use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.26
use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command.
Identification
{1 3 6 1 4 1 171 10 97 2 27 1 1 2 1 26}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
myPimInterfaceEnabled OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"use the ip pim command in interface configuration mode.
To disable PIM on the interface, use the no form of this
command."
DEFVAL{disabled}
::= { myPimInterfaceEntry 26 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: myPimInterfaceEnabled
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"myPimInterfaceEnabled",
"OBJECT-TYPE",
"SYNTAX",
"EnabledStatus",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command.\"",
"DEFVAL",
"{",
"disabled",
"}",
"::=",
"{",
"myPimInterfaceEntry",
"26",
"}"
],
"syntax_tree": [
[
"row",
"EnabledStatus"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command."
],
null,
null,
null,
[
"DEFVAL",
"disabled"
]
]
}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES7200-PIM-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'experimental', 'NOTIFICATION-TYPE', 'Integer32', 'IpAddress', 'TimeTicks'], 'DES7200-SMI': ['myMgmt'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'IPMROUTE-STD-MIB': ['ipMRouteGroup', 'ipMRouteSource', 'ipMRouteSourceMask', 'ipMRouteNextHopGroup', 'ipMRouteNextHopSource', 'ipMRouteNextHopSourceMask', 'ipMRouteNextHopIfIndex', 'ipMRouteNextHopAddress']}Related source files and packages:
Module: MY-PIM-MIB
{'IF-MIB': ['InterfaceIndex'], 'MY-SMI': ['myMgmt'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'experimental', 'NOTIFICATION-TYPE', 'Integer32', 'IpAddress', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'IPMROUTE-STD-MIB': ['ipMRouteGroup', 'ipMRouteSource', 'ipMRouteSourceMask', 'ipMRouteNextHopGroup', 'ipMRouteNextHopSource', 'ipMRouteNextHopSourceMask', 'ipMRouteNextHopIfIndex', 'ipMRouteNextHopAddress']}Related source files and packages:
Registration