Description 1
For C-RPs, this is the Holdtime specified in C-RP-Adv message, and is used by the BSR to time out RPs. This should be set to 2.5 * [C-RP-Adv-Period]. Default: 150 seconds.
OID reference
1.3.6.1.4.1.171.11.69.2.3.11.2.1
For C-RPs, this is the Holdtime specified in C-RP-Adv message, and is used by the BSR to time out RPs. This should be set to 2.5 * [C-RP-Adv-Period]. Default: 150 seconds.
Identification
{1 3 6 1 4 1 171 11 69 2 3 11 2 1}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.171.11.69.2.3.11.2.1.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
swL3pimCandidateRPHoldtime OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For C-RPs, this is the Holdtime specified in C-RP-Adv message, and
is used by the BSR to time out RPs. This should be set to 2.5 *
[C-RP-Adv-Period]. Default: 150 seconds."
::= { swL3pimCandidateRPMgmt 1 }swL3pimCandidateRPHoldtime OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For C-RPs, this is the holdtime specified in the C-RP-Adv message,
and is used by the BSR to time out RPs. This should be set to 2.5 *
[C-RP-Adv-Period]. Default: 150 seconds."
::= { swL3pimCandidateRPMgmt 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
For C-RPs, this is the Holdtime specified in C-RP-Adv message, and is used by the BSR to time out RPs. This should be set to 2.5 * [C-RP-Adv-Period]. Default: 150 seconds.
Description 2
For C-RPs, this is the holdtime specified in the C-RP-Adv message, and is used by the BSR to time out RPs. This should be set to 2.5 * [C-RP-Adv-Period]. Default: 150 seconds.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swL3pimCandidateRPHoldtime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swL3pimCandidateRPHoldtime",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"255",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"For C-RPs, this is the Holdtime specified in C-RP-Adv message, and is used by the BSR to time out RPs. This should be set to 2.5 * [C-RP-Adv-Period]. Default: 150 seconds.\"",
"::=",
"{",
"swL3pimCandidateRPMgmt",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"For C-RPs, this is the Holdtime specified in C-RP-Adv message, and is used by the BSR to time out RPs. This should be set to 2.5 * [C-RP-Adv-Period]. Default: 150 seconds."
],
null,
null,
null,
null
]
}Module: DES3828DC-L3MGMT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW3800PRIMGMT-MIB': ['des3828DC']}Related source files and packages:
Status in source: current.
Names: swL3pimCandidateRPHoldtime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swL3pimCandidateRPHoldtime",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"255",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"For C-RPs, this is the holdtime specified in the C-RP-Adv message, and is used by the BSR to time out RPs. This should be set to 2.5 * [C-RP-Adv-Period]. Default: 150 seconds.\"",
"::=",
"{",
"swL3pimCandidateRPMgmt",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"For C-RPs, this is the holdtime specified in the C-RP-Adv message, and is used by the BSR to time out RPs. This should be set to 2.5 * [C-RP-Adv-Period]. Default: 150 seconds."
],
null,
null,
null,
null
]
}Module: DES3828DC-SWL3MGMT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW3800PRIMGMT-MIB': ['des3828DC']}Related source files and packages:
Same file in DES-3800_v4.50.B12.mib.zip.
Same file in DES-3800_v4.50.B12.mib.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES3828DC-SWL3MGMT-MIB
{'IF-MIB': ['InterfaceIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW3800PRIMGMT-MIB': ['des3828DC']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.69.2.3.11.2.2 | swL3pimCandidateRPPriority | 0 | 0 | |
| 1.3.6.1.4.1.171.11.69.2.3.11.2.3 | swL3pimCandidateRPWildcardPrefixCnt | 0 | 0 |