OID reference
1.3.6.1.4.1.171.11.102.1.5.2.30.2
This object indicates the port which the synchronous ethernet get the clock from. The port number is the sequential (logical) number which is also applied to the bridge MIB. When set to '0', means not specify any port as source port.
Identification
{1 3 6 1 4 1 171 11 102 1 5 2 30 2}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.171.11.102.1.5.2.30.2.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
swL2SyncEthernetSourcePort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the port which the synchronous ethernet
get the clock from.
The port number is the sequential (logical)
number which is also applied to the bridge MIB.
When set to '0', means not specify any port as source port."
::= { swL2SyncEthernetMgmt 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object indicates the port which the synchronous ethernet get the clock from. The port number is the sequential (logical) number which is also applied to the bridge MIB. When set to '0', means not specify any port as source port.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swL2SyncEthernetSourcePort
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swL2SyncEthernetSourcePort",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"65535",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the port which the synchronous ethernet get the clock from. The port number is the sequential (logical) number which is also applied to the bridge MIB. When set to '0', means not specify any port as source port.\"",
"::=",
"{",
"swL2SyncEthernetMgmt",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the port which the synchronous ethernet get the clock from. The port number is the sequential (logical) number which is also applied to the bridge MIB. When set to '0', means not specify any port as source port."
],
null,
null,
null,
null
]
}Module: DGS-3710-12C-L2MGMT-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['IpAddress', 'TimeTicks', 'Integer32', 'Unsigned32', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'RFC1155-SMI': ['Counter'], 'DLINK-ID-REC-MIB': ['AgentNotifyLevel'], 'SW3700PRIMGMT-MIB': ['dgs3712c']}Related source files and packages:
Same file in DGS-3710-12C_A1_FW_v1.00.029_MIB_v1.00.029.rar.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DGS-3710-12C-L2MGMT-MIB
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['IpAddress', 'TimeTicks', 'Integer32', 'Unsigned32', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'RFC1155-SMI': ['Counter'], 'DLINK-ID-REC-MIB': ['AgentNotifyLevel'], 'SW3700PRIMGMT-MIB': ['dgs3712c']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.102.1.5.2.30.1 | swL2SyncEthernetState | 0 | 0 | |
| 1.3.6.1.4.1.171.11.102.1.5.2.30.3 | swL2SyncEthernetSourceClock | 0 | 0 |