Status in source: current.
Names: swDevInfoFrontPanelLedStatus
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swDevInfoFrontPanelLedStatus",
"OBJECT-TYPE",
"SYNTAX",
"OCTET",
"STRING",
"(",
"SIZE",
"(",
"0",
".",
".",
"127",
")",
")",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is a set of system LED indications. The first four octets are defined as system LED. The first two octets are currently unused and must be set to zero. The third octet indicates the power LED. The fourth octet indicates the console LED. The fifth LED is RPS (Redundancy Power Supply) LED. The sixth LED is SD card LED, the following description is for SD card LED: 01 = SD card is not present. 02 = SD card is present. 03 = fails to read/write SD card. 04 = read/write SD card successfully. The other octets are the logical port LED. Every two bytes are presented to a port. The first byte is presented as the Link/Activity LED. The second byte is presented as the Speed LED. System LED: 01 = fail/error/non existence. 02 = work normal Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks. The second most significant bit is used for link status: 1 = link fail. 2 = link pass. Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. The four remaining bits are currently unused and must be 0.\"",
"::=",
"{",
"swL2DevInfo",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OCTET STRING",
[
"octetStringSubType",
[
[
0,
127
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is a set of system LED indications. The first four octets are defined as system LED. The first two octets are currently unused and must be set to zero. The third octet indicates the power LED. The fourth octet indicates the console LED. The fifth LED is RPS (Redundancy Power Supply) LED. The sixth LED is SD card LED, the following description is for SD card LED: 01 = SD card is not present. 02 = SD card is present. 03 = fails to read/write SD card. 04 = read/write SD card successfully. The other octets are the logical port LED. Every two bytes are presented to a port. The first byte is presented as the Link/Activity LED. The second byte is presented as the Speed LED. System LED: 01 = fail/error/non existence. 02 = work normal Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks. The second most significant bit is used for link status: 1 = link fail. 2 = link pass. Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. The four remaining bits are currently unused and must be 0."
],
null,
null,
null,
null
]
}
- D-Link official switch MIBs
· Publisher's source file: Source package: DGS-3200_series_FW_1.50.B019_MIB.zip
Module: DGS3224-L2MGMT-MIB
See published definition above
Module imports
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['IpAddress', 'TimeTicks', 'Integer32', 'Unsigned32', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'DLINK-ID-REC-MIB': ['AgentNotifyLevel'], 'SW3200PRIMGMT-MIB': ['dgs3224']}
Related source files and packages:
- D-Link official switch MIBs
· Publisher's source file: Source package: DGS-3200_series_FW_2.00.12_MIB.zip
Module: DGS3224-L2MGMT-MIB
Same published definition
Module imports
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['IpAddress', 'TimeTicks', 'Integer32', 'Unsigned32', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'DLINK-ID-REC-MIB': ['AgentNotifyLevel'], 'SW3200PRIMGMT-MIB': ['dgs3224']}
Related source files and packages:
Same file in DGS-3200_series_FW_2.00.12_MIB.zip.
- D-Link MIB copies (LibreNMS/Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive.
D-Link support.
Module: DGS3224-L2MGMT-MIB
Same published definition
Module imports
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['IpAddress', 'TimeTicks', 'Integer32', 'Unsigned32', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'DLINK-ID-REC-MIB': ['AgentNotifyLevel'], 'SW3200PRIMGMT-MIB': ['dgs3224']}
Related source files and packages: