Description 1
Specifies that the switch will examine each frame's Protocol ID field or not.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.11.5.1.2.1.16
Specifies that the switch will examine each frame's Protocol ID field or not.
Identification
{1 3 6 1 4 1 171 11 5 1 2 1 16}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | deny | 3, 4 |
| 1 | enable | 1 |
| 2 | disable | 1 |
| 2 | permit | 3, 4 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In SW-DES3x50-ACLMGMT-MIB, the row index swACLIpProfileID is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.11.5.1.2.1.16.<swACLIpProfileID>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.11.5.1.2.1.16
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 4 distinct definitions; some records may not include a definition.
swACLIpProtoIDOption OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies that the switch will examine each frame's Protocol ID field or not."
::= { swACLIpEntry 16 }swACLIpProtoIDMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies that the rule applies to the IP protocol ID and the mask options
behind the IP header."
::= { swACLIpEntry 16 }swACLIpPermit OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"This object indicates filter is permit or deny;
default is permit(1)"
::= { swACLIpEntry 16 }swACLIpPermit OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates filter is permit or deny;
default is permit(1)"
::= { swACLIpEntry 16 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Specifies that the switch will examine each frame's Protocol ID field or not.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
Specifies that the rule applies to the IP protocol ID and the mask options behind the IP header.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 3
This object indicates filter is permit or deny; default is permit(1)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swACLIpProtoIDOption
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLIpProtoIDOption",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies that the switch will examine each frame's Protocol ID field or not.\"",
"::=",
"{",
"swACLIpEntry",
"16",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies that the switch will examine each frame's Protocol ID field or not."
],
null,
null,
null,
null
]
}Module: SW-ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: SW-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Status in source: current.
Names: swACLIpProtoIDMask
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLIpProtoIDMask",
"OBJECT-TYPE",
"SYNTAX",
"OCTET",
"STRING",
"(",
"SIZE",
"(",
"4",
")",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies that the rule applies to the IP protocol ID and the mask options behind the IP header.\"",
"::=",
"{",
"swACLIpEntry",
"16",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OCTET STRING",
[
"octetStringSubType",
[
[
4
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies that the rule applies to the IP protocol ID and the mask options behind the IP header."
],
null,
null,
null,
null
]
}Module: SW-DES3x50-ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Module: SW-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: SW-DES3x50-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Status in source: obsolete.
Names: swACLIpPermit
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLIpPermit",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"deny",
"(",
"1",
")",
",",
"permit",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"obsolete",
"DESCRIPTION",
"\"This object indicates filter is permit or deny; default is permit(1)\"",
"::=",
"{",
"swACLIpEntry",
"16",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"deny",
1
],
[
"permit",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"obsolete"
],
[
"DESCRIPTION",
"This object indicates filter is permit or deny; default is permit(1)"
],
null,
null,
null,
null
]
}Module: SW-ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Status in source: current.
Names: swACLIpPermit
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLIpPermit",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"deny",
"(",
"1",
")",
",",
"permit",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates filter is permit or deny; default is permit(1)\"",
"::=",
"{",
"swACLIpEntry",
"16",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"deny",
1
],
[
"permit",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates filter is permit or deny; default is permit(1)"
],
null,
null,
null,
null
]
}Module: SW-ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.5.1.2.1.1 | swACLIpProfileID | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.2 | swACLIpUsevlan | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.3 | swACLIpIpAddrMaskState | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.4 | swACLIpSrcIpAddrMask | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.5 | swACLIpDstIpAddrMask | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.6 | swACLIpUseDSCP, swACLIpUseDSCPOrTos | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.7 | swACLIpUseProtoType | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.8 | swACLIpIcmpOption | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.9 | swACLIpIgmpOption | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.10 | swACLIpTcpOption | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.11 | swACLIpUdpOption | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.12 | swACLIpTCPorUDPSrcPortMask | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.13 | swACLIpTCPorUDPDstPortMask | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.14 | swACLIpTCPFlagBit, swACLIpProtoIDOption | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.15 | swACLIpProtoIDOption, swACLIpProtoIDMask | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.17 | swACLIpPort, swACLIpRowStatus, swACLIpProtoIDMask, swACLIpPermit | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.18 | swACLIpRowStatus, swACLIpPort | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.19 | swACLIpRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.1.2.1.115 | swACLIpTCPFlagBitMask | 0 | 0 |