OID reference
1.3.6.1.4.1.171.11.63.7.2.4.3.1.2
The object indicates the master port number of the port trunk entry. The first port of the trunk is implicitly configured to be the master logical port. When using a Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be the same as the master port (e.g. spee…
Identification
{1 3 6 1 4 1 171 11 63 7 2 4 3 1 2}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DES3028P-L2MGMT-MIB, the row index swPortTrunkIndex is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.11.63.7.2.4.3.1.2.<swPortTrunkIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.11.63.7.2.4.3.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
swPortTrunkMasterPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the master port number of the port trunk entry. The
first port of the trunk is implicitly configured to be the master logical
port. When using a Port Trunk, you can not configure the other ports of
the group except the master port. Their configuration must be the same as the
master port (e.g. speed, duplex, enabled/disabled, flow control, and so on)."
::= { swPortTrunkEntry 2 }swPortTrunkMasterPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the master port number of the port trunk entry. The
first port of the trunk is implicitly configured to be the master logical
port. When using a Port Trunk, you can not configure the other ports of
the group except the master port. Their configuration must be the same as the
master port (e.g. speed, duplex, enabled/disabled, flow control, and so on)."
::= { swPortTrunkEntry 2 }swPortTrunkMasterPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the master port number of the port trunk entry.The
first port of the trunk is implicitly configured to be the master logical
port.When using Port Trunk, you can not configure the other ports of
the group except the master port. Their configuration must be same as the
master port (e.g. speed, duplex, enabled/disabled, flow control, and so on)."
::= { swPortTrunkEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The object indicates the master port number of the port trunk entry. The first port of the trunk is implicitly configured to be the master logical port. When using a Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be the same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
The object indicates the master port number of the port trunk entry.The first port of the trunk is implicitly configured to be the master logical port.When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swPortTrunkMasterPort
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swPortTrunkMasterPort",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The object indicates the master port number of the port trunk entry. The first port of the trunk is implicitly configured to be the master logical port. When using a Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be the same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).\"",
"::=",
"{",
"swPortTrunkEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The object indicates the master port number of the port trunk entry. The first port of the trunk is implicitly configured to be the master logical port. When using a Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be the same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on)."
],
null,
null,
null,
null
]
}Module: DES3028P-L2MGMT-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'TimeTicks'], 'RFC1155-SMI': ['IpAddress'], 'RFC1213-MIB': ['DisplayString'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'SWPRIMGMT-DES30XXP-MIB': ['des3028p']}Related source files and packages:
Module: DES3028P-L2MGMT-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'TimeTicks'], 'RFC1155-SMI': ['IpAddress'], 'RFC1213-MIB': ['DisplayString'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'SWPRIMGMT-DES30XXP-MIB': ['des3028p']}Related source files and packages:
Same file in DES3028_R2.94_MIB.zip.
Same file in DES3028_R2.94_MIB.zip.
Same file in DES3028_R2.94_MIB.zip.
Same file in DES3028_R2.94_MIB.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES3028P-L2MGMT-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'TimeTicks'], 'RFC1155-SMI': ['IpAddress'], 'RFC1213-MIB': ['DisplayString'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'SWPRIMGMT-DES30XXP-MIB': ['des3028p']}Related source files and packages:
Status in source: current.
Names: swPortTrunkMasterPort
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swPortTrunkMasterPort",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The object indicates the master port number of the port trunk entry.The first port of the trunk is implicitly configured to be the master logical port.When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).\"",
"::=",
"{",
"swPortTrunkEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The object indicates the master port number of the port trunk entry.The first port of the trunk is implicitly configured to be the master logical port.When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on)."
],
null,
null,
null,
null
]
}Module: DES3028P-L2MGMT-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32'], 'RFC1155-SMI': ['IpAddress'], 'RFC1213-MIB': ['DisplayString'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'SWPRIMGMT-DES30XXP-MIB': ['des3028p']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.63.7.2.4.3.1.1 | swPortTrunkIndex | 0 | 0 | |
| 1.3.6.1.4.1.171.11.63.7.2.4.3.1.3 | swPortTrunkPortList | 0 | 0 | |
| 1.3.6.1.4.1.171.11.63.7.2.4.3.1.4 | swPortTrunkType | 0 | 0 | |
| 1.3.6.1.4.1.171.11.63.7.2.4.3.1.5 | swPortTrunkActivePort | 0 | 0 | |
| 1.3.6.1.4.1.171.11.63.7.2.4.3.1.6 | swPortTrunkState | 0 | 0 | |
| 1.3.6.1.4.1.171.11.63.7.2.4.3.1.7 | swPortTrunkFloodingPort | 0 | 0 |