Status in source: current.
Names: myPtProtectedPortStatus
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"myPtProtectedPortStatus",
"OBJECT-TYPE",
"SYNTAX",
"EnabledStatus",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Some applications require that no traffic be forwarded by the Layer 2 protocol between ports on the same switch. In such an environment, there is no exchange of unicast, broadcast, or multicast traffic betweenports on the switch, and traffic between ports on the same switch is forwarded through a Layer 3 device such as a router. To meet this requirement, you can configure ports as protected ports(Set this value to enabled).Protected ports do not forward any traffic to protected ports on the same switch. This means that all traffic passing between protected ports¡ªunicast, broadcast, and multicast¡ªmust be forwarded through a Layer 3 device. Protected ports can forward any type of traffic to nonprotected ports, and they forward as usual to all ports on other switches. Dynamically learnt addresses are not retained if the switch is reloaded.\"",
"DEFVAL",
"{",
"disabled",
"}",
"::=",
"{",
"myPtTrafficCtrlEntry",
"2",
"}"
],
"syntax_tree": [
[
"row",
"EnabledStatus"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Some applications require that no traffic be forwarded by the Layer 2 protocol between ports on the same switch. In such an environment, there is no exchange of unicast, broadcast, or multicast traffic betweenports on the switch, and traffic between ports on the same switch is forwarded through a Layer 3 device such as a router. To meet this requirement, you can configure ports as protected ports(Set this value to enabled).Protected ports do not forward any traffic to protected ports on the same switch. This means that all traffic passing between protected ports¡ªunicast, broadcast, and multicast¡ªmust be forwarded through a Layer 3 device. Protected ports can forward any type of traffic to nonprotected ports, and they forward as usual to all ports on other switches. Dynamically learnt addresses are not retained if the switch is reloaded."
],
null,
null,
null,
[
"DEFVAL",
"disabled"
]
]
}
- D-Link official switch MIBs
· Publisher's source file: Source package: DES-7200_series_MIB_Firmware_v10.2.zip
Module: MY-TRAFFIC-CTRL-MIB
See published definition above
Module imports
{'MY-TC': ['ConfigStatus', 'MemberMap', 'IfIndex'], 'IF-MIB': ['ifIndex'], 'MY-SMI': ['myMgmt'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId']}
· Download MY-TRAFFIC-CTRL-MIB.mib
Related source files and packages:
- D-Link MIB copies (LibreNMS/Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive.
D-Link support.
Module: DES7200-TRAFFIC-CTRL-MIB
Same published definition
Module imports
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus', 'MacAddress'], 'DES7200-TC': ['ConfigStatus', 'MemberMap', 'IfIndex'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'IpAddress'], 'DES7200-SMI': ['myMgmt'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId']}
· Download DES7200-TRAFFIC-CTRL-MIB
Related source files and packages: