automatically
when connected devices are switched off or cable length less than 20meters.
By reducing power consumption, less heat is produced, resulting in
extended product life and lower operating costs. By default, the Power Saving
mode is enabled."
DEFVAL { enable }
::= { companySystem 11 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The Power Saving mode is capable of reducing power consumption automatically when connected devices are switched off or cable length less than 20meters. By reducing power consumption, less heat is produced, resulting in extended product life and lower operating costs. By default, the Power Saving mode is enabled.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: sysPowerSavingEnable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sysPowerSavingEnable",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The Power Saving mode is capable of reducing power consumption automatically when connected devices are switched off or cable length less than 20meters. By reducing power consumption, less heat is produced, resulting in extended product life and lower operating costs. By default, the Power Saving mode is enabled.\"",
"DEFVAL",
"{",
"enable",
"}",
"::=",
"{",
"companySystem",
"11",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The Power Saving mode is capable of reducing power consumption automatically when connected devices are switched off or cable length less than 20meters. By reducing power consumption, less heat is produced, resulting in extended product life and lower operating costs. By default, the Power Saving mode is enabled."
],
null,
null,
null,
[
"DEFVAL",
"enable"
]
]
}Module: DGS-1210-16_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DGS-1210-16_AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.76.9.1.1 | sysSwitchName | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.9.1.2 | sysHardwareVersion | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.9.1.3 | sysFirmwareVersion | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.9.1.4 | sysLoginTimeoutInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.9.1.5 | sysLocationName | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.9.1.6 | sysGroupInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.9.1.7 | sysSystemPassword | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.9.1.8 | sysSafeGuardEnable | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.9.1.9 | sysRestart | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.9.1.10 | sysSave | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.9.1.12 | sysJumboFrameEnable | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.9.1.13 | sysPortCtrlTable | 1 | 8 | |
| 1.3.6.1.4.1.171.10.76.9.1.14 | sysDhcpAutoConfiguration | 0 | 0 |