Incoming interface's limit for rate limiting data traffic, in Kbps.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.10.97.2.28.1.4.1.12
Incoming interface's limit for rate limiting data traffic, in Kbps.
Identification
{1 3 6 1 4 1 171 10 97 2 28 1 4 1 12}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DES7200-MULTICAST-MIB, the row index consists of these components in order:
myIpMRouteGroup (IpAddress): four numeric subidentifiers, one per IPv4 address octet.myIpMRouteSource (IpAddress): four numeric subidentifiers, one per IPv4 address octet.myIpMRouteSourceMask (IpAddress): four numeric subidentifiers, one per IPv4 address octet.An instance has the form .1.3.6.1.4.1.171.10.97.2.28.1.4.1.12.<myIpMRouteGroup: four octets>.<myIpMRouteSource: four octets>.<myIpMRouteSourceMask: four octets>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.97.2.28.1.4.1.12
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
myIpMRouteInLimit OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "Kbits/second"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Incoming interface's limit for rate limiting data
traffic, in Kbps. "
::= { myIpMRouteEntry 12 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Incoming interface's limit for rate limiting data traffic, in Kbps.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: obsolete.
Names: myIpMRouteInLimit
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"myIpMRouteInLimit",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"2147483647",
")",
"UNITS",
[
"literal",
"224b626974732f7365636f6e6422"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"obsolete",
"DESCRIPTION",
"\"Incoming interface's limit for rate limiting data traffic, in Kbps. \"",
"::=",
"{",
"myIpMRouteEntry",
"12",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
2147483647
]
]
]
],
[
"UNITS",
"Kbits/second"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"obsolete"
],
[
"DESCRIPTION",
"Incoming interface's limit for rate limiting data traffic, in Kbps."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES7200-MULTICAST-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TruthValue'], 'DES7200-TC': ['IfIndex'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'experimental', 'Counter32', 'Gauge32', 'Integer32', 'IpAddress', 'TimeTicks'], 'DES7200-SMI': ['myMgmt'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANA-RTPROTO-MIB': ['IANAipRouteProtocol', 'IANAipMRouteProtocol']}Related source files and packages:
Module: MY-MULTICAST-MIB
{'MY-TC': ['IfIndex'], 'IF-MIB': ['InterfaceIndex'], 'MY-SMI': ['myMgmt'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'experimental', 'Counter32', 'Gauge32', 'Integer32', 'IpAddress', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANA-RTPROTO-MIB': ['IANAipRouteProtocol', 'IANAipMRouteProtocol']}Related source files and packages:
Registration