Description 1
The number of times this OSPF interface has changed its state, or an error has occurred.
OID reference
1.3.6.1.4.1.171.11.69.2.3.8.1.15
The number of times this OSPF interface has changed its state, or an error has occurred.
Identification
{1 3 6 1 4 1 171 11 69 2 3 8 1 15}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DES3828DC-SWL3MGMT-MIB, the row index consists of these components in order:
swL3ospfIfIpAddress (IpAddress): four numeric subidentifiers, one per IPv4 address octet.swL3ospfAddressLessIf (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.171.11.69.2.3.8.1.15.<swL3ospfIfIpAddress: four octets>.<swL3ospfAddressLessIf>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.11.69.2.3.8.1.15
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
swL3ospfIfEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this OSPF interface has
changed its state, or an error has occurred."
::= { swL3ospfIfEntry 15 }swL3ospfIfEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this OSPF interface has
changed its state, or when an error has occurred."
::= { swL3ospfIfEntry 15 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The number of times this OSPF interface has changed its state, or an error has occurred.
Description 2
The number of times this OSPF interface has changed its state, or when an error has occurred.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swL3ospfIfEvents
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swL3ospfIfEvents",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The number of times this OSPF interface has changed its state, or an error has occurred.\"",
"::=",
"{",
"swL3ospfIfEntry",
"15",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The number of times this OSPF interface has changed its state, or an error has occurred."
],
null,
null,
null,
null
]
}Module: DES3828DC-L3MGMT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW3800PRIMGMT-MIB': ['des3828DC']}Related source files and packages:
Module: DES3828DC-L3MGMT-MIB
{'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32'], 'SW3800PRIMGMT-MIB': ['des3828DC']}Related source files and packages:
Module: DES3828DC-L3MGMT-MIB
{'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32'], 'SW3800PRIMGMT-MIB': ['des3828DC']}Related source files and packages:
Same file in DES3852R2_2-00-B16-MIB.zip.
Status in source: current.
Names: swL3ospfIfEvents
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swL3ospfIfEvents",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The number of times this OSPF interface has changed its state, or when an error has occurred.\"",
"::=",
"{",
"swL3ospfIfEntry",
"15",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The number of times this OSPF interface has changed its state, or when an error has occurred."
],
null,
null,
null,
null
]
}Module: DES3828DC-SWL3MGMT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW3800PRIMGMT-MIB': ['des3828DC']}Related source files and packages:
Same file in DES-3800_v4.50.B12.mib.zip.
Same file in DES-3800_v4.50.B12.mib.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES3828DC-SWL3MGMT-MIB
{'IF-MIB': ['InterfaceIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW3800PRIMGMT-MIB': ['des3828DC']}Related source files and packages:
Registration