OID reference

swLedInfoFrontPanelLedStatus

1.3.6.1.4.1.171.11.119.2.4.1.1.1.2

Description

This object is a set of system LED indicators. The first 32 octets are defined as next, and following octets are for logical port LED. Octet 1 is box ID led bit 7-6: reserved bit 5-4: 00B = no error 01B = system self-test error 10B = safeguard engine entering the exhausted mode bit 3-0: The actual box ID. 0x1 = box ID…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.171.11.119.2.4.1.1.1 (swLedInfoEntry)
Node code
2
Node name
swLedInfoFrontPanelLedStatus
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.171.11.119.2.4.1.1.1.2
URN notation
urn:oid:1.3.6.1.4.1.171.11.119.2.4.1.1.1.2
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 171 11 119 2 4 1 1 1 2}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) company(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) my(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nms(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) dlink(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) d-link(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) company(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) my(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nms(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) dlink(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) d-link(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) company(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) my(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nms(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) dlink(171) dlink-mgmt(11) dlink-Dgs3420Proj(119) dlink-Dgs3420Proj-Dgs3420-28SC(2) swLedMIB(4) swLedMIBObject(1) swLedInfoTable(1) swLedInfoEntry(1) swLedInfoFrontPanelLedStatus(2)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/171/11/119/2/4/1/1/1/2
  • /ISO/Identified-Organization/6/1/4/1/171/11/119/2/4/1/1/1/2
  • /ISO/3/6/1/4/1/171/11/119/2/4/1/1/1/2
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/enterprise/company/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/enterprise/my/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/enterprise/nms/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/enterprises/dlink/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/enterprises/d-link/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/enterprises/company/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/enterprises/my/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/enterprises/nms/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/dlink/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/d-link/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/company/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/my/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/nms/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/dlink/dlink-mgmt/dlink-Dgs3420Proj/dlink-Dgs3420Proj-Dgs3420-28SC/swLedMIB/swLedMIBObject/swLedInfoTable/swLedInfoEntry/swLedInfoFrontPanelLedStatus
  • Additional combinations skipped.

SNMP properties

Value type
OCTET STRING
Maximum access defined by MIB
read-only
Status in MIB
current

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In LED-MIB, the row index swLedInfoUnitId is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.11.119.2.4.1.1.1.2.<swLedInfoUnitId>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.11.119.2.4.1.1.1.2

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

swLedInfoFrontPanelLedStatus OBJECT-TYPE
        SYNTAX  OCTET STRING 
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
				"This object is a set of system LED indicators. The first 32 octets are 
				defined as next, and following octets are for logical port LED.
				
				Octet 1 is box ID led
						bit 7-6:
							reserved
						bit 5-4:
							00B = no error
							01B = system self-test error
							10B = safeguard engine entering the exhausted mode
						bit 3-0:
							The actual box ID.
							0x1 = box ID 1
							0x2 = box ID 2
							...
												
				Octet 2 is power led:
						0x01 = power work normally                    
						0x02 = power fail						

				Octet 3 is RPS led:
						0x01 = RPS is not connected										
						0x02 = RPS is connected to switch but not ready to power the switch
						0x03 = RPS is ready to power the switch
						0x04 = RPS is powering the switch

				Octet 4 is console led:
						0x01 = system start up
						0x02 = a user is login through console
						0x03 = no user is login through console

				Octet 5 is master led:
						0x00 = standalone
						0x01 = master
						0x02 = back master
						0x03 = slave

				Octet 6 is fan led:
						0x01 = all fans are OK
						0x02 = one or more fans fail
						
				Octet 7 is SD card led:
						0x01 = SD card is unplugged
						0x02 = SD card is plugged
						0x03 = reading/writing
						0x04 = read/write fail
				
				Octet 8 is SIO port led:
						bit 7-2:
							reserved
						bit 1:
							SIO1 link state
							0B = linkdown
							1B = linkup
						bit 0:
							SIO2 link state
							0B = linkdown
							1B = linkup
						
				Octet 9 is POE led:
						0x01 = can not support POE
						0x02 = link/act/speed mode
						0x03 = POE mode
				
				Octet 10 is MGMT port led:
						bit 7-4:
							reserved
						bit 3:
							0B = half duplex
							1B = full duplex

						bit 2-0:
							0x0 = link down
							0x1 = 10Mbps
							0x2 = 100Mbps
							0x3 = 1000Mbps
				
				Octet 11-32 are reserved.

				The continued octets are the logic port led. Each octet presents one port. 
				
				There are two modes: link/act/speed mode and POE mode. 
					The link/act/speed mode presents the speed duplex of port.
					The POE mode presents if the port deliver power to PD. 
					The POE mode is supported by POE Switch only.
				
				The mode is determined by Octet 9. If the switch can not support POE, 
				the mode is link/act/speed only.
						
				In each octet:
				link/act/speed mode:
						bit 7:
							0B = port is not activity
							1B = port is activity
						bit 6:
							0B = not combo port
							1B = combo port

						bit 5:
							the bit is available only when the port is combo port and linkup
							0B = fiber linkup
							1B = copper linkup

						bit 4:
							reserved
						bit 3:
							0B = half duplex
							1B = full duplex

						bit 2-0:
							0x0 = link down
							0x1 = 10Mbps
							0x2 = 100Mbps
							0x3 = 1000Mbps
							0x4 = 10Gbps
						
				POE mode:
						0x00 = no PD connected.
						0x01 = no deliver power to PD.
						0x02 = deliver power to PD."
        ::= { swLedInfoEntry 2 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

This object is a set of system LED indicators. The first 32 octets are defined as next, and following octets are for logical port LED. Octet 1 is box ID led bit 7-6: reserved bit 5-4: 00B = no error 01B = system self-test error 10B = safeguard engine entering the exhausted mode bit 3-0: The actual box ID. 0x1 = box ID 1 0x2 = box ID 2 ... Octet 2 is power led: 0x01 = power work normally 0x02 = power fail Octet 3 is RPS led: 0x01 = RPS is not connected 0x02 = RPS is connected to switch but not ready to power the switch 0x03 = RPS is ready to power the switch 0x04 = RPS is powering the switch Octet 4 is console led: 0x01 = system start up 0x02 = a user is login through console 0x03 = no user is login through console Octet 5 is master led: 0x00 = standalone 0x01 = master 0x02 = back master 0x03 = slave Octet 6 is fan led: 0x01 = all fans are OK 0x02 = one or more fans fail Octet 7 is SD card led: 0x01 = SD card is unplugged 0x02 = SD card is plugged 0x03 = reading/writing 0x04 = read/write fail Octet 8 is SIO port led: bit 7-2: reserved bit 1: SIO1 link state 0B = linkdown 1B = linkup bit 0: SIO2 link state 0B = linkdown 1B = linkup Octet 9 is POE led: 0x01 = can not support POE 0x02 = link/act/speed mode 0x03 = POE mode Octet 10 is MGMT port led: bit 7-4: reserved bit 3: 0B = half duplex 1B = full duplex bit 2-0: 0x0 = link down 0x1 = 10Mbps 0x2 = 100Mbps 0x3 = 1000Mbps Octet 11-32 are reserved. The continued octets are the logic port led. Each octet presents one port. There are two modes: link/act/speed mode and POE mode. The link/act/speed mode presents the speed duplex of port. The POE mode presents if the port deliver power to PD. The POE mode is supported by POE Switch only. The mode is determined by Octet 9. If the switch can not support POE, the mode is link/act/speed only. In each octet: link/act/speed mode: bit 7: 0B = port is not activity 1B = port is activity bit 6: 0B = not combo port 1B = combo port bit 5: the bit is available only when the port is combo port and linkup 0B = fiber linkup 1B = copper linkup bit 4: reserved bit 3: 0B = half duplex 1B = full duplex bit 2-0: 0x0 = link down 0x1 = 10Mbps 0x2 = 100Mbps 0x3 = 1000Mbps 0x4 = 10Gbps POE mode: 0x00 = no PD connected. 0x01 = no deliver power to PD. 0x02 = deliver power to PD.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1D-Link official switch MIBs1 record · 1 source

Description 1

swLedInfoFrontPanelLedStatus · currentD-Link official switch MIBs1 source

Status in source: current.

Names: swLedInfoFrontPanelLedStatus

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swLedInfoFrontPanelLedStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "OCTET",
    "STRING",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object is a set of system LED indicators. The first 32 octets are defined as next, and following octets are for logical port LED. Octet 1 is box ID led bit 7-6: reserved bit 5-4: 00B = no error 01B = system self-test error 10B = safeguard engine entering the exhausted mode bit 3-0: The actual box ID. 0x1 = box ID 1 0x2 = box ID 2 ... Octet 2 is power led: 0x01 = power work normally 0x02 = power fail Octet 3 is RPS led: 0x01 = RPS is not connected 0x02 = RPS is connected to switch but not ready to power the switch 0x03 = RPS is ready to power the switch 0x04 = RPS is powering the switch Octet 4 is console led: 0x01 = system start up 0x02 = a user is login through console 0x03 = no user is login through console Octet 5 is master led: 0x00 = standalone 0x01 = master 0x02 = back master 0x03 = slave Octet 6 is fan led: 0x01 = all fans are OK 0x02 = one or more fans fail Octet 7 is SD card led: 0x01 = SD card is unplugged 0x02 = SD card is plugged 0x03 = reading/writing 0x04 = read/write fail Octet 8 is SIO port led: bit 7-2: reserved bit 1: SIO1 link state 0B = linkdown 1B = linkup bit 0: SIO2 link state 0B = linkdown 1B = linkup Octet 9 is POE led: 0x01 = can not support POE 0x02 = link/act/speed mode 0x03 = POE mode Octet 10 is MGMT port led: bit 7-4: reserved bit 3: 0B = half duplex 1B = full duplex bit 2-0: 0x0 = link down 0x1 = 10Mbps 0x2 = 100Mbps 0x3 = 1000Mbps Octet 11-32 are reserved. The continued octets are the logic port led. Each octet presents one port. There are two modes: link/act/speed mode and POE mode. The link/act/speed mode presents the speed duplex of port. The POE mode presents if the port deliver power to PD. The POE mode is supported by POE Switch only. The mode is determined by Octet 9. If the switch can not support POE, the mode is link/act/speed only. In each octet: link/act/speed mode: bit 7: 0B = port is not activity 1B = port is activity bit 6: 0B = not combo port 1B = combo port bit 5: the bit is available only when the port is combo port and linkup 0B = fiber linkup 1B = copper linkup bit 4: reserved bit 3: 0B = half duplex 1B = full duplex bit 2-0: 0x0 = link down 0x1 = 10Mbps 0x2 = 100Mbps 0x3 = 1000Mbps 0x4 = 10Gbps POE mode: 0x00 = no PD connected. 0x01 = no deliver power to PD. 0x02 = deliver power to PD.\"",
    "::=",
    "{",
    "swLedInfoEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "OCTET STRING"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object is a set of system LED indicators. The first 32 octets are defined as next, and following octets are for logical port LED. Octet 1 is box ID led bit 7-6: reserved bit 5-4: 00B = no error 01B = system self-test error 10B = safeguard engine entering the exhausted mode bit 3-0: The actual box ID. 0x1 = box ID 1 0x2 = box ID 2 ... Octet 2 is power led: 0x01 = power work normally 0x02 = power fail Octet 3 is RPS led: 0x01 = RPS is not connected 0x02 = RPS is connected to switch but not ready to power the switch 0x03 = RPS is ready to power the switch 0x04 = RPS is powering the switch Octet 4 is console led: 0x01 = system start up 0x02 = a user is login through console 0x03 = no user is login through console Octet 5 is master led: 0x00 = standalone 0x01 = master 0x02 = back master 0x03 = slave Octet 6 is fan led: 0x01 = all fans are OK 0x02 = one or more fans fail Octet 7 is SD card led: 0x01 = SD card is unplugged 0x02 = SD card is plugged 0x03 = reading/writing 0x04 = read/write fail Octet 8 is SIO port led: bit 7-2: reserved bit 1: SIO1 link state 0B = linkdown 1B = linkup bit 0: SIO2 link state 0B = linkdown 1B = linkup Octet 9 is POE led: 0x01 = can not support POE 0x02 = link/act/speed mode 0x03 = POE mode Octet 10 is MGMT port led: bit 7-4: reserved bit 3: 0B = half duplex 1B = full duplex bit 2-0: 0x0 = link down 0x1 = 10Mbps 0x2 = 100Mbps 0x3 = 1000Mbps Octet 11-32 are reserved. The continued octets are the logic port led. Each octet presents one port. There are two modes: link/act/speed mode and POE mode. The link/act/speed mode presents the speed duplex of port. The POE mode presents if the port deliver power to PD. The POE mode is supported by POE Switch only. The mode is determined by Octet 9. If the switch can not support POE, the mode is link/act/speed only. In each octet: link/act/speed mode: bit 7: 0B = port is not activity 1B = port is activity bit 6: 0B = not combo port 1B = combo port bit 5: the bit is available only when the port is combo port and linkup 0B = fiber linkup 1B = copper linkup bit 4: reserved bit 3: 0B = half duplex 1B = full duplex bit 2-0: 0x0 = link down 0x1 = 10Mbps 0x2 = 100Mbps 0x3 = 1000Mbps 0x4 = 10Gbps POE mode: 0x00 = no PD connected. 0x01 = no deliver power to PD. 0x02 = deliver power to PD."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.171)

Henry P. Nagai

Siblings (1)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.171.11.119.2.4.1.1.1.1 swLedInfoUnitId00