OID reference
1.3.6.1.4.1.171.10.97.2.18.2.3.1.3
Maximum bandwidth of this traffic classification in units of bps. If the Maximum bandwidth is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and myQoSPoliceMapConfMaxBandWidth must be used to set or report the Maximum bandwidth. 0 indicate that…
Identification
{1 3 6 1 4 1 171 10 97 2 18 2 3 1 3}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: myQoSPoliceCfgPoliceMapName, myQoSPoliceCfgClassMapName.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.97.2.18.2.3.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
myQoSPoliceMapConfMaxBandWidth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum bandwidth of this traffic classification in units of bps.
If the Maximum bandwidth is greater than the maximum value
reportable by this object then this object should report its
maximum value (4,294,967,295) and myQoSPoliceMapConfMaxBandWidth
must be used to set or report the Maximum bandwidth.
0 indicate that bandwidth will be not limitted."
::= { myQoSPoliceMapConfEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Maximum bandwidth of this traffic classification in units of bps. If the Maximum bandwidth is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and myQoSPoliceMapConfMaxBandWidth must be used to set or report the Maximum bandwidth. 0 indicate that bandwidth will be not limitted.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: myQoSPoliceMapConfMaxBandWidth
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"myQoSPoliceMapConfMaxBandWidth",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Maximum bandwidth of this traffic classification in units of bps. If the Maximum bandwidth is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and myQoSPoliceMapConfMaxBandWidth must be used to set or report the Maximum bandwidth. 0 indicate that bandwidth will be not limitted.\"",
"::=",
"{",
"myQoSPoliceMapConfEntry",
"3",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Maximum bandwidth of this traffic classification in units of bps. If the Maximum bandwidth is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and myQoSPoliceMapConfMaxBandWidth must be used to set or report the Maximum bandwidth. 0 indicate that bandwidth will be not limitted."
],
null,
null,
null,
null
]
}Module: MY-QOS-MIB
See published definition above
{'MY-TC': ['ConfigStatus', 'IfIndex'], 'MY-SMI': ['myMgmt'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus']}Related source files and packages:
Same file in 3610.zip.
Same file in 3610.zip.
Same file in 3610.zip.
Same file in 3610-MIB.rar.
Module: MY-QOS-MIB
{'MY-TC': ['ConfigStatus', 'IfIndex'], 'MY-SMI': ['myMgmt'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES7200-QOS-MIB
{'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus', 'MacAddress'], 'DES7200-TC': ['ConfigStatus', 'IfIndex'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'Unsigned32'], 'DES7200-SMI': ['myMgmt'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.1 | myQoSPoliceCfgPoliceMapName | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.2 | myQoSPoliceCfgClassMapName | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.4 | myQoSPoliceMapConfBurstFlowLimit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.5 | myQoSPoliceMapConfExceedAction | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.6 | myQoSPoliceMapConfExceedDscp | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.7 | myQoSPoliceMapConfNewDscp | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.8 | myQoSPoliceMapCfgEntryStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.18.2.3.1.9 | myQoSPoliceMapConfMaxHighBandWidth | 0 | 0 |