OID reference
1.3.6.1.4.1.171.10.97.2.20.2.2.1.2
The acl name apply to ip address. When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). The number of sub-identifiers of this string must be 32,If length of string is less than 32 the sub-identifier(0x0) …
Identification
{1 3 6 1 4 1 171 10 97 2 20 2 2 1 2}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: myRouteMapName, myRouteMapSequenceNumber, myRouteMapMatchType, myRouteMapMatchIpAddressAclName.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.97.2.20.2.2.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
myRouteMapMatchIpAddressAclName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acl name apply to ip address.
When this string be used as an index,Value of a sub-identifier equal
ASCII value of corresponding character(first sub-identifier corresponds
first character of string). The number of sub-identifiers of this string
must be 32,If length of string is less than 32 the sub-identifier(0x0)
will be filled in tail."
::= { myRouteMapMatchIpAddressEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The acl name apply to ip address. When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). The number of sub-identifiers of this string must be 32,If length of string is less than 32 the sub-identifier(0x0) will be filled in tail.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: myRouteMapMatchIpAddressAclName
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"myRouteMapMatchIpAddressAclName",
"OBJECT-TYPE",
"SYNTAX",
"DisplayString",
"(",
"SIZE",
"(",
"1",
".",
".",
"32",
")",
")",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The acl name apply to ip address. When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). The number of sub-identifiers of this string must be 32,If length of string is less than 32 the sub-identifier(0x0) will be filled in tail.\"",
"::=",
"{",
"myRouteMapMatchIpAddressEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"DisplayString",
[
"octetStringSubType",
[
[
1,
32
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The acl name apply to ip address. When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). The number of sub-identifiers of this string must be 32,If length of string is less than 32 the sub-identifier(0x0) will be filled in tail."
],
null,
null,
null,
null
]
}Module: MY-ROUTE-MIB
See published definition above
{'MY-TC': ['ConfigStatus', 'IfIndex'], 'MY-SMI': ['myMgmt'], 'OSPF-MIB': ['BigMetric'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES7200-ROUTE-MIB
{'OSPF-MIB': ['BigMetric'], 'SNMPv2-TC': ['TruthValue', 'DisplayString', 'RowStatus', 'MacAddress'], 'DES7200-TC': ['ConfigStatus', 'IfIndex'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'IpAddress'], 'DES7200-SMI': ['myMgmt'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.97.2.20.2.2.1.1 | myRouteMapMatchType | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.20.2.2.1.3 | myRouteMapMatchIpAddressStatus | 0 | 0 |