Status in source: mandatory.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swDevInfoSystemLedStatus",
"OBJECT-TYPE",
"SYNTAX",
"OCTET",
"STRING",
"(",
"SIZE",
"(",
"0",
".",
".",
"127",
")",
")",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"This object is a set of system LED indications. The first four octets is defined as system LED. The first LED is power LED. The second LED is console LED. The third LED is GIGA module existing LED. The fourth LED is GIGA module link LED. The other octets following the fourth octets are the port LED. Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED. There is one byte per LED. The most significant bit is used for blink/solid: Off = The LED is lit permanently. On = The LED blinks. The three least significant bits are used for color: 1 = not lit, 2 = green, 3 = yellow,(orange) 4 = blue, 5 = red, 0+6+7 not used The four remaining bits are currently unused and must be 0. The lastest two octects are defined as slot module type. The first octect is slot 1 module type. The second octect is slot 2 module type, and so on. The module type representation for each byte is listed below: 1 = no slot module, 2 = 1 port BNC, 3 = 2 port Fiber MTRJ, 4 = 2 port TX UTP, 5 = 1 port Fiber SC, 6 = Gigabit other not used\"",
"::=",
"{",
"swDevInfo",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OCTET STRING",
[
"octetStringSubType",
[
[
0,
127
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"This object is a set of system LED indications. The first four octets is defined as system LED. The first LED is power LED. The second LED is console LED. The third LED is GIGA module existing LED. The fourth LED is GIGA module link LED. The other octets following the fourth octets are the port LED. Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED. There is one byte per LED. The most significant bit is used for blink/solid: Off = The LED is lit permanently. On = The LED blinks. The three least significant bits are used for color: 1 = not lit, 2 = green, 3 = yellow,(orange) 4 = blue, 5 = red, 0+6+7 not used The four remaining bits are currently unused and must be 0. The lastest two octects are defined as slot module type. The first octect is slot 1 module type. The second octect is slot 2 module type, and so on. The module type representation for each byte is listed below: 1 = no slot module, 2 = 1 port BNC, 3 = 2 port Fiber MTRJ, 4 = 2 port TX UTP, 5 = 1 port Fiber SC, 6 = Gigabit other not used"
],
null,
null,
null,
null
]
}