Route address and mask that matched against this source.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.10.97.2.28.1.2.1.4
Route address and mask that matched against this source.
Identification
{1 3 6 1 4 1 171 10 97 2 28 1 2 1 4}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DES7200-MULTICAST-MIB, the row index myIpRpfSourceAddress is declared as IpAddress. The IPv4 address is encoded as four numeric subidentifiers, one for each address octet. For example, a row with address 192.0.2.10 has the instance .1.3.6.1.4.1.171.10.97.2.28.1.2.1.4.192.0.2.10. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.97.2.28.1.2.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
myIpRpfRouteAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Route address and mask that matched against this source."
::= { myIpRpfEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Route address and mask that matched against this source.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: myIpRpfRouteAddress
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"myIpRpfRouteAddress",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Route address and mask that matched against this source.\"",
"::=",
"{",
"myIpRpfEntry",
"4",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Route address and mask that matched against this source."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES7200-MULTICAST-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TruthValue'], 'DES7200-TC': ['IfIndex'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'experimental', 'Counter32', 'Gauge32', 'Integer32', 'IpAddress', 'TimeTicks'], 'DES7200-SMI': ['myMgmt'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANA-RTPROTO-MIB': ['IANAipRouteProtocol', 'IANAipMRouteProtocol']}Related source files and packages:
Module: MY-MULTICAST-MIB
{'MY-TC': ['IfIndex'], 'IF-MIB': ['InterfaceIndex'], 'MY-SMI': ['myMgmt'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'experimental', 'Counter32', 'Gauge32', 'Integer32', 'IpAddress', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANA-RTPROTO-MIB': ['IANAipRouteProtocol', 'IANAipMRouteProtocol']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.97.2.28.1.2.1.1 | myIpRpfSourceAddress | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.28.1.2.1.2 | myIpRpfInterface | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.28.1.2.1.3 | myIpRpfNeighborAddress | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.28.1.2.1.5 | myIpRpfRouteMask | 0 | 0 | |
| 1.3.6.1.4.1.171.10.97.2.28.1.2.1.6 | myIpRpfType | 0 | 0 |