The TTL to be used by this router's originated State Refresh messages if the data packet's TTL is not recorded.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.10.97.2.27.1.1.11
The TTL to be used by this router's originated State Refresh messages if the data packet's TTL is not recorded.
Identification
{1 3 6 1 4 1 171 10 97 2 27 1 1 11}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.171.10.97.2.27.1.1.11.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
myPimStateRefreshTimeToLive OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TTL to be used by this router's originated State
Refresh messages if the data packet's TTL is not
recorded."
DEFVAL { 16 }
::= { myPim 11 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The TTL to be used by this router's originated State Refresh messages if the data packet's TTL is not recorded.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: myPimStateRefreshTimeToLive
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"myPimStateRefreshTimeToLive",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The TTL to be used by this router's originated State Refresh messages if the data packet's TTL is not recorded.\"",
"DEFVAL",
"{",
"16",
"}",
"::=",
"{",
"myPim",
"11",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The TTL to be used by this router's originated State Refresh messages if the data packet's TTL is not recorded."
],
null,
null,
null,
[
"DEFVAL",
16
]
]
}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES7200-PIM-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'experimental', 'NOTIFICATION-TYPE', 'Integer32', 'IpAddress', 'TimeTicks'], 'DES7200-SMI': ['myMgmt'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'IPMROUTE-STD-MIB': ['ipMRouteGroup', 'ipMRouteSource', 'ipMRouteSourceMask', 'ipMRouteNextHopGroup', 'ipMRouteNextHopSource', 'ipMRouteNextHopSourceMask', 'ipMRouteNextHopIfIndex', 'ipMRouteNextHopAddress']}Related source files and packages:
Module: MY-PIM-MIB
{'IF-MIB': ['InterfaceIndex'], 'MY-SMI': ['myMgmt'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'experimental', 'NOTIFICATION-TYPE', 'Integer32', 'IpAddress', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'IPMROUTE-STD-MIB': ['ipMRouteGroup', 'ipMRouteSource', 'ipMRouteSourceMask', 'ipMRouteNextHopGroup', 'ipMRouteNextHopSource', 'ipMRouteNextHopSourceMask', 'ipMRouteNextHopIfIndex', 'ipMRouteNextHopAddress']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.97.2.27.1.1.1 | myPimJoinPruneInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.27.1.1.2 | myPimInterfaceTable | 1 | 29 | |
| 1.3.6.1.4.1.171.10.97.2.27.1.1.3 | myPimNeighborTable | 1 | 11 | |
| 1.3.6.1.4.1.171.10.97.2.27.1.1.4 | myPimIpMRouteTable | 1 | 9 | |
| 1.3.6.1.4.1.171.10.97.2.27.1.1.5 | myPimIpMRouteNextHopTable | 1 | 7 | |
| 1.3.6.1.4.1.171.10.97.2.27.1.1.6 | myPimRPSetTable | 1 | 8 | |
| 1.3.6.1.4.1.171.10.97.2.27.1.1.7 | myPimComponentTable | 1 | 10 | |
| 1.3.6.1.4.1.171.10.97.2.27.1.1.8 | myPimSourceLifetime | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.27.1.1.9 | myPimStateRefreshInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.27.1.1.10 | myPimStateRefreshLimitInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.27.1.1.12 | myPimBsrCandidateGroup | 3 | 3 | |
| 1.3.6.1.4.1.171.10.97.2.27.1.1.13 | myPimRPTable | 1 | 5 | |
| 1.3.6.1.4.1.171.10.97.2.27.1.1.14 | myPimStaticRPTable | 1 | 5 | |
| 1.3.6.1.4.1.171.10.97.2.27.1.1.15 | myPimRpCandidateTable | 1 | 4 |