Numbers of users who attached to the system ,regardless of their state.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.10.97.2.19.1.1.12
Numbers of users who attached to the system ,regardless of their state.
Identification
{1 3 6 1 4 1 171 10 97 2 19 1 1 12}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.171.10.97.2.19.1.1.12.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
myDot1xCurrentUserNumber OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Numbers of users who attached to the system ,regardless of their state."
::= { myDot1xAuthObjects 12 }myDot1xCurrentUserNumber OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS current
DESCRIPTION
"Numbers of users who attached to the system ,regardless of their state."
::= { myDot1xAuthObjects 12 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Numbers of users who attached to the system ,regardless of their state.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: myDot1xCurrentUserNumber
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"myDot1xCurrentUserNumber",
"OBJECT-TYPE",
"SYNTAX",
"Counter",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Numbers of users who attached to the system ,regardless of their state.\"",
"::=",
"{",
"myDot1xAuthObjects",
"12",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Numbers of users who attached to the system ,regardless of their state."
],
null,
null,
null,
null
]
}Module: MY-AAA-MIB
See published definition above
{'MY-TC': ['ConfigStatus', 'IfIndex'], 'MY-SMI': ['myMgmt'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Counter'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in 3610.zip.
Same file in 3610.zip.
Same file in 3610.zip.
Same file in 3610-MIB.rar.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES7200-AAA-MIB
{'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus', 'MacAddress'], 'DES7200-TC': ['ConfigStatus', 'IfIndex'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'Unsigned32', 'IpAddress'], 'DES7200-SMI': ['myMgmt'], 'RFC1155-SMI': ['Counter'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Status in source: current.
Names: myDot1xCurrentUserNumber
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"myDot1xCurrentUserNumber",
"OBJECT-TYPE",
"SYNTAX",
"Counter",
"ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Numbers of users who attached to the system ,regardless of their state.\"",
"::=",
"{",
"myDot1xAuthObjects",
"12",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Numbers of users who attached to the system ,regardless of their state."
],
null,
null,
null,
null
]
}Module: MY-AAA-MIB
See published definition above
{'MY-TC': ['ConfigStatus', 'IfIndex'], 'MY-SMI': ['myMgmt'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId']}Related source files and packages:
Registration